PU turning bar reasonably priced alternative for the cleaning of belt conveyors in the lower belt can be used twice by simply turning the bar round end-to-end PU turning bar also specifically for PVC and other types of plastic belts

The standard size of the plates is 500 mm x 500 mm with a thickness of 50 mm. The shore hardness should be chosen by customer between A 50-95 °. Baffl e plates can be quickly and easily installed using stay bolts on the back side. This PUCEST® pocket panel works on a simple principle: A portion of the conveyed material, which on the plate rebounds, accumulates in the chambers and thus assumes a buffer function. The wear effect is slowed signifi cantly this way. A further advantage of the baffl e plate is its elasticity. Coarse grained goods (for example gravel) does not crack when collision. The use of PUCEST® pocket panels with material buffer is recommended when using a grain size up to 32 mm. The PUCEST® baffl e plate with step profi le is recommended when using a grain size >32 mm. When using profi le beams of the baffl e plate the most acute impact angles of the transported material are changed for the most part into a right angle whereby the abrasion (scraping) wear effect is being signifi cantly diminished. Baffl e plates achieve thereby excellent lifetimes.

Screen linings with steel insert – for the most extreme stresses in pre-screening Noise reduction significantly lower noise level costs for passive noise protection measures can be saved. Installation and maintenance PUCEST screen linings are specially adapted for each screening machine. Time and cost savings through reduced maintenance intervals due to the long service life. Screen linings made of PUCEST are characterized by good abrasion resistance and therefore achieve many times the service life of steel screen linings. Manufactured in punched or water jet cut form, in almost any desired dimension. Also available in anti-stick design. Advantages of PUCEST screen linings long service life due to high wear resistance good abrasion resistance resistance to oils and greases and mixer protection low temperature sensitivity very good weather resistance (does not become porous) good noise damping no corrosion

Pufferringe für Tragrollen – Typ C Pufferringe fangen die Fallenergie des Fördergutes auf und schützen so den Gurt vor Beschädigungen. Die Pufferringe (Gummiringe) von FTK Förderband Technik Kilian GmbH haben einen permanent festen Sitz auf der Tragrolle und zeichnen sich durch abriebfeste Qualität aus. Neben bewährten Standard fertigen wir auch Ringe in Sonderqualität, z. B. weiß-Lebensmittelqualität, öl- und fettbeständig oder für den extremen Temperaturberiech (-40 °C bis 180 °C).

Kiepe Pull Rope Switches provide a switching system to isolate the power to conveyor systems and other process equipment in event of emergency. The devices have been designed for a maximum of safe operation under severe conditions. Kiepe Pull Rope Switches and accessories meet the requirements of international safety standards with respect to personnal safety and equipment.

We offer a wide range of conveyor pulleys available in various sizes to meet the toughest demands. Advanced design process incorporating Finite Element Analysis ensure the pulleys are designed to world’s best practice.

• up to 97% pulsation dampening • modular construction • manual and automatic air adjustment possible • can be used with any double diaphragm pump • approval according to 94/9/EC (Ex)

The SIEBTECHNIK pulsator jig is specially designed for the separation of light material from heavy material in grain size > 1 mm. This includes the separation of harmful materials from e.g. sand and gravel, slags, building rubble and contaminated soils as well as the separation of different ores. Density separation if an essential component in the processing of minerals and in recycling. For successful separation according to density, especially if there is only a slight difference in density, it is often not sufficient simply to whirl the material around in a counterflow. Rather It is necessary to provide a vertically pulsating flow through the material bed that allows the material to stratify. Advantages: - high separating accuracy - low energy consumption - low-noise - good vibration insulation - robust design - long-life time-tested components - Optimally adapted drive concept - Low-maintenance and repair-friendly - Can be integrated into existing installations

Pump Service for Industrial Pumps from Gardner Denver Transport.

Polyurethane (PUR) D44 is the most commonly used PUR material. As well as its excellent mechanical properties, it is also very resistant to wear and cracking and features high tensile strength. PROPERTIES: • Temperature operating range -30 °C to +80 °C • High abrasion resistance • Excellent tensile strength • High elasticity • Low sensitivity to temperature APPLICATIONS: • Scraper bars for snowmobiles • Scrapers of all kinds • Cladding for bunkers and chutes • Corner guards • Profiles in ship building • Coupling components • Cable guides • Impact elements SECTORS: • Mechanical engineering • Sheet metal processing industry • Glass and ceramic industry • Conveyor industry

AUMUND Push Chain Bucket Elevator The next generation of bulk material conveying The Push Chain Bucket Elevator is a patented vertical conveyor for controlled transportation of bulk materials. Its low space requirement and high equipment flexibility are important criteria for its implementation in many branches of industry, such as cement, fertilizer, ports and terminals (for loading and unloading ships), offshore loading stations, mining, minerals and metallurgy. Supported by the DBU (German Federal Environmental Association) this vertical conveyor is also a sustainable alternative compared with other Bucket Elevators.

Infrared early fire detection for small areas and conveyor Systems PYROsmart® one is the system of choice for infrared temperature monitoring of objects that can be viewed at a fixed distance and within a fixed image section. Examples of such objects are small areas, systems and transfer points on conveyor belts. The unit uses a fixed-focus, high-resolution infrared camera for detection, with the angle of view optimally matched to the application by using different lenses. PYROsmart® one is VdS certified and FM Approved! Conventional fire detectors, e.g., smoke and heat detectors, only respond to the effects of a fire (smoke, heat). Sprinkler systems then extinguish large areas without pinpoint accuracy. PYROsmart®, on the other hand, promptly detects thermal signatures and hotspots and can instigate precision cooling and/or extinguishing. Because infrared radiation penetrates dust and smoke, the system also works reliably in such environments. Belt monitoring Temperature monitoring of free-falling material and belt transfer points provides significant benefits. At these points, material gets turned over and comes into contact with oxygen. Any hotspots here can therefore become particularly warm/hot. If they had previously been concealed by overlying material, they will also only be detected here. PYROsmart® one protects against fires breaking out by quickly detecting any hot materials and hotspots entering the plant and thereby preventing fires from happening.

PYROsmart® has already proven its worth in many industries for providing the earliest possible detection of fire hazards. PYROsmart® pro uses state-of-the-art infrared and video cameras to continuously scan large areas and objects, measure temperatures and create continuous panoramic thermal imaging. PYROsmart® pro is VdS certified and FM Approved! Potential fire hazards can then be detected as they develop and before a fire starts. When critical temperatures are detected, the system locates the hotspot, triggers an alarm and reports it to a fire alarm control panel. Automatic precision cooling and/or targeted extinguishing of the hotspot is also optionally available. PYROsmart® pro is a pan/tilt system to enable monitoring of much larger areas than fixed systems are capable of. In the event of an alarm, the PYROsmart® extinguishing software controls targeted extinguishing via fire-monitor extinguishers from all major manufacturers – dynamically adaptable and automated. Hotspots can then be cooled with pinpoint accuracy before fires start, and early-stage fires can be quickly extinguished and collateral damage prevented. Unaffected areas remain protected and operational interruptions are minimized.

Infrared early fire detection with 360° all-round viewing and targeted extinguishing PYROspy® is an all-in-one infrared early fire detection system with innovative 360° all-round vision that extinguishes fires before they escalate into dangerous blazes. PYROspy® is FM Approved! Conventional fire alarm systems only detect fires at more advanced stages (e.g. with the presence of smoke/flames), but the PYROspy® series of infrared fire detectors can detect fires earlier. They “see” excessively hot material surface temperatures long before smoke or flames appear. If a potential fire source is detected at an early stage, immediate measures can be taken, i.e., the targeted automatic cooling of a hotspot. PYROspy® eco is mainly suited to monitoring small storage facilities. The maintenance-free rotation system has been tried and tested over many years and enables 360° monitoring in just 20 seconds. - Cost-effective entry into IR early fire detection scanning. - Equipped for operating fire monitors and water-mist turbines. - 10-year warranty on mechanical parts / drive electronics. PYROspy® is based on 30 years of experience in applied infrared technology and early fire detection. Our patented abiroVision software uses a range of features and intelligent, secure algorithms to detect and exclude non-hazardous hotspots with a high degree of reliability. Alarms are then only triggered if there is a real reason for them.

In addition to the requirement that neither flames nor pressure escape from the protective system, flameless venting devices should also be evaluated in terms of their relief effectiveness and weight. Because: Low efficiencies mean that more relief openings and associated protective systems are required. A too heavy weight requires conversions to the container in order to ensure its stability. The Q-Ball® E has been specifically designed for the protection of mechanical conveyors, which usually have long and sleek geometries. Based on the contour-parallel venting (CPV) invented by REMBE®, the innovative design has resulted in a low weight of the Q-Ball® E while also have a higher effectivity. While comparable products from other suppliers weigh between 100-200 kg, the Q-Ball® E is an absolute lightweight with just 25-50 kg. This particularly facilitates the handling during assembly, as well as the requirements for the installation on the systems.