Square pipe construction, INGMA, made in Bad Lobenstein, is available in sizes 200 and 250 made of 3.0 mm steel sheet in painted and galvanized, in sizes 300 and 350 also in 4.0 mm wall thickness.

For abrasive products, wear protection can be optionally installed in the pipe to match the product. There are options from coatings to linings such. B. with Rhino Hyde.

The folding boxes in the INGMA track system are designed for the conveyance of granular bulk goods and adapted to the property of flatter slip. These are offered with an opening angle of 90 ° and 60 ° to achieve an inclination of 45 ° or 60 ° to the horizontal. The drives are very compact as an electric rotary drive with a limit switch integrated in the housing. In addition, the flap position can also be changed on site using a square on the side. The drives can be operated with either 15 - 30 V or 230 V. The standard protection class is IP 68 or, if requested by the customer, also for Atex Zone 22.

Silo discharge valves are made from a stable frame construction with a slide plate guided on ball bearings. The drives can be either manual, electropneumatic or electric. For drives with an electric motor, you can also choose between a rear-mounted drive with spindle or a bottom-mounted drive with gear. In the standard version, the limit switches are designed as inductive proximity switches with 24v or 230V.

With the dust-free shut-off set, the outlet slides can also be used for powdery products and ensure permanent dust-free shut-off.

It is also possible to combine it with the commercially available round pipe system using the type 1 and type 2 transition pieces. Type 1 can be used both for the transition from round to square systems and vice versa. Type 2 can only be used from round to square systems, with the advantage that construction height can be saved here.

With the silo inlet component, the baffle plate used can be replaced through the inspection opening without having to .....