HIGH-PRECISION MEASURING SYSTEM, 1% AND BETTER
NO CALIBRATION, MAINTENANCE-FREE
FROM 100kg/h -100t/h
• No moving components
• Independent from changing product properties
and flow velocity
• Gentle product flow, passive measurement principle
• Minimum operating costs
• Free product flow also if device is switched off
• Easy to integrate
The patented measuring system DYNAchute is a unique flow meter which combines proven weighing technology with contactless velocity-measurement. By measuring the weight and the flow velocity at the same time — similar to the belt-weigher principle — the mass flow rate of pourable bulk solids is determined in free fall processes with high accuracy.
Compared to impact meter, changing product-properties (e.g. density, particle size, friction properties) or varying fall velocities (e.g. under silos) have no influence on the measuring accuracy of the system. Hence a complex calibration in the process especially with several products is not required. Also regular recalibration is not necessary while a very high reproducibility of the measuring results is granted.
Operational cost can be reduced to an absolute minimum and regular maintenance is normally not required, because the flow meter does not have any moving components, the solids are flowing smoothly over the weighing chute and the sensor system is well protected.