The Stanelle-Loader Filter BELFI is used in particular in conjunction with a Stanelle loading spout for direct dedusting and dust recovery during loading processes on silo vehicles and containers. Owing to its compact design it can also be used to de-dust air conveying passages, encapsulated conveyor silos, and bunkers that are filled without pressurization. The choice of high-quality materials and the optimal surface lining make this filter ideal for applications on virtually all sectors. During the design the focus was placed specifically on the problem-free return of filter dust into the silo vehicle.

The Stanelle Mixer Filter Type MIXFI is designed for the direct dedusting of batch mixers. During the design stages the focus was placed specifically on the problem-free return of filter dust to the mixer. The choice of high-quality materials and the optimal surface lining make this filter ideal for applications on virtually all sectors.

The Stanelle overpressure/vacuum flap is a safety component for silos loaded with compressed air systems. During pneumatic loading processes the combined action of these flaps can compensate for both overpressure and vacuum generated by exhaust fans or collapsing cornices and so prevent expensive damage to vessels.

The ULUFI type filters from Stanelle are designed for dedusting loading spouts for silo vehicles, bunkers and, owing to their compact designs, for dedusting conveyor belts.

The Stanelle Filter Type ZEWAFI is a fully automatic filter with lateral mounted pressure vessel for dedusting of scales. The ZEWAFI is equipped with pressure valve, solenoid valve. Required operation air pressure 2 – 4 bar. The maximum standard operation temperature is 100 °C. In connection with Stanelle Mixing filter type Mixfi, the Zewafi / Mixfi is a proper / intelligent solution for mixing plants with weighting systems.

The ts-systemfilter star filters are manufactured in-house, so that an almost unlimited number of geometries are possible. The right filter medium is selected for each application. PPS (polyphenylene sulfide) is particularly suitable for high temperatures up to 160 °C. It is resistant to hydrolysis and has very good chemical resistance. It is also optionally available with a PTFE membrane. With this design, the support bandage is made from the filter medium and the end plates and the longitudinal seam are cast with silicone in order to achieve high temperature resistance.

THE ADVANTAGES OF THE BELT SKIRTING SYSTEMS AT A GLANCE • Optimum reduction of dust emissions and contamination thanks to skirting at the transfer point • Efficient guidance of the bulk material • Wear-resistant dust seal • Simple installation of all components of the belt skirting systems • Optimum protection of the conveyor belt • Optimized lifespans

THE ADVANTAGES OF THE TRACKING ROLLERS AT A GLANCE • The tracking rollers guarantee reliable tracking in case of conveyor belt misalignment • Low space requirement • Universal installation options • The tracking rollers are coated with special rubber featuring a diamond pattern or, as an option, with extremely wear-resistant polyurethane • Optional: tracking rollers also available in ATEX quality Robust and flexible design

THE ADVANTAGES OF THE SCRAPERS AT A GLANCE • Flawless, belt-saving conveyor belt cleaning • Low wear ensures an extremely long lifespan for conveyor belt and scraper • Toolless scraper blade replacement • Quick and easy mounting and maintenance • Optimum adjustment to the conveyor belt thanks to TWIST-SWING® • Unique, modular system • Top-quality materials: Blades made from high-performance polyurethane or polyurethane base with special tungsten carbide tips

With the STARCLEAN® ID you can always check the activities of your STARCLEAN® Conveyor Belt Cleaners - very easy, quick and safe from outside the chute.

THE ADVANTAGES OF THE IMPACT BARS AT A GLANCE • Optimum protection of the conveyor belt • The drop energy of the bulk material is absorbed • The conveyor belt is supported by the conveyor impact bed instead of idler rollers • Easy and quick to install • Eco-friendly sealing in combination with STARCLEAN® transfer point sealing • Minimum friction forces • Heat-resistant up to 75°C • Also available in ATEX quality • Available heights: 55 mm and 75 mm • T-screws (4 x M16) for optimum fastening • Available in three different variant

The STARCLEAN® RS can easily pull out segment after segment. Due to the lateral extraction of each segment from outside the chute, the whole Conveyor Belt Cleaner is very space-saving and safe especially in regard to maintenance work.

THE ADVANTAGES OF THE BELT SKIRTING SYSTEMS AT A GLANCE • Optimum reduction of dust emissions and contamination thanks to skirting at the transfer point • Efficient guidance of the bulk material • Wear-resistant dust seal • Simple installation of all components of the belt skirting systems • Optimum protection of the conveyor belt • Optimized lifespans

THE NEW DIGITAL STARCLEAN®S³ Our unique smart scraper with electric drive, in combination with our smart cloud dashboard, enables early detection of damage to the conveyor belt and predictive repair of the segments through our automatic wear detection. Thanks to the digital innovation, the scraper has the ability of self-regulating wear behavior and at the same time enables an optimized pretensioning force - completely automatically. With the principle "detect - react - protect", our innovation enables continuous, contact-based control of the conveyor belt and our scrapers. ADVANTAGES STARCLEAN®S³ AT A GLANCE • Continuous inspection • Damage limitation • Efficient use of resources • Improved operating reliability • Prevention of unscheduled conveyor belt downtimes • Transparent data analysis STARCLEAN®S³ DASHBOARD/CLOUD • Continuous monitoring of the conveyor belt • Classify the damage • Define the internal damage level • Initiate action if belt is damaged (disengagement, send information, alarm, you determine the function) • Detect the position of belt damage • Record belt characteristics TECHNICAL APPLICATIONS • Automatic or manual engagement and disengagement of conveyor belt cleaner • Automatic readjustment of the pretension • Wear indicator and warning • Constant belt damage detection by the secondary scraper • Operating hours display for belt conveyor, scraper, and wear parts • Switch-on, engagement and disengagement counter • Indicator of conveying speed and running direction • Control for up to four scrapers • RFID access with rights allocation to protect against unauthorized access Information about the belt conveyor, the scrapers, and the control system Error messages and faults

Silos fall under the legislation for structures - i.e. a static calculation according to a European-wide standard (EN 1090) is mandatory. In order to be able to guarantee a smooth process from the planning to the installation of the silo, we also consistently implement this service "in-house". This enables direct coordination between the structural design and the static requirements without detours - by way of a customer-oriented solution finding process. We use the finite element method to calculate forces in and on the silo. This enables us to perform even very complex designs and simulations. (Software: RFEM). Any questions? We will be happy to advise you!