The pocket filter INFA-MAT AM is a sturdy and easily mechanical cleanable filter unit. Because of the compact design the installation is also possible in case of constricted space. The proven shaking system ensures an effective cleaning of the filter cloth at low investment and maintenance costs. The modular variety of the INFA-MAT pocket filter series allows an optimum adaption of the filter units to specific needs. Several types are possible for different dedusting tasks: Vent filters with/without fan for dedusting of conveyor equipment or silos Dedusting unit with hopper and dust bin. Also available with integrated fan. Design possible as one chamber filter or multi chamber filter Bag emptying filter consisting of sack discharge, filter unit and integrated suction fan Optional secondary filter stage for residual dust contents less than 1 mg/m³ Filter surface from 6 - 180 m² for volume flows up to approx. 16,000 m³/h Operating mode: INFA-MAT pocket filters are mechanically cleaned by a shaking system after completing the dedusting process. Fans of the filter units have to be switched off during cleaning. Cleaning period is normally 30 seconds. The filter cloth with its combined pockets is easily accessible via a big front door. It is kept in a sliding frame, so that change of filter media is quickly and easily practicable.

Our BC-M coating can be used successfully for applications as a conveyor belt scraper on heavily adherent materials. The cost advantage over HM segments is that we use a continuous hard material rail over the entire length of the scraper during preparation.

Our shear beam load cells are specifically designed to measure forces through shear stress. These sensors are widely used in weighing systems and force measurement applications where precision is essential, such as production lines, weighbridges, silo's, hoppers and heavy industrial machinery. Thanks to our advanced strain gauge technology, our load cells deliver reliable and highly accurate measurements, even in the most demanding environments.

The loaders type JBM 500 are specific loaders for loading of dry, free flowing bulk solid on ships. Like all loading systems developed by Stanelle the JBM 500 Ship Loader is characterized by reliability, precision and high durability.

The innovative, electro-hydraulic fragmentation technology of ImpulsTec GmbH offers great application potential for the recycling of composites and complex industrial materials and can thus make a contribution to the development of previously unexploited secondary sources of raw materials and long-term resource conservation. With its high material selectivity, ImpulsTec GmbH's shock wave technology for industrial applications provides enhanced fragmentation at the interfaces of different materials. It is thus predestinated for applications like the separation of complex industrial materials and composites.

The SHOCK-BLOWER® reliably clears material deposits and keeps bulk solids flowing. AGRICHEMA’s SHOCK-BLOWER® system enables individual solutions for all sectors of the bulk solids industry. For over 40 years now, buildups of bulk solids have been successfully cleared with the SHOCK-BLOWER® air blast system. SHOCK-BLOWER® air blast devices store compressed air (or inert gas), then release it as needed in the manner of an explosion. SHOCK-BLOWER® air blast devices with hot-dip galvanized compressed air tanks and valve seats made from CrNi steel have been designed for a long service life and high levels of operational safety. Thanks to the unique valve technology, which pneumatically closes the piston in just milliseconds, you can save up to 50% compressed air/power. At normal temperature range SHOCK-BLOWER®s are used in transfer hoppers and chutes, dust pipes, filters, mills, sifting machines and more. At high temperature range SHOCK-BLOWER®s are used in cyclones and pipes, preheaters and heat exchangers, clinker brick chutes, grate cooler inlets, incineration plants, small-scale firing systems and lots of other places. The POWER PACK system for the SHOCK-BLOWER® is intended for use when space for installing and servicing multiple SHOCK-BLOWER® units is very tight. The POWER PACK station with 1 compressed air tank and up to 8 external valve units can be installed in easily accessible places. The exhaust points are connected via appropriate pipes, enabling air to be blasted from several meters’ distance. The strength of the air blasts is not appreciably reduced by the extra distance.

The SMS short path evaporators guarantee excellent results when evaporating, concentrating, distilling or devolatilising temperature-sensitive, high-boiling mixtures. The internal condenser minimises the pressure loss due to its short distance from the evaporation surface. Therefore, short path evaporators can operate under fine vacuum and with correspondingly low boiling temperatures. Even extremely heat-sensitive products, such as vitamins and flavourings, can be distilled without causing any thermal damage.

- hard-facing service with martensitic flux-cored wire electrode

Application areas: The MAHR shut-off valves: Uncomplicated, robust components for many different operating conditions. Shut-off valve with one flange (F1): Everywhere where flexible connection is required. A rubber or cloth sleeve (or similar) connects to the downstream element. Typical example: Between silo and weigher, sieve machines etc. Shut-off valve with two flanges (F2): Everywhere where positive connection to the downstream element is necessary. Typical example: Between silo and screw, rotary feeder etc. Three actuation types can be selected for both base units: a. Electropneumatic drive b. Gear motor drive c. Manual operation Material / design: Valve body: die cast aluminium Valve disk: material grey cast iron with neoprene rubber coating Shaft journals: material, made of C 40, with self-lubricating plastic bushes which do not come into contact with the product F1: flange on one side + sleeve nozzle F2: flange on both sides a. Electropneumatic drive: EP 80 - EP 100 - EP 125 = piston diameter b. Gear motor drive: Gear motor: Size GM2: 0.55 kW Gear motor: Size GM2: 0.75 kW c. Manual operation: H2: Hand lever 300 mm long H3: Hand lever 500 mm long Technical data: Dust-tight: alternatively pressure-tight up to 0.2 bar Sealing ring: nitrile rubber (NBR black), temperature-resistant from -30 °C to +130 °C, not suitable for food Advantages: Physical: very resistant to oils, heat and ageing Mechanical: flexible, hardly deformable, very low gas permeability Chemical: resistant to mineral oils, hydrocarbonates, water, steam, gas and vegetable oils In the case of changing the operating process, it is possible at any time to change the shut-off valves to a different type of actuation

FTK Förderband Technik Kilian GmbH Produkte werden weltweit zur Überwachung von Förderbandanlagen und Becherwerken für Schüttgüter eingesetzt. Das Produktprogramm wurde für die rauen Einsatzbedingungen in der Grundstoffindustrie wie zum Beispiel im Erztagebau und der Eisen- und Stahlindustrie entwickelt. Wo es auf Verlässlichkeit und Qualität ankommt.

Ex zone 1 and 21 Thermoplastic enclosure Suitable for the food processing industry Long life Reed contacts, coded Actuation from front Switching distance up to 6 mm With pre-wired cable Special version only for gas Ex zone 2 and dust Ex zone 22 available

SICON belt conveyor systems transport material cleanly, safely, and fully enclosed from the feeding point to the discharge point. With curve capability of up to 180°, they are ideal for confined or complex routing layouts. The closed system also ensures cost efficient operation and strong environmental performance.efficient operation and strong environmental performance.

Side-Open Weighbridge – Designed for Maximum Accessibility The side-open weighbridge from Rüdiger Wöhrl GmbH combines precise weighing performance with enhanced accessibility. Its open design without lateral barriers allows for easy vehicle access – ideal for specialized transport requirements involving wide or low-clearance vehicles. Key Benefits: ✔ Open design for maximum flexibility With no side beams or barriers, vehicles can easily drive onto or even across the scale – ideal for heavy-duty transports, low-bed trailers, or container vehicles with side protrusions. ✔ Space-saving and adaptable The compact design makes it particularly well-suited for sites with limited space. It can be easily adapted to on-site conditions and individual operational requirements. ✔ Durable and robust Heavy-duty steel construction and high-quality load cells ensure reliable long-term operation – even under tough environmental conditions. ✔ Versatile application Whether in industry, construction, agriculture, or waste management – the side-open weighbridge is suitable for a wide range of sectors and use cases. ✔ Ready for digital integration Compatible with self-service terminals, license plate recognition systems, and weighing software like RW65 – enabling seamless digital and automated workflows. Typical Use Cases: Waste management & container logistics Construction sites with limited space Agricultural operations with specialized vehicles Industrial facilities handling oversized loads The side-open weighbridge by Rüdiger Wöhrl GmbH offers unmatched accessibility and precise measurement – wherever standard weighbridges are no longer sufficient. ➡ Contact us today for a tailored solution that fits your operational needs. 📧 info@ruediger-woehrl.de 📞 +49 (0) 7941 9177 0 🌐 www.ruediger-woehrl.de

We produce our sidewall and cleats in our workshop depending on customer's request

Sidewall conveyor belts are suitable for steep angle conveying (up to 90°) of general and bulk goods. This can reduce the number of transfer points during operation. This has a positive outcome in terms of producing a mode of operation that saves energy and capital. Ambelt® offers its customers a large portfolio of possible combinations of cleats and sidewalls. Ambelt® offers its customers a large portfolio of possible combinations of belt types, cleats and sidewalls. If necessary, sidewalls and bodies of cleats can be delivered with screw connections and reinforced textile layers. Sidewall belts, customized with reinforced XE layers, are available as well. Because sidewall belts are always custom-made products, please contact the Ambelt® service team for receiving an individual offer that meets your needs. Sidewall conveyor belts from Ambelt® are used primarily in the following industries: Automotive Mining Plant Recycling The most current heights of sidewalls are also always available as rolled goods off-the-shelf.