Compact measuring amplifier with intuitive display and communication The XDK 911 can be used as a “mere” measuring amplifier with a large number of digital communication interfaces as a precise feed for a PLC or similar. Fast decentralised dosing and/or monitoring functions are possible via the input/outputs

Your strong, mobile shredder for the single stage processing of waste, waste wood, metal etc. The XR3000 mobil-e is a revolutionary machine concept in mobile waste shredding. It capitalises on many benefits of an electromechanical drive without having to forego the advantages of a mobile machine. This gives you maximum efficiency and flexibility. Advantages of the XR mobil-e All the advantages of the XR shredder in mobile form: The machine concept of the XR mobil-e shredder is exceptional. For you, this means high efficiency, high profitability and enormous flexibility. Minimal operating costs at maximum performance: The XR mobil-e shredder is a strong workhorse for shredding and recycling your different materials. The single stage processing makes this machine particularly efficient and economic. Our industrial shredders in the XR class have one particular advantage, which is of course also featured on our mobile shredder: The energy-saving UNTHA Eco Power Drive with water-cooled synchronous motor saves up to 75 % energy costs with increased efficiency in comparison to conventional diesel-hydraulic drive variants. The application possibilities of a shredder in your company are maximised through the mobile variant of the XR machine. For the shredding process, the XR mobil-e shredder is connected with the power supply using a practical quick connection.

Your efficient single shaft shredder for the powerful processing of very different materials The XR shredder represents outstanding efficiency, flexibility and reliability when shredding different material streams. Advantages of the XR2000/3000 Our low-speed single shaft shredder can cope with even the most difficult of materials. It doesn’t matter whether industrial, commercial or domestic waste, bulky waste, waste wood, metal, pulper ropes or plastic bales. The XR class shredders provide to an equal extent a strong pre-shredder for the recycling of bulky materials, or for the single-stage processing of alternative fuels. Due to the large range of different perforated screens and cutting tools, an XR shredder can be adapted precisely to your technical requirements. Depending on the material and fraction sizing, different cutting systems featuring different blade shapes are available for the RC, C and XC systems. This makes homogeneous particle sizes from 25 mm to 300 mm possible. Large quantities are no problem for the XR: The throughput lies between 10 t/h and 70 t/h, depending on the material properties and the perforated screen diameter. The system blades can easily be accessed via the service flaps, and can easily be undone via their screw connection. The slow rotor speed means that the machine is particularly resistant to foreign objects, meaning that it is protected against damage. Foreign objects can be easily and quickly removed from the shredder via the foreign object flap. An optional hard facing layer also substantially increases the lifetime of the rotors in case abrasive materials are shredded.

This belt variant is designed for high conveyor speeds. It ensures efficient material transport, smooth running, and high stability, as well as powerful continuous operation.

Yard Management System – Structure & Efficiency for Your Site Logistics The modular Yard Management System (YMS) from Rüdiger Wöhrl GmbH brings transparency, structure, and automation to your yard operations – from vehicle check-in to final loading. Whether for a compact site or a large industrial facility with high traffic, our YMS ensures clarity, control, and efficiency. Your benefits at a glance: ✔ Centralized Control & Real-Time Transparency All yard activities are captured, visualized, and managed in real time – via dashboard, mobile devices, or automated interfaces. ✔ Modular & Scalable Flexible modules such as check-in, gate control, slot management, time slot booking, and mobile yard processing can be combined to match your exact needs. ✔ Multilingual Self-Service Terminals Durable outdoor-ready terminals with intuitive design simplify driver check-in – multilingual, efficient, and available 24/7. ✔ Customized Automation From digital driver call-ups to license plate recognition (ANPR) and fully automated loading – our system adapts to your site layout and logistics processes. ✔ Seamless Integration Thanks to various interface options (ERP, TMS, WMS), the YMS integrates smoothly into your existing IT landscape. ✔ Proven Across Industries Used daily by companies in sectors like recycling, construction, chemicals, food, logistics, and manufacturing – from mid-sized businesses to global players. Solutions like YardPilot360, YardAccess360, YardSlot360, and many more modules can be individually configured – user-friendly, reliable, and future-proof. Rüdiger Wöhrl GmbH – Digitizing Yard Logistics. 📞 +49 (0) 7941 9177 0 📧 info@ruediger-woehrl.de 🌐 www.ruediger-woehrl.de

For a professional appearance of your employees, our individual care They developed corporate design concepts with their own collection and branding. ❱ Corporate fashion concepts ❱ Collection and design development ❱ Advice and sampling

Induction of powder, wetting and dispersing – with the YSTRAL Conti-TDS Dust- and loss-free powder container emptying, powder transporting and then wetting and dispersing down to a complete des-agglomeration are realised within a single machine – the YSTRAL Conti-TDS. Powders are not only wetted but dispersed into a liquid under vacuum. The formation of agglomerates is avoided. Higher efficiency incorporation of the raw materials and a better quality of the products are the natural result. The combination of processing steps in one machine results in an enormous potential for process rationalising. The essential advantages: • Production times are minimised • Partial processing steps are completely eliminated • Cost of production is reduced • Clean process due to dust- and loss-free powder induction, even for difficult to wet, sticky or dusty powders • Induction and dispersing of powders directly from silo (with intermediate buffer), Big Bag, hopper, sack, barrel, etc. • No adhesion to the vessel or installed components • Fast and reproducible adjustment of the products due to an immediate and complete incorporation of the raw materials • No induction of false air – powder transportation under vacuum in the dense phase

The predominant mixing principle An effective micro and macro mixing is mandatory to achieve a consistent quality of a product in a variety of applications. The YSTRAL Jetstream Mixer fulfils all the requirements that are necessary for a completely and homogeneous mixture in a vessel. Therefore, economy, optimised mixing efficiency and simple handling are not compromised. The essential advantages: • Effective micro and macro mixing of the complete contents in the vessel without air induction • Complete material exchange over all the levels due to a vertical mixing effect • The applied energy is converted up to 90% in a vertical stream – no rotation of the contents in the vessel • Even heavy sediments are suspended by the directed stream • No free running shaft and mixing tools • No Vortex is formed, no air is introduced • Installation to the vessel from top, bottom, side or mounted on a moveable lift • For open vessels, no special fixing devices are required

Multi-functional by exchangeable shafts and Tools The advantage of the YSTRAL Multipurpose-Elements is given by the modular set-up: exchangeable shafts and exchangeable mixing and dispersing tools. Up to now this was known primarly in the laboratory sector. With the YSTRAL Multipurpose this advantage is also applied for the production equipment. With only one machine a variety of products and volumes may be treated with the most suitable tool. For the highest demands in hygienic fields of application, all connections are sealed according to the GMP guidelines. Numerous variants for drives and lifting frames complete the Multipurpose systems. The essential advantages: • Highest flexibility provides certainty in the investment – short set-up times and simple handling • Batch sizes from 5 up to 2.000 l are covered by the X50, X100 and X200 series • Different variants for drives and lifting frames • The adapter X100/X50 offers the possibility to produce batches with a volume of 5 up to 1.000 l with the X100 system • By a simple exchange of the shafts you can use it as a Jetstream Mixer, a Dispermix, a Disperser or as a powder induction and wetting system

YTRON VacuPlant® is a universally applicable system for mixing and dispersion of powders and liquids Using vacuum to draw in powder, the VacuPlant will disperse, dissolve, deaerate and emulsify with ability to heat and cool as required. Optimised process configuration We work in partnership with our customers to develop tailor-made process solutions. Let's meet at hall 5 booth 5-M13.

Special features / Advantages • Direct incorporation of various powders via suction lance, hopper, Big Bag or connection to a sack tip station • Dispersing using powerful vacuum rotor/stator technology • Combination of dispersing and pumping without additional pump possible in many cases • Short process time • Reproducible results • Easy to maintain Let's meet at hall 5 booth 5-M13.

Cellular wheel sluice with highly wear-resistant lining for extreme stress caused by abrasive conveyed material.

The efficiency of a filter separator is determined not only by the filtration performance of the filter medium, but also by the elimination of potential leaks during the manufacturing of the filter element. The patented Remark® sealTECH solution seals the seams of filter bags by applying a liquid sealant to the seam (between the individual layers of the filter medium) immediately before sewing.

The JOEST Zig Zag Air Separator is a high-performance cascade separator for the separation of light and heavy fractions from dry, free-flowing bulk materials. It is based on the principle of multi-pass cross-flow separation, in which air is introduced from below into a zig-zag shaped channel. This allows light particles to be carried upward, while heavier components fall downward. Air routing can be configured as recirculation, partial recirculation, or suction mode. JOEST offers standard models, patented hybrid versions for fine particles, laboratory configurations, and custom solutions – ideal for applications in the recycling or food industries. The modular design enables tailored adjustments to various separation tasks.