Abstreifsegment bestehend aus PU Grundkörper mit eingegossenem Winkel mit Hartmetall. Maße 120mm x 120 mm

schraubbare Trommelreibbeläge

Trough chain conveyors are the ideal solution for the transport of sewage sludge, screenings, sand, and other heavy materials – from horizontal to vertical conveying paths.

... is primarily used to convey bulk materials. It is a very robust, low-maintenance conveying system designed for permanent operation. Alongside classic horizontal conveying, rising line layouts and conveyors with bends can be realised. Further processing stages can also be simultaneously integrated such as: - Collection/ distribution - Screening - Bunker discharge - Air cooling/ water cooling - Conveyor lengths up to 100 m - Conveyor capacity up to 1.500 m³/h

Trough chain conveyors are mechanical continuous conveyors with rotating traction mechanism designed for transporting bulk material by an endless chain of carriers in a closed trough. They can convey horizontally, inclined or vertically. SCHRAGE trough chain conveyors are produced as a modular system. The horizontal and vertical trough chain conveyors differ only with regard to the trough format. In the vertical trough chain conveyor a false floor is installed in the inlet area to prevent overflowing so that the product can be transported steadily into the shaft tower. The whole vertical shaft tower is equipped with a false floor so that by forced entrainment the conveying good can be transported in a continuous flow. SCHRAGE trough chain conveyors are dust and product sealed, water- and gastight versions are also possible. They feature outer or inside bearings, a drop-forged or drag link conveyor chain, sprockets with replaceable segments and wear rails, special designs on demand.

At Sinfimasa, we are experts in the custom manufacturing of trough screw conveyors which are engineered to offer maximum reliability, safety and to minimize maintenance costs. Tailored for specific plant conditions, products, and operations, our trough screw conveyors benefit from robust construction and generous dimensions, capable of reaching lengths of up to 11 meters without the need for intermediate bearings. These conveyors are ideal for receiving product flows from extraction screws, hoppers, or through direct feeding systems, such as vibratory feeders or belt conveyors, ensuring flexible and effective integration with different phases of the production process. With diameters ranging from 150 to 800 mm, our trough screw conveyors are versatile to adapt to a wide range of industrial applications and material types. Ease of cleaning is a standout feature of our screw conveyors, making them particularly suitable for industries that require high hygiene standards, such as the food, pharmaceutical, and chemical industries. To meet these demands, we manufacture our conveyors in accordance with FDA requirements and with ATEX certification for zones 21 and 22, ensuring safe handling in areas where the atmosphere could be potentially explosive. We use top-quality materials and components from leading brands, such as SEW motors and SKF bearings, to ensure optimal performance and a long lifespan. Our screw conveyors are equipped with sensors for monitoring fill levels, and speed, and detecting overloads, allowing for safe operation tailored to the specific material handling needs. Finishes, such as pickling, passivation, galvanizing, and specific customer paints, are applied to ensure durability and compliance with environmental conditions, meeting the highest standards of quality and adaptability. With our global experience and ability to deliver customized solutions, we are ready to discuss and adapt to the requirements of your project.

The electronic silo truck loading management system (LMS) CellaLoad offered by KELLER IAS is an efficient guidance system for vehicles and for reliable loading control on the factory premises, and it also includes driver self-loading. The LMS system was designed for detection, visualisation, logging and evaluation of the vehicle data and movement sequences. The integrated access manager can be configured according to the instructions provided by the factory security team to ensure an ideal traffic flow within the factory. Vehicles and persons are allowed access to the factory premises and buildings either by RFID transponder or by order code given by CellaLoad.

The capacitive measuring systems of the TRUELeVeL® series are designed for analogue level measurement. The system consists of a level probe and evaluation electronics. The analogue level measurement automatically compensates for the DK change (DK = dielectric constant) of the product to be measured. This is particularly advantageous for level measurements with changing media. For the DK compensation a "reference" measurement is carried out, for this purpose there is a reference range in the probe tip. The TRUELeVeL® probes are available in customised lengths from 400 mm to 2000 mm. The position and length of the measuring section can be freely defined within the possible measuring range and can thus be optimally determined for the respective application. There are different variants of the evaluation electronics, from analogue output voltage 0...10 V DC via current 4...20 mA up to frequency 0...10 kHz. The setting of the measurement is very simple and can be carried out completely in the empty state. The direction of action of the output signals as well as the LED display can be defined by dip switches. Sloshing movements can be faded out by an adjustable time delay (attenuator). A relay assigned to the reference section can be used as no-load protection. Advantages are: - Level measurements in containers, pipes up to approx. 5 m diameter. - For liquids and bulk solids εr ≥ 1.2 - Also suitable for inhomogeneous media due to large measuring volume detection - With appropriate mounting almost independent of the cone of repose - Probe can be used in the range from - 70 °C to + 250 °C - Insensitive to electrostatics - Automatic compensation of dielectric constants means it can also be used with changing materials without recalibration - Complete adjustment can be easily carried out in empty condition

The Vortex Titan Series TSG Gate is designed to meet the most demanding applications when handling heavy-duty abrasive materials such as sand, gravel, coal, and whole grains. The TSG Gate handles dry material in gravity flow applications where positive material shut-off and dust tight sealing is required. This slide gate is available in a wide variety of configurations with rectangular sizes and customer specific hole patterns.

The TT dosage system is energy efficient and low maintenance. Its 3m³–13m³ dimensions make it the ideal system for smaller plants.

Tube chain conveyors are mechanical continuous conveyors with rotating traction mechanism design for the in-plant transport of bulk material. As tube chain conveyers can be employed to transport bulk goods horizontally, vertically and diagonally, they can adept to almost all operating conditions. Depending on the conveyed material several changes in position can be effected by tube bends and /or deflection stations within each transport roadway. We deliver robust tube chain conveyors in various configurations: with horizontal (adjoining pipes), upright (stacked pipes) or vertical alignment in five different sizes with a delivery rate up to 80 m3/h (depending on the transported goods). Besides offering three-dimensional transporting channels and requiring little space our tube chain conveyors offer additional advantages such as a permanently dust and product-tight system, self-lining, easy maintainability, high operating life and low energy consumption. Designed as a space-saving and economic modular construction system by now the „blue“ SCHRAGE tube chain conveyors can be found in almost all bulk goods processing industry sections using process plants. SCHRAGE Plant Engineering designs, manufactures, distributes and mounts reliable tube chain conveyors for bulk goods of all kinds. For all its products SCHRAGE provides maintenance and replacement delivery services. To demonstrate the advantages of tube chain conveying we offer to bring our mobile experimental tube chain conveyor on your site. In our technical centre at Sande we have further stationary bulk conveying test devices available. After 37 years of hands-on experience we know how to convey bulk materials and can assist you to find the perfectly suited solution: we convey what you demand.

The 2-TDV and 3-TDV transport pneumatically conveyed products in powder or pellet form to or from two respectively 3 destinations (diverging or converging). The 2-TDV and 3-TDV are compactly designed and by using an additional line cylinder on the 3-TDV very accurate positioning is achieved. The diverters are designed to be easily removed from the line for cleaning (COP – cleaning out of place). It is also possible to purge the individual conveying lines with a cleaning liquid without removing the diverter from the line (CIP – cleaning in place). Removal from the line is only necessary when a complete cleaning operation is required. This gives the customer the option to chose a cleaning method tailored to suit their process. The 2/3-TDV and M-TDV tube diverter range includes USDA Dairy Accepted models.

The 2-TDV and 3-TDV transport pneumatically conveyed products in powder or pellet form to or from two respectively 3 destinations (diverging or converging). The 2-TDV and 3-TDV are compactly designed and by using an additional line cylinder on the 3-TDV very accurate positioning is achieved. The diverters are designed to be easily removed from the line for cleaning (COP – cleaning out of place). It is also possible to purge the individual conveying lines with a cleaning liquid without removing the diverter from the line (CIP – cleaning in place). Removal from the line is only necessary when a complete cleaning operation is required. This gives the customer the option to chose a cleaning method tailored to suit their process. The 2/3-TDV and M-TDV tube diverter range includes USDA Dairy Accepted models.