Cleaners Conveyor belt cleaning systems are considered more intensely these days, since they reduce the maintenance services on conveyors handling wet or sticky material and they allow higher or maximum productivity. There are several types of cleaning equipment. The most used for ease of application are those with scraper blades mounted on rubber flexible supports. Covers Conveyor covers have primary importance when it is necessary to protect the material conveyed from bad weather conditions and therefore improve the functionality of the plant but importantly, to protect the environment from possible polluting elements due to the dispersion of dust in respect of the latest health and safety regulations in force. Impact bars Impact bars are used at the loading point of the conveyor under the hopper.

Application area The MAHR Additional Nozzle ZD is installed in delivery lines of high pressure conveying systems and in fact mainly after the special tube valve SP. Carrier gas is also fed into the delivery line using this. The dust / gas mixture is varied by changing the nozzle insert. Material: Case: grey cast iron, cast aluminium, cast stainless steel Nozzle: grey cast iron, cast stainless steel Design: The Additional Nozzle ZD consists of the nozzle case and the nozzle insert. Depending on requirement, the insert can be drilled out up to a specified diameter. Special features: Due to the tangential arrangement of the air connection, the air inlet is largely vortex-free.

Adhesive Spray extra strong is a special formula for strong and permanent bonds on rough and uneven surfaces. A special valve allows the adhesive quantities to be adjusted with infinite variability. WEICON Adhesive Spray extra strong can be used for the bonding of felt, PVC foil, imitation leather, carpets, plastics, cardboard, foam and cellular rubber, insulating materials, soft foam, vinyl, leather, rubber, metal and wood. It is also suitable for large-area adhesive bonding.

The agglomerate crushers made by Barl Maschinenbau GmbH are usually equipped with exchangeable beaters. As a standard feature, the integrated cleaning covers ensure quick and easy cleaning. Dependent on the size of the unit, the maximum permissible feed size is between 50 and 100 mm. Again, dependent on the equipment and unit size, the end-product size ranges between 10 and 15 mm. The agglomerate crushers are suitable for agglomerates but not for hard and compacted rock-like structures. The bulk material must be metered to the agglomerate crusher because it is not suitable for operation in flooded feed condition. The coupling are as standard as the external bearing. The agglomerate crusher are naturally also available in both pressure-shock-proof!

Air classifiers are installed as standalonemachine or in combination with a Universal Mill or a Gap Mill in order to achieve a more precise particle distribution or a strictly defined maximum particle size. • shock pressure resistant up 10 bar(g) • certified according ATEX - 2014/34/EU • available in carbon or stainless steel materials MAIN APPLICATIONS: • cocoa-mix • metal powder • alumina • lactose

Air Conditioning Filters manufactured by BWF Envirotec, Poland stand for unsurpassed filtration performance. Filters are available for various filter classes as well as from different filter media and for various applications. BWF Envirotec, Poland manufactures non-standard dimensions filters upon request according to drawings and specifications. That way our customers are assured the best technical solution for their filter systems. As always, we focus on ensuring the maximum performance of your filter system. Our application technology allows for individual consideration of the customer's filtration process - Required emission values - Required service life A selection of the best filter medium and frames for your air conditioning filter - Product range of Air Conditioning Filters: - Pocket filters - Filters for painting walls - Hauben pocket filters - High temperature filters HT - Fine filters - Roller filters - Cassette filters - Absolute filters - Activated carbon filters - Activated carbon - Wedge filters - Multi pockets - Compact filters - Glass pocket filters - Metal grease filters - Compact carbon filters - Columbus filters - Filter mats - Filtering foam - Filters with carbon mat - Mounting frames - Sludge bags

The Air Cone Separator from JOEST reliably separates light fine material from heavy coarse material – even in complex material mixtures. It is based on a proven cross-flow separation method with an additional counter-flow separation zone for targeted post-separation of the light fraction. The system is highly versatile and can be used, for example, for alternative fuels, plastic granules, wood pellets, or recycling materials such as shredded used tires. Depending on the requirements, JOEST offers various designs – for particularly dust-intensive processes, high volume flows, or poorly free-flowing materials. Thanks to its compact design, high throughput capacity, and precise separation accuracy – even with fibrous or flat materials – the Air Cone Separator is a cost-effective solution for numerous industrial applications.

Application area: The air conveyor trough is used for the horizontal transport of dust-like materials. Grainy products cannot be transported on it. Depending on type of product and delivery rate, the trough must be installed with an inclination of 5° - 7°. Material: Trough case: St 1203, AIMg 3 or material 1.4541 and 1.4571 Loosening plate: plastic fabric, sintered plastic or sintered metal (tin bronze or VA) Seal: Rubber Design: The air conveyor trough consists of upper and lower boxes which are separated by the porous loosening plate. The loosening air is blown into the lower box while the product to be conveyed is brought to flowing in the upper box as a result. Both boxes are firmly bolted to each other and sealed against each other. The troughs are manufactured in lengths of maximum 2,500 mm and can be bolted together into any lengths. Appropriate inlet and outlet connectors for this are also supplied. A standard fan is usually used as air source which is firmly mounted onto the air slide. Each trough part has a hand hole according to the drawing. Electrical equipment: A special motor on a rocker is used as drive motor for the ventilation fan. Protection type and voltage are according to customer requirement. Operating data: Air quantity / m2: dependent on the trough inclination and porous medium Air pressure: dependent on porous medium Special features: When using this conveying trough, gentle conveying of powder material can be guaranteed. There is only low wear as, in contrast to mechanical conveying equipment, e.g. screw conveyors, no rotating parts are used. The loosening plate has a long service life and can be frequently regenerated after soiling. The hand holes enable checking the conveying and to perform mechanical cleaning without removal of the trough. Any number of inlets and outlets can be attached to the trough. Conveying distances do not play any role if sufficient height for installing the trough is available.

Mobile Windsifter AirBasic: The AirBasic brings the advantages of our proven windsifter technology to a small, mobile machine. It is available in different options to ensure optimum separation results at any location. Material can be fed in any direction (180 °). It has a patented adjustable and precise nozzle system that works much more efficiently than comparable products on the market. Thanks to our standardized production process, it can be delivered fast, regardless of the version or options selected. Fully equipped, it fits into only one 40ft HC container.

Vacuum windsifting system AirLift: Our vacuum windsifting system AirLift is conceived to remove impurities from material flows with similar specific densities. Thanks to its modular design it can be easily integrated into existing recycling plants. The operating width can vary between 1000 mm up to 3500 mm.

AirScrape is the first contactless belt skirting system worldwide. It is developed, patented, and manufactured in Germany and it meets the highest standards of quality, safety, and environmental protection. With its unique technological solution, it is the world’s first and only contactless skirting system that reaches an effectivity of near 100%.

The (R)Evolution in Screening! With our innovative complete system consisting of air bellows, controls and other components, we optimally isolate every screening machine from the steel construction. This can mean for you, among other things: Protection / Increased lifetime of screening machines Energy saving or more production Calmed structural steelwork / less damage Reduced Noise Emission Rarer and easier maintenance Increased work safety