One-piece rectangular silos

The silo is a further development of the ingma plain wall silos in plug-in construction. The new silo is airtightly welded on the inside and outside and smoothly smoothed on the inside, thus guaranteeing the best possible hygiene.

The requirements of EC Regulation No. 1935/2004 are permanently guaranteed by being made in one piece, without joints through assembly joints and smoothly welded welds in the interior, as well as when the parts in contact with the product are made of stainless steel 1.4301.

The silo body consists of a silo shaft, discharge funnel and the cell ceiling. The silo walls are manufactured in a sandwich construction, in which an inner skin made of 2.0 - 3.0 mm stainless steel sheet and an outer skin made of 2 mm steel sheet are separated by 80 mm air space. The absolute tightness of this air space in the entire silo body can only be guaranteed by manufacturing it in one piece. When storing warm material, rapid temperature differences are delayed by 80 mm due to the insulating air layer of the sandwich construction and condensate formation with the consequences of mold growth is largely avoided. The cell ceiling is designed for a traffic load of 2.5 kN / m².

The silo is manufactured in one piece and delivered in one piece after successful testing and acceptance.

The silo body has appropriate eyelets so that it can be transported both horizontally and vertically. A main crane and a smaller auxiliary crane are required for assembly. This compact design minimizes assembly costs.

The scope of delivery includes the provision of a testable but unchecked, static calculation of the silo according to Eurocode 3.

In the case of silo cells without pressure relief, appropriate protective measures must be taken to prevent sparks from entering the silo cells on site.