KREISEL recuperators pick up waste heat from production, return it to the process in a circuit or for other energy uses. The specially-developed type K radiation recuperators generate optimal high combustion air temperatures and reduce fuel consumption significantly. Designed and built for the respective application, they are primarily used in the Glass industry for recuperative heated glass melting furnaces, Ceramics industry, Metallurgy and in other Energy-intensive industrial sectors.

Owing to the large amount of raw materials consumed in the constructi on industry and the limited availability of non-renewable resources, used products and materials should be fed back into the material cycle. This requires development of concepts and technologies for closed material cycles that focus on the recovery and reuse of raw materials. Improving resource efficiency both at the product and process level requires substituti on of specific raw materials and use of resource-saving recycled materials as well as industrial residues and by-products. To achieve this goal, it is necessary to accurately determine material flows as well as the physical and chemical characteristics of materials to identify potentials for reuse in common products or to develop new products and processes. The ultimate aim is to arrive at a consistent recycling scheme based on a functioning system of managing waste and recyclable materials. Related activities reduce the consumpti on of mineral resources whilst removing some of the burden from landfill sites and our environment in general. The opportunities generated by the life cycle approach of extraction, use and reuse require a broad service profile. Of particular interest are processes that enable upcycling and thus keep used raw materials and secondary resources in the economic cycle. Selected Services • Drafting of recovery and reuse concepts • Sustainable product design and return of components into the utilisation process • Development of recycling methods • Simulation of recycling processes to optimise related plant and machinery • Analysis of recycled materials and industrial residues and by-products • Studies for the substitution of mineral raw materials • Development of products based on recycled materials as well as industrial residues and by-products

The SPALECK Recycling Waste Screen is a vibratory screen with circular motion, powered by a three-phase AC drive. Its impact area is equipped with a blind-bottom that ensures efficient use of the screening surface, optimal material flow, and extends the lifespan of subsequent screening elements while reducing material blockages. This screen offers nearly blockage-free operation, even with varying materials, and ensures pure screening fractions with top screening quality. High performance is achieved through a maximised open screen area. Material is efficiently loosened and homogenised by combining cascades with gate bars. The design allows easy cleaning and minimal maintenance, reducing downtime. With low operating costs, it benefits from long-lasting wear parts and low electrical consumption. Screening elements are easily replaced to accommodate different separating cuts, and the sub-frame effectively compensates for residual vibrations.

Stainless steel reducers • material no. AISI 304 / 1.4301 • outer diameter: 38.0 to 168.3 mm Custom-made products possible at short notice

Reels come in many sizes, weights, and materials, making handling complex. Our lifting solutions ensure safe, efficient transport and tilting, reducing strain on employees. Many materials come in the form of reels, varying in size, weight, thickness, and fragility. They come in different types, from foil and packaging to paper manuals and print. Handling reels is complex, requiring specialised equipment for lifting, moving, and tilting. To ensure safety and reduce physical strain, we offer a range of solutions - from simple tools to advanced automated systems. Lifting and rotating reels from pallets to machines can be challenging and physically demanding. Hovmand’s Reel Manipulator: - Grips reels securely by the core for safe handling. - Rotates reels from vertical to horizontal for easy mounting. - Allows side-to-side movement for effortless lifting from pallets. - Comes in three versions: one mechanical (up to 80 kg) and two electrical (up to 200 kg). If you work with reels, you often need to mount and handle them at different heights in multiple ways. Hovmand’s Boom solutions: - “Boom – V-block” supports both fixed and loose boom mounting. - Single and double booms offer simple and effective reel lifting. - Adjustable booms allow width customisation for various reel sizes. When gripping the core isn’t possible, you must lift the reels from the outside. Hovmand’s Grip and Turn tools: - Securely grip the reel’s exterior for safe lifting and positioning. - Rotate reels effortlessly for correct mounting. - Support various sizes with lifting capacities up to 250 kg. -Offer custom grippers to ensure a firm hold without damage.

Using regenerable filter cartridges with filter media of filter class H13, the residual dust level of the former HEPA filtration can be achieved with only one filter stage. Expensive process interruptions during the filter change of the second filter stage are thus a thing of the past. In particularly sensitive areas, such as the chemicals or pharmaceutical industries, the filter module can be used as plug-in or top filter. Depending on the application, it serves as the first or second filter stage. The filter module can be used for aspiration, for vent pneumatic conveyors, as a safety filter and for many other applications. The inflow of the filter surface takes place on the raw gas side from outside to inside. The contaminated star filter is pushed into a closed container like a pneumatic tube network. Thus, the star filter can be disposed of without contamination. The filter module can be used for the controlled explosion in a pressure-resistant housing. It is flame-proof and holds back the swirled up burning dust. • 12 bar pressure resistant • Star filter with filter medium (glass fiber free): Filter class H13 Degrees of separation ≥ 99.995 % Clean gas values <1 mg/m³ Optional metal filter element • Regenerable • Suitable for potentially explosive atmospheres • Food approval • Expandable by activated carbon (e.g. for the filtration of aromatics) • Small and compact for low heights

Reißleine Stahlseil verzinkt PVC-Umantelt Rot

During industrial processes, it is often necessary to remove particles from the air or gas flow. This is done when raw materials are recovered, but also when the air flow is cleaned. The JACOB portfolio includes cyclones for this purpose in its standard range. These set the air flow in motion and rotate it. Particles are separated in the process using centrifugal force. Since cyclones are passive components, their effectiveness depends on numerous factors such as the performance of the fan. Our experts would be pleased to help you with their experience and assist you with selecting the right cyclone. Our standard range of JACOB cyclones is available in diameters ranging from 250-1000 mm with lipped connections, and cyclones with diameters from 1120-2500 mm with welded-on flanges. If our standard range does not have the right size for a special challenge that you have, JACOB will manufacture cyclones to your specification.

Since June 2024, the new remote signal module MSM-5 will be available. Colourful LED displays show the status of the monitored silo components and additionally a segment display of the differential pressure in the filter apparatus. The remote signal module (MSM-5) is installed in the control panel. It indicates the differential pressure in the filter apparatus, provides messages about the filter operation and can monitor the silo for overpressure and overfilling as a silo safety device. For this purpose, a level indicator in the silo and a pinch valve in the delivery line must be installed on site. The MSM-5 is operated in conjunction with the SCD 10.12 filter control unit, which provides the power supply of 24 V DC. The filter control unit provides 5 different digital signals and a 4-20 mA signal corresponding to the differential pressure. There are 4 outputs, a digital pressure display and LEDs (green, yellow, red) for displaying the actual state. Even with external filters, it can be integrated into an existing system at any time.

Ideal for quick repairs on damp and wet surfaces and for underwater applications. For the repair and sealing of cracks, holes, and leaks in petrol and water tanks, radiators, electrical switchboards, sanitary installations and swimming pools. The WEICON Repair Stick Aqua can be used in sanitary and heating system construction, electrical equipment, the maritime sector and many additional industrial applications.

The WEICON Repair Stick Copper is suited for the very quick repair (processing time: 3 min.) of cracks and leaks even on damp and wet surfaces such as pipes, pipe bends, fittings, flanges, copper gutters, sheets, water heaters, water tanks, hot, cold water lines, freezer and air conditioning systems. The WEICON Repair Stick Copper can be used in tank construction and apparatus engineering, in the foods, cosmetic and pharmaceutical industries and in many other applications.

The all-round product for quick, elastic and non-shrink repairs and touch-ups on nearly all surfaces. Repair Stick Multi fills and seals cracks, holes, damages and leaks. It can be used on metal, wood, stone, ceramics, plastic and many other materials. Due to its versatile use, WEICON Repair Stick Multi is suitable for industrial applications as well as for crafts or DIY projects.

For non-corrosive repair and reconditioning of stainless steel and other rustproof metals, such as those in tanks and containers, filling and packing machines, pipes, lines, pumps and housings. Due to the quick mechanical loading capacity of the mended parts (approx. 60 minutes), expensive and longer downtimes are avoided. The WEICON Repair Stick Stainless Steel can be used in tank construction and apparatus engineering, in the foods, cosmetic and pharmaceutical industries and in many other applications.

It is particularly suited for the fast and high-strength repair and bonding of metal parts and for the patching and sealing of cracks, holes, and leaks in machine parts, tanks and pipelines, containers, pumps and housings, balcony railings, banisters, and torn-out threads. The WEICON Repair Stick Steel can be used in machine and system construction, in tank construction and apparatus engineering, in the foods, cosmetic and pharmaceutical industries and in many other applications.