SmartTipping is a robotic solution for micro ingredients recipes preparation. Unlimited flexibility and modularity thanks to multi-patented robotic Smart technology designed by Sacchi. SmartTipping system coordinates dosing of "n" small containers with feeding capabilities into the robot working area, in order to execute the dosing sequence, set in the recipe. The mini-batch is collected into a bucket or in a bag, codified by bar code printing or by RFID and finally conveyed to the process machines or directly poured into the mixer. Containers-feeders can be of different types and are selected according to category of products to be dosed. Screw feeder Twin-screw feeder Belt feeder Gravity feeder Containers-feeders can be fixed or removable when necessary (they can be placed in the warehouse and taken back to the production line when necessary) SmartBatch software manages all the process. The system can be directly interfaced to the factory MES software using both standard and customized protocols.

Ex zone 1 and 21 Thermoplastic enclosure Wiring compartment Spring-to-lock or power-to-lock principle Two Ex switch inserts in one enclosure Double insulated Locking force 1000 N Actuator can be repositioned by 90° on request Special version only for gas Ex zone 2 and dust Ex zone 22 available

PM series (FK type) Technical Data Our solids ball valve in two-piece design is for installation between flanges according to EN 10921, the ball is centrically counter-bearing. The solids ball valve is particularly suitable for difficult applications where dry and abrasive solids such as powder, ash, granules, etc. are used. Sizes DN 25 - DN 200 Passage Full bore Pressure ratings PN 10 - 40, ASME Class 150/300 lbs (other pressure ratings on request) Operating temperature -60 °C to +650 °C Special features Designed for demanding applications with dry, abrasive solids (powder, ash, etc.), only one preloaded spring seat ring, bearing and spring chamber sealed against contamination Mounting flange DIN EN ISO 5211 Test DIN EN 12266-1

Lanz-Anliker has been successfully active in the field of filtration for several years. The filters we manufacture are used in wet and dry filtration. We are represented with our products in chemistry, medicine, food production and drying, paper industry, aquaculture, water treatment, laundry technology, etc.. For the production of our filter media we only use high-quality synthetic screen and filter cloths. We have a large number of monofilament and multifilament fabrics made of polyamide, polyester, polypropylene, Teflon, ECTFE, ETFE, etc. at our disposal. Our quality management system according to ISO 9001:2008/ISO 13485:2003/AC:2007 and 14001:2015 is your guarantee that you will receive only first-class products.

solids Inline-Density-Meter - Patent Pending. Automated Determination of Bulk Density. High precision measuring in a closed process. Benefits: - Reduction of labor and production costs - Increase in product quality and occupational safety Applications: - Monitoring of comminution processes, granulation processes and spray dryer - Manufacturing process of 'foamed' products - Ensuring constant fill levels in packages

Pneumatic conveying systems in Hygienic Design for the food, pharma and chemical industry Hosokawa Solids Solutions developed recently a new pneumatic feeder in Hygienic Design acc. EC-guidelines and presented it on POWTECH 2010 for the first time. The solids feeder in stainless steel in appropriate alloy fullfills the HACCP- and GMP-requirements, is free of dead spots, easy to clean, CIP – capable and piggable. The mounting connections are free of dead spots, cartridge seals are FDA-approved and surfaces have a defined roughness hight. The conveyor line system with centered clamping rings is easy to dismantle, the material entry is designed as disc valve which is free of dead spots. The feeder fulfills the DIN EN 1672-2 hygienic requirements of food stuff machines. Hosokawa Solids Solutions applies this solids feeder according to the condition of the bulk solids in various pneumatic conveying systems: Dense phase pressure conveying: Fluidised powders are carried as homogeneous material-/air mixture using thrust. Push conveying: with indicated plug formation. Grainy products with close grain spectrum are streamed and “slided” as stand or plug. The plug flow is indicated by air impulse. Dense phase conveying with bypass: and nozzles or boosters for difficult bulk solids. For avoiding blockage longer plugs are being dissolved. Plug conveying with bypass, impulse valve and relay stations: plugs are generated and preserved and are slided without demixing through the conveyor pipes. Gentliest low velocity conveying for sensitive and abrasive products.

New solids Rotary valves in Hygienic Design acc. EHEDG - Guidelines The solids Rotary valve Type SRVS has been advanced by Hosokawa Solids Solutions to Hygienic Design. It is easy to dismantle and easy to clean and has been planned acc. HACCP and EHEDG -guidelines, suitable for food stuffs, with extensible rotar and optional check guide rails. All solids rotary valves of this series comply already with the new machinery directive 2000/42/EC, which has been effective since 29.12.2009. Within the required risk evaluation also have been considered the microbiological, physical and chemical demands. The GMP- / FDA-requirements and the DIN EN 1672-2 are fulfilled with measures as: in contact with product polished (interior), ground, surface quality acc. required Ra-value, all sealings without any cracks, optionally electropolished, free of dead spots. Where total freedom of cracks and dead spots is not possible, it has been paid attention to easy dismantling and cleaning. The solids Rotary valve Type SRVS is also suitable for the use under Ex-conditions. It has been tested by a well known and accredited testing center, the DEKRA – Exam. The prototype test has certified the suitability for zone 20. Therefore this rotary valve can be applied with declaration of conformity in zone 20 category 1 acc. ATEX RL 94/9/EC. Available as protection system acc. ATEX is the subsidiary series Typ SRVP. Due to this the operator has a maximum of plant safety.

Reliable technology for safe conveying of even those products that have poor flowing properties. Your advantages: - Gentle product handling and con-veying with less wear - Extremely efficient operation due to dense phase conveying - Simple interfaces - Flexible and hence transmission is possible in practically every subse-quent system - Dead zone-free design and easy-to-dismantle for quick cleaning - Problem-free use in the ex-zone - Oxygen does not enter the contain-ers when purging with inert gas - Cost-effective solution in case of confined spaces

- acc. EU-regulations and EHEDG-Guidelines - safe discharge of difficult bulk solids - no segregation - full mass flow without dead zones - no bridging - pressure shock resistant

Sanitary Fluidizer Kit assemblies are ideal for installation in hoppers or bins that contain contaminant sensitive products and require frequent inspection and maintenance. Once installed, you can perform regular inspection and cleaning as required by any preventive maintenance program. All done from the outside, without confined space entry requirements, saving time and money

Solimar´s Mini Fluidizing Disk, all the feartures of our standard disk to prevent brdging, rat holding and compacting in tight curvature situations where standard disks will not fit. Perferct for: - Tight Curvature Chambers - 100mm Diameter - Chutes, Pipes, Small Hoppers - Corner Hang-ups

Keep Dry Bulk Materials Moving Solimar Pneumatics offer a family of Silo Fluidizers that promote the discharge of dry products from storage silos, dust collectors, weigh bins and IBC`s. Solimar Fluidizer enable a uniform flow of most dry bulk materials through aeration and hopper wall vibration helps prevent briding, rat holing and compacting. Multiple disk options, including silicone rubber food grade/FDA approved (blue or white), high temperature (orange), Metal Detectable (gray) and EPDM food grade/FDA (black or white). In Germany, Austria, Switzerland and another countries your contact is Gardner Denver Deutschland GmbH in Senden / Westfalen.