To protect indoor machinery, the flameless explosion venting device Vigiflam VI is designed in a rectangular shape and consists of three main parts: body, filter, and a new innovative vent panel. This panel is weakened in the middle, allowing it to rupture when excessive overpressure occurs in the enclosure intended to be protected. The purpose of Vigiflam VI is to neutralize the flame effects produced during an explosion. Vigiflam VI is specifically optimized for conveyors — bucket, belt, chain, and screw conveyors — due to its compact design and low weight.

The VigiFLAP is a non-return valve designed to prevent overpressure or flame caused by a downstream explosion (dust collectors, filters, cyclones...) to propagate in the piping system. The valve is held open by a lever arm. It can be used both at the entrance and at the exit of the filter. This allows to isolate the filter from an explosion or an overpressure. In case of explosion, the valve closes and remains locked preventing the progress of the flame. The unlocking of the flap is done manually

Vision.Insights transforms blind waste streams into controlled, optimized processes – through real-time analytics for increased throughput, quality, and availability. The AI-based sensor module with deep-learning object recognition is easily installed above the conveyor belt and detects materials with granular precision in real time. Interactive dashboards provide live monitoring of material flows, alerts for malfunctions or hazards, and data-driven analyses for process optimization and quality assurance. Benefits: Intelligent plant control, precise reports, and the foundation for new sorting applications – all seamlessly integrated.

Vision.Sort brings AI-powered vision intelligence with RGB cameras to waste sorting – smarter, more cost-effective, and full of potential. The system captures the waste stream in real time, recognizes virtually every object with granular precision thanks to AI deep learning, and sorts it precisely using compressed air or other sorting methods – flexibly for almost any desired fraction. From packaging and paper to commercial waste and electronic scrap. It minimizes manual labor, maximizes purity, and creates new value streams from what would otherwise be considered waste. Your benefits: cost savings, top recycling quality, and the freedom to sort virtually anything with AI in a customized way.

The Vitomix ribbon screw mixer is a mid-shear mixer capable of ultra-short cycle times with up to 8 times more transport volume than conventional ribbon screw mixers. The Vitomix, also known as ribbon screw blender, also has a wider range of operation using tip speeds from 0.4 m/s to 6.0 m/s. This multi-functional ribbon screw mixer combines gentle mixing and mid to low shear in the one compact machine. It's ideal for the addition of liquids and creates a homogenous mixture without using lump breakers. The ribbon screw mixer is an energy-efficient mixer that reduces energy costs and saves on mixing time.

The VKT-BEND is a flow-trained elbow pipe with optimized wear protection. - steel construction with replaceable back plate - good accessibility - all standard sizes and special sizes such as leg extensions feasible - low pressure loss - low weight/easy assembly/mounting

Accurate volume measurement is a key component to tracking and capturing material inventories. Blickfeld's volume monitoring solution based on LiDAR technology and supplementary software ensures efficient inventory management through reliable real-time data. With precise information on the material stock of goods of all kinds, this type of volume monitoring enables improved and targeted planning of demand, production and overall distribution. Up until now, inventory monitoring in powder and bulk storage facilities has been a challenge for many industries. The sensors used to date are usually mechanical or have a very simple design and do not provide the information required for precise, real-time level monitoring and inventory management. Blickfeld's volume monitoring solution enables companies to react more flexibly to fluctuations and at the same time to be more efficient in warehouse management and the sale of bulk goods or recycling materials. The use of LiDAR technology for capturing material stock thus makes an important contribution to the digitization and optimization of a company's supply chain processes. Features - Accurate & precise volume monitoring based on 3D LiDAR technology - Continuous & digital monitoring of volume data in real-time - Easy to scale, multi-sensor setups for large area coverage - Remote data access via PC, laptop, tablet or mobile - Data visualization via online dashboard - ERP integration possible

The manufacture of quality products requires even dosing within extremely narrow tolerances. Leave it to us to achieve this, even with materials with the most problematic bulk properties. Free-flowing powders and granulates are dosed very precisely and purely volumetrically. The desired flow volume is set or changed by the screw speed. Gravimetrically controlled dosing is, however, essential for documenting dosing quantities. Product properties: - Dosing screw troughs optimally designed for flow characteristics - Product-specific dosing spirals and screws - Separately driven loosening agitator to ensure a uniform filling level - Dosing capacity adjustment via frequency converter or servo-controlled drives - Gravimetrically controlled dosing for the following applications: Dosing of batches, withdrawal according to setpoint specification, differential dosing according to fixed setpoint specification, differential dosing according to variable and continuous setpoint specification - Control components with standard PLC modules - Process adjustment via continuous controller adjustment - Complex process control via several PID controllers connected in series - Complete process documentation

VSR BLASTER® Air cannons and air injectors for pneumatic removal of blockages and deposit build-up in silos. Air cannons are fixed to the outside of the silos. They blast the stored compressed air at 4 to 10 bar over a wide cross-section of 50 to 150 mm in diameter in a few milliseconds into the critical interior material zones. Very often, special jet nozzles, such as the isobaric sword nozzle, for example, are used for activating wide areas. The total operating safety and maintainability of well over 25,000 VSR BLASTER® air cannons are put to the test daily. They are also easy to assemble and to control. Air cannons can be components of a cost-effective system of discharge-safe new machines or be effectively adapted to work with existing systems. VSR BLASTER® air cannons are supplied with full assembly and control accessories and can be assembled on request. Areas of application for VSR BLASTER® air cannons: Ratholing and bridging in funnels, silos, bunkers, stockpiles and hoppers with a volume of up to well over 10,000 m³. Similarly, deposits built up in pipelines, heat exchangers and cyclones are removed, even in the high-temperature areas of power stations and cement works with media temperatures of up to well over 1,000 °C. In this area, the VSR changeable nozzle system offers large cost savings through simple jet nozzle exchange. Areas of application for the VSR BLASTER® air injector: Free-blowing of funnels, pipes and filters Shock aerating of bulk goods and soil Air-blowing moulds and tools Cleaning probes and heat exchangers Delivery program: VSR BLASTER® air cannons are available in sizes from 12 to 500 l content and blasting cross-sections of DN 50, DN 100 and DN 150. VSR BLASTER® air injectors are available in sizes of 2, 5 and 8 l content.

Centrifugal force: 40 - 245.000 N Frequency: 750 – 3.600 min-1 (8- / 6- / 4- / 2-poles) For more than 70 years is VV a leading brand in the field of electrical vibratos. The wide range of electric vibrators together with extensive application knowledge, enables to offer the market a large and skilled range of solutions. Nowadays as in the past, the choice of a VV electric vibrator ensures the choice of experience combined with high quality and reliability for your applications. ATEX- and CSA-versions available

WEICON W 44 T® is a multifunctional product which, thanks to its special formula and outstanding creeping capacity, combines corrosion protection, water displacement, lubrication, conservation and cleaning in a single product. WEICON W 44 T® loosens seized threads, bolts, fittings and valves, penetrates and dissolves rust, dispels moisture from electrical contacts, prevents tracking currents and makes it easier to start wet motors. It eliminates squeaky and creaky noises on hinges, guides, bearings and all types of joints and couplings. It cleans soiled metal surfaces and leaves a long-lasting razorthin film which doesn‘t smear or stick and does not attract dust. It protects and preserves all types of tools, machines...

Today, we use our many years of expertise in the screening sector to prepare even complicated and contaminated powders for you. In our laboratory in Radevormwald, we can treat any powder materials safely, precisely and contamination-free.

WAGENER Vulcanizers GmbH & Co. KG has been an expert in vulcanizing technology since 1897. Based near Düsseldorf, we have a unique wealth of experience and specialize in the design, development and construction of transportable and stationary vulcanizing presses. Our vulcanizing presses are used for the splicing and repairing of conveyor belts as well as for cables and hand rails. With our customer-specific solutions "Made in Germany" we rely on the highest quality and satisfaction of our customers.

INNOVATIVE DUST FILTRATION TECHNOLOGY FOR A CLEAN, SAFE & HEALTHY ENVIRONMENT WAMAIR Spot polyTUBE™ is a specialised compact dust collector for handling and process machine. Its stainless-steel housing contains vertically mounted polyTUBE™ filter elements. polyTUBE™ filtration technology ensures high filtration efficiency thanks to nano-fibre media and an open-profile tubular cell structure for reduced dust residue and high performance over time. The dust separated from the air flow by special filter elements drops back into the process after an automatic pulse mechanical cleaning system has removed it: this innovative system is electrically activated, provided with isolator equipment and installed on an energy distribution plate to get the maximum efficiency. polyTUBE™ technology offers maximum filtration performance with minimum energy consumption.