• up to 97% pulsation dampening • modular construction • manual and automatic air adjustment possible • can be used with any double diaphragm pump • approval according to 94/9/EC (Ex)

The SIEBTECHNIK pulsator jig is specially designed for the separation of light material from heavy material in grain size > 1 mm. This includes the separation of harmful materials from e.g. sand and gravel, slags, building rubble and contaminated soils as well as the separation of different ores. Density separation if an essential component in the processing of minerals and in recycling. For successful separation according to density, especially if there is only a slight difference in density, it is often not sufficient simply to whirl the material around in a counterflow. Rather It is necessary to provide a vertically pulsating flow through the material bed that allows the material to stratify. Advantages: - high separating accuracy - low energy consumption - low-noise - good vibration insulation - robust design - long-life time-tested components - Optimally adapted drive concept - Low-maintenance and repair-friendly - Can be integrated into existing installations

Pump Service for Industrial Pumps from Gardner Denver Transport.

Polyurethane (PUR) D44 is the most commonly used PUR material. As well as its excellent mechanical properties, it is also very resistant to wear and cracking and features high tensile strength. PROPERTIES: • Temperature operating range -30 °C to +80 °C • High abrasion resistance • Excellent tensile strength • High elasticity • Low sensitivity to temperature APPLICATIONS: • Scraper bars for snowmobiles • Scrapers of all kinds • Cladding for bunkers and chutes • Corner guards • Profiles in ship building • Coupling components • Cable guides • Impact elements SECTORS: • Mechanical engineering • Sheet metal processing industry • Glass and ceramic industry • Conveyor industry

AUMUND Push Chain Bucket Elevator The next generation of bulk material conveying The Push Chain Bucket Elevator is a patented vertical conveyor for controlled transportation of bulk materials. Its low space requirement and high equipment flexibility are important criteria for its implementation in many branches of industry, such as cement, fertilizer, ports and terminals (for loading and unloading ships), offshore loading stations, mining, minerals and metallurgy. Supported by the DBU (German Federal Environmental Association) this vertical conveyor is also a sustainable alternative compared with other Bucket Elevators.

Infrared early fire detection for small areas and conveyor Systems PYROsmart® one is the system of choice for infrared temperature monitoring of objects that can be viewed at a fixed distance and within a fixed image section. Examples of such objects are small areas, systems and transfer points on conveyor belts. The unit uses a fixed-focus, high-resolution infrared camera for detection, with the angle of view optimally matched to the application by using different lenses. PYROsmart® one is VdS certified and FM Approved! Conventional fire detectors, e.g., smoke and heat detectors, only respond to the effects of a fire (smoke, heat). Sprinkler systems then extinguish large areas without pinpoint accuracy. PYROsmart®, on the other hand, promptly detects thermal signatures and hotspots and can instigate precision cooling and/or extinguishing. Because infrared radiation penetrates dust and smoke, the system also works reliably in such environments. Belt monitoring Temperature monitoring of free-falling material and belt transfer points provides significant benefits. At these points, material gets turned over and comes into contact with oxygen. Any hotspots here can therefore become particularly warm/hot. If they had previously been concealed by overlying material, they will also only be detected here. PYROsmart® one protects against fires breaking out by quickly detecting any hot materials and hotspots entering the plant and thereby preventing fires from happening.

PYROsmart® has already proven its worth in many industries for providing the earliest possible detection of fire hazards. PYROsmart® pro uses state-of-the-art infrared and video cameras to continuously scan large areas and objects, measure temperatures and create continuous panoramic thermal imaging. PYROsmart® pro is VdS certified and FM Approved! Potential fire hazards can then be detected as they develop and before a fire starts. When critical temperatures are detected, the system locates the hotspot, triggers an alarm and reports it to a fire alarm control panel. Automatic precision cooling and/or targeted extinguishing of the hotspot is also optionally available. PYROsmart® pro is a pan/tilt system to enable monitoring of much larger areas than fixed systems are capable of. In the event of an alarm, the PYROsmart® extinguishing software controls targeted extinguishing via fire-monitor extinguishers from all major manufacturers – dynamically adaptable and automated. Hotspots can then be cooled with pinpoint accuracy before fires start, and early-stage fires can be quickly extinguished and collateral damage prevented. Unaffected areas remain protected and operational interruptions are minimized.

Infrared early fire detection with 360° all-round viewing and targeted extinguishing PYROspy® is an all-in-one infrared early fire detection system with innovative 360° all-round vision that extinguishes fires before they escalate into dangerous blazes. PYROspy® is FM Approved! Conventional fire alarm systems only detect fires at more advanced stages (e.g. with the presence of smoke/flames), but the PYROspy® series of infrared fire detectors can detect fires earlier. They “see” excessively hot material surface temperatures long before smoke or flames appear. If a potential fire source is detected at an early stage, immediate measures can be taken, i.e., the targeted automatic cooling of a hotspot. PYROspy® eco is mainly suited to monitoring small storage facilities. The maintenance-free rotation system has been tried and tested over many years and enables 360° monitoring in just 20 seconds. - Cost-effective entry into IR early fire detection scanning. - Equipped for operating fire monitors and water-mist turbines. - 10-year warranty on mechanical parts / drive electronics. PYROspy® is based on 30 years of experience in applied infrared technology and early fire detection. Our patented abiroVision software uses a range of features and intelligent, secure algorithms to detect and exclude non-hazardous hotspots with a high degree of reliability. Alarms are then only triggered if there is a real reason for them.

In addition to the requirement that neither flames nor pressure escape from the protective system, flameless venting devices should also be evaluated in terms of their relief effectiveness and weight. Because: Low efficiencies mean that more relief openings and associated protective systems are required. A too heavy weight requires conversions to the container in order to ensure its stability. The Q-Ball® E has been specifically designed for the protection of mechanical conveyors, which usually have long and sleek geometries. Based on the contour-parallel venting (CPV) invented by REMBE®, the innovative design has resulted in a low weight of the Q-Ball® E while also have a higher effectivity. While comparable products from other suppliers weigh between 100-200 kg, the Q-Ball® E is an absolute lightweight with just 25-50 kg. This particularly facilitates the handling during assembly, as well as the requirements for the installation on the systems.

Plant components like silos, mills, filters, collectors, mixers or dryers, in which bulks are processed, conveyed or stored are hazardous areas where fine dust can be found in quantities. Explosion solutions are required when ignition sources cannot be reliably prevented. With use of the Q-Bic™ safety suppression system, the starting explosion is instantly detected by the redundant related detectors and the prompt blowing of dry powder within the endangered area extinguishes the flame. The explosion is extinguished at the point of ignition and cannot be discharged to the outside atmosphere. Q-Bic™ is especially suitable for applications with toxicants, which must not be released in case of explosion.

Isolation is a decisive component of an Explosion Safety concept. No matter how much operators invest into (flameless) relief - if an isolation is missing, an explosion can spread within the system, and continue to propagate from facility section to facility section. In the worst case, the blast wave will overtake the flames, and the explosion will turn into a detonation. If a sensible isolation is part of the system protection strategy, then there's no reason to worry about such horror scenarios any longer. The Q-Flap RX™ explosion isolation flap valve is a joint development between REMBE® and the Swiss company RICO. "A combination of German engineering and Swiss precision", that's how Dr.-Ing. Johannes Lottermann, Director for Explosion Safety at REMBE® describes the new product. The strict requirements of EN 16447 for the maximum safety and reliability are particularly achieved by the very high strength and extremely flexible installation distances - and all of this thanks to the patented swivel carriage principle. The Q-Flap RX™ is available for all common nominal pipe sizes up to DN 1250.

Stay Qool – REMBE Q-Rohr Innovation is a tradition at REMBE. In the area of explosion safety, the invention of flameless venting solutions – the Q-Rohr and Q-Box – is probably the most important in the history of the company. We have continuously developed and improved these products since the 1980s and they are now in use worldwide. The Q-Rohr and Q-Box can be found in a whole range of sectors from the food processing industry to chemicals and pharmaceuticals. The advantages of flameless venting are immediately obvious: the entire production process remains inside the building and there is no need for expensive, bulky venting ducts that require modifications to be made to existing structures. The integrated explosion vent is fitted with a signalling unit that immediately reports any incidents to the process control system. The special stainless steel mesh filter inlet ensures that the pressure rise and increased noise level associated with free vented explosions are massively reduced to negligible levels in the production room. Dust and flames are retained by the mesh filter inlet. The Q-Rohr has a round design. Consequently, it is vacuum resistant and ideal for the protection of pneumatic conveying systems as well as many other applications. The Q-Rohr and Q-Box also compare favourably with active fire extinguishing systems. They generate no running costs, false triggering damages only the bursting disc and the product remains unaffected. No regular maintenance is required, an annual visual inspection is more than adequate. The products are certified by ATEX and also comply with many other currently relevant standards. New: The Q-Rohr can now also be used with metal dusts. Due to their extreme properties in explosive situations (e.g. temperatures can be twice as high as those with most other dusts), metal dusts create special challenges for protection systems. The Q-Rohr is the first system to be certified in accordance with DIN EN 16009.

QbVolume continuously captures and processes 3D data on-device, providing volume information on various goods and materials. The integrated, user-friendly software is fully customizable, enabling remote and automated volume monitoring of diverse goods and materials.The sensor also supports measuring silo fill levels and determining pallet’s loading volumes. QbVolume offers reliable detection in both indoor and outdoor environments, consistently performing in harsh weather and lighting conditions as well as dusty surroundings. Designed for high durability, QbVolume is maintenance-free and has an IP67-rated housing.

The modular image analysis sensor QICPIC combines size and shape analysis of disperse particle systems within a size range of 1 µm to 34,000 µm. Flexible sensor adaptation for analysis of powders, granules, fibres, suspensions and emulsions is provided by a wide range of dispersing and dosing units. Numerous implementations in pharmaceutical and chemical industry, food and beverage technology or soil science just denote the array of applications in industry and research. The extremely short exposure times ensure capturing and clear imaging of even fastest singular particles. With powerful algorithms QICPIC is evaluating millions of particles in shortest time and guarantees outstanding statistically relevant results. The unrivalled, high speed RODOS dispersion empowers image analysis to master fine, dry and even agglomerating powders now as fine as 1.8 µm and above. Most prominent features are reproducibility and comparability of measurement results at optimized sample quantities. Powerful evaluation software supports the simultaneous determination of all relevant size and shape characteristics. Due to modular placed disperser and dosing units the analyser fits flexible for dry and wet applications generating product-specific characterisation: Dry Applications » RODOS | injection disperser for finest, even cohesive dry powders | 1.8 µm to 4,000 µm » GRADIS | gravity disperser for coarser, even fragile dry particulate systems | 1.8 µm bis 18,000 µm » FIBROS | pre-disperser for gentle separation and feeding of dry, even curly fibres (in combination with GRADIS) | fibre thickness 1.8 µm to 5,000 µm, fibre length 500 µm to 30,000 µm Wet applications » SUCELL/L | wet disperser for emulsions and suspensions | 0.55 µm to 2,000 µm » LIXELL + LIQXI | dispersing and dosing combination for suspensions and emulsions | 0.55 µm to 500 µm Specialties » OASIS | combined dry and wet disperser consisting of RODOS & SUCELL | 0.55 µm to 4,000 µm

Machines used in extreme environments require roller bearing housings that operate reliably and efficiently even under the toughest conditions. The spherical roller bearing housing units made of cast steel have been specially developed for demanding applications. The combination of robust cast steel housings and Timken high-performance spherical roller bearings provides effective protection against contamination, especially in conjunction with modern primary and secondary sealing systems. Optional steel covers provide an additional protective barrier against external influences and harsh environmental conditions. Thanks to the spherical roller bearings in solid housings, these units can be used reliably even with shaft misalignments of up to 1.5° without compromising the expected service life or operational reliability.