Otto Ganter GmbH & Co. KG
About us
Standard Parts.
One-Stop Source.
Ganter.
Ganter is leading in the development, production and distribution of standard parts for the entire industry. The comprehensive range of products sets standards across all branches and provides our customers with a one-stop shopping experience. Quality, service and availability are therefore guaranteed, no matter the location.
Products
Clever Closure
Ball catches and magnetic catches for simple but effective closure. So often it is the small elements that make the critical difference for design and usability. Without a doubt this includes ball catches and magnetic catches that – although unseen – can significantly optimize a machine, fixture or installation in qualitative terms. This is particularly the case when flaps, covers or doors need to offer quick access but still remain securely closed. Ball catches of the series GN 4490 offer a very elegant and space-saving way to meet these requirements. The mounting block attached to the moving element engages in the ball catch precisely between the two spring-loaded balls for a positive and non-positive connection. Depending on the size and version, retaining force is between 25 and 150 Newtons. Both parts can be variably positioned, oriented either horizontally or vertically and with engagement from the front or the side. The ball catches are available in a variety of types and with various fastening options using threads or countersunk holes. If the installation situation does not permit the desired positioning, such as for mounting on aluminum profiles, this problem can be easily solved with mounting plates for ball housings GN 4490.1 or with mounting plates for mounting blocks GN 4490.2. More information on Ganter standard parts can be found on the internet at ganternorm.com
Opening and closing – with specialty hinges from Ganter
From simple hinges for welding on to multi-joint hinges with complex kinematics, the Ganter selection has everything needed for superior door and flap solutions – including extra functions. You might think that when it comes to opening and closing, all the possibilities of hinges have already been exhausted. Not even close. Ganter regularly succeeds in making further improvements to hinges, adding practical extra features or creating designs for very particular niche applications.
Highly Secure Connection
Lockable standard parts are increasingly common in machine and plant construction, but they are also used in event hardware for locking and securing a variety of parts. Ganter is now expanding its range of indexing elements to include the lockable stainless steel indexing plungers GN 814. The integrated closing mechanism protects against unauthorized or accidental operation. Lockable indexing plungers GN 814 of stainless steel have the same basic functions as Ganter’s tried and tested selection of indexing plungers. What’s new is the clever addition of a locking function for greater safety and security. This is accomplished with a lock integrated into the black plastic head. On types A and AK, the plunger pin is secured in the front position by turning the key 180 degrees and removing it. The plunger then cannot be moved out of the base position. On types E and EK, the plunger pin can additionally be secured in the rear position, offering a lockable way to prevent the plunger from engaging, which is useful in situations where the plunger pin must be kept from protruding at times. On all types, the key can also be pulled out in the unlocked position to prevent unauthorized locking. The stainless steel indexing plunger is available with two different lock versions: Lock type SC allows all indexing plungers in use to be operated with the same key, while lock type SU requires a different key for each indexing plunger. To prevent unauthorized disassembly or adjustment of the indexing plunger, the hex nut used for screwing the part in or out is only accessible while it is unlocked and the head has been pulled back. A lock nut is available as an optional accessory that can be ordered with the type designations AK or EK with the appended “K” signifying a lock nut.
Linear actuator connector configured online
Ganter is repositioning itself for linear actuator connectors and will soon beoffering connectors with individual specifications. The real-time online configurator makes this possible. Linear actuator connectors have more different parameters than Ganter‘s Standard Parts strategy could cover — until now. The market leader in standard parts is now presenting a completely new concept that combines the benefits of Standard Parts with a wide range of customization options. This customer-centric strategy is made possible by the new online configurator, which can be used to specify the central parameters of a linear actuator connector and output them in real time. The online configurator offers several advantages over the previous standard offering. In addition to the customizability, it makes the ordering process more efficient because the system immediately checks the selection for plausibility and indicates weight, price and delivery time in real time. The latter takes slightly longer than when ordering standard linear actuator connector, but the ability to enter individual specifications should outweigh this by far. Simultaneous transfer of options into 3D data sets enables the customer to immediately check whether the selected configuration fits into one‘s own design. This aspect is all the more valuable for time-critical tasks. More information on Ganter standard parts can be found on the internet at www.ganternorm.com
Securely Fastened Loads
When something needs to be lifted, a crane, ropes or chains are needed – plus anchoring points on the load itself. Ganter offers a wide range of solutions here. The classic and simplest lifting points are lifting eye bolts according to DIN 580, which are screwed into existing threads on the load. When threads are not possible, lifting eye nuts according to DIN 582 are used instead. Ganter offers these standard parts in two materials: steel and stainless steel. However, a look in the Ganter portfolio reveals far better and stronger lifting points that are optimized for specific materials and – most important – easier to handle. In particular, the integrated RFID tags are worth mentioning as a special highlight. These make it possible to clearly identify specific lifting points during wear and safety inspections and manage them digitally and without system interruption. Such RFID tags can be found in the lifting eye bolt GN 581 and the lifting eye nut GN 583, for example, which are still able to rotate around their vertical axis even after installation. Both of these options also identify load rings GN 586.1, although here the lifting eye can also be folded down. And thanks to the eye ring with ball bearing, load rings GN 5860 are fully rotatable even under load. Load rings GN 587.1 are not screwed in but welded on. This load ring is also suitable for outdoor applications since the design of the weld-on block permits a closed seam that is safe from corrosion. The ring itself can be swiveled by 180 degrees, and an optionally integrated spring can secure it in any position. The lifting point GN 589 for welding can accept loads from any direction and impresses with its minimal height. This is an extremely important feature when the maximum hook height of the lifting equipment is limited.
Aluminum Profile Systems Designed for User-Friendliness
Ganter has long offered an extensive range of accessories for building machines, systems or workstations with standard profile systems. The aluminum profiles themselves have now also been added, along with the associated connecting parts. Ganter always thinks in terms of applications – that is the great strength of the market leader in standard parts. The same is true for the newest additions to the product portfolio: system-based aluminum profiles. The anodized, extruded profiles match the dimensions and properties of the longstanding systems of Bosch and Item, with heavy and light versions, a variety of cross-sections, dimensions and slot arrangements. For some time, Ganter’s product range has included many key elements for the custom use of profile systems. These include diverse angle brackets, T-nuts and everything else for attaching parts directly and indirectly to modular profile constructions: U-handles, hinges, panel support clamps and leveling feet, just to list a few examples. Now the profiles themselves are included, as are specific connecting elements and other parts, such as cover and edging profiles, end caps, joints and foot plates. Thanks to these additions, it is now possible to build entire fixtures, machines, systems or workstations with Ganter parts – with no need to order additional parts from other suppliers, making procurement simpler and more efficient.
Smart Pneumatic Indexing Plungers
Ganter is expanding its range of indexing plungers with a technical treat. The newest addition, type GN 817.7, is pneumatically actuated and can be seamlessly integrated into automated processes thanks to state-of-the-art sensors. There aren’t actually any indexing plunger variants lacking from Ganter’s portfolio. Nevertheless, the development team consistently succeeds in integrating new functionality that opens up new application possibilities. The most recent indexing plunger development is pneumatically actuated. Plus, the part also detects both end positions with just a single sensor. This makes GN 817.7 a logical advancement over the manually operated indexing plunger GN 817.6. The new variant can also be used in hard-to-reach locations and can be integrated into automated processes. What’s more, GN 817.7 can be used as a replacement for GN 817.6 without any changes in dimensioning or signal processing. The position detection of GN 817.7 is once again based on proven magnet technology but with some important new innovations. Not only are both end positions now detected but they can also be individually defined. The sensor teaching can be performed directly on-site with a small operating element on the sensor, which is held in place by a clip and supported by a cable. There are even LEDs for visual feedback. The other option for teaching is to use the convenient IO-Link feature via the system control unit. This standardized interface makes teaching a quick affair and also allows for immediate replacement in the case of faults, which significantly reduces downtime. The high signals upon reaching the respective end positions are transmitted directly over the 4-pin M8 cable plug to the control unit of the system. More information on Ganter standard parts can be found on the internet at www.ganternorm.com
News
A Standard System for Conveying and Guiding
Individual and economical creation of perfect conveyor lines, thanks to new Ganter standard parts.
Turn to Lock
They are classic standard parts: latches. They offer a simple and obvious way to quickly close panels, doors or covers. Ganter has expanded its portfolio, adding stainless steel versions and new functional concepts.