The SIEBTECHNIK banana screening machine is used to screen grainy bulk goods. Drive takes the form of either double unbalance gear units (type BHG), circular-motion vibrating drives (type BV) or unbalance motors (type BHR). The SIEBTECHNIK banana screening machine achieves good separating accuracy at an extremely high feed rate and with difficult-to-screen material. Its operational behaviour makes it a high-speed screen. Compared with conventional vibrating screens, the banana screen handles a considerably larger feed quantity for the same screen area.

Each belt scale is planned individually according to your needs, constructed and installed on existing conveyors. We combine the belt scale with the necessary weighing range (5-4000 t / h, accuracy 0.5 to 2%) and select the appropriate version to your operating conditions. Range: 400 to 1000 mm. Larger bandwidths or special designs on request. Industrial Quality The solid design of the structure and its high life span is designed for continuous operation in industrial environments. Different versions All belt scales are lacquered, galvanized or stainless steel. Against surcharge also in other RAL colors. Compact design Low space requirement is ensured by the compact design. IP degree of protection Depending on the load cell following degrees of protection are met: IP67 / 68 / 69K. Fast weight determination Our rugged construction, load cells and weighing terminal with very high quality, and optimized programming provide a fast and accurate weight determination. Quick and easy cleaning Due to the compact design quick and easy cleaning is guaranteed. Locations Belt scales are widely used where bulk currents must be measured continuously. Feeders are widely used where bulk materials must be continuously metered and transported. Depending on the nature of the bulk material, the local conditions and the accuracy requirements single or multi-role systems are used

Our SPALECK bar sizers and finger screens are the ideal solution for pre-separation and coarse screening of a wide variety of bulky screenings. The SPALECK bar sizer is designed as a linear vibrating screen and is driven by two unbalance motors. The individually arranged bars allow screening with different gap widths. The individually arranged bars allow screening with different gap widths. The design of the bar decks prevents clogging, achieves almost maintenance-free operational safety and guarantees versatile application possibilities. The individually adjustable and replaceable screen bars can be easily modified.

Batch production units for fludi bed processes, like spray granulation, spray agglomeration, coating, micro-encapsulation. ex-proof. cleaning concept.

Suitable for the following production processes: • Mixing of powders / granules / flakes / fibers / pastes • Wetting of solids with one or more liquids • Granulation by injecting a binding liquid • Film coating by injecting a liquid on a powder and then adding a second powder • Heating /cooling / temperature keeping Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance

With the batch type single shaft mixers WBH it is possible to reproduce products with different characteristics in a very fast and careful way.

In addition to the known benefits of the WBH mixer, the WBHP and WBHT equipment guarantees a fast and residue-free discharge of the mixing product.

We have clearly redefined mobile bolting to new levels. With the new DA2 battery tool Plarad is introducing to the market place a successor to the previously brilliant predecessor tool the DA1. A decisive step forward has been achieved with the newest gearbox technology which enables simpler handling, reduced weight and size. Mobile cordless bolting is now safer due to the additional automatic locking of the motor and gearbox. Versions of the tool are available up to a maximum output of 4800 Nm. Optional Diagnostic Setting Software with power step lock and tool diagnostics enables the tool to be optimally set up for your specific bolting application.

Our Battery.Sort solution prevents fires caused by dangerous lithium-ion batteries in recycling plants – before they even start. The system uses X-ray technology and AI algorithms to precisely detect batteries, even if they are hidden inside electronic devices or buried under up to 50 cm of waste. It then safely removes them with compressed air. Objects weighing up to 9 kg can be easily sorted. Installed directly after the container opener or pre-shredder, it reliably protects facilities (e.g., for lightweight packaging, commercial waste, WEEE, or residual waste) from massive fire damage. Benefits: Increased safety, efficient raw material recovery such as lithium, and optimized processes for waste management companies.

Bulk goods are among the most frequently transported goods - with the special feature that they are always stored openly or loosely. We build the necessary hall for every type of bulk goods - e.g. for weather-sensitive goods, a bulk goods hall designed accordingly. At first glance, building a hall seems relatively simple. In practice, it often turns out that it is all about the details. It is not just the bulk density or the layered material pressure that plays a role, but also, for example, the height of the hall. Bulk goods halls are often a question of static safety, where the load transfer must be taken into account. In addition, not all bulk goods are the same. Every bulk material has its own special requirements. This must be considered in advance when designing the hall. We know what to look out for when building bulk goods halls. Halls in which bulk goods are to be stored must be tight and clean. This means that the building shell takes on a special function with regard to temperature and humidity or dryness when storing bulk goods. In addition, the ventilation system is the be-all and end-all for a good hall climate. For bulk goods halls, the special equipment is often important. Various means of transport with different load carriers are available for transport. We will find the optimal location for bulk goods boxes, ventilation ducts, walkways and conveyor belts for you. Of course, we install the appropriate sliding walls or folding walls for removing the bulk goods and also plan a practical residual emptying system.

Bauermeister Portfolio Flyer

With a WAGNER bagging machine, you remain flexible, even with regard to other containers that may need to be filled in the future. With special interchangeable filling spouts, you can fill a wide variety of containers with the same machine, such as drums, buckets, cans, bags, bag-in-boxes, valve bags, open bags, etc. Conversion to a different filling spout is quick and easy thanks to the practical quick-release fasteners and can be done in a matter of minutes. In combination with a pallet scale, not only small containers but also big bags can be dosed accurately with the same machine.

The Beater Blade Mill SMM is used for the grinding of products with a high fat content e.g. Cocoa nibs and hazelnuts.

Belt Conveyor • Belt widths 500, 650, 800, 1000, 1200 mm • Center distances up to 300 m as standard solutions and customized solutions for larger center distances • Use of standard and heat-resistant special belts • Wear lining for abrasive bulk materials (polyurethane, Hardox, composite armor plates) • Consulting, planning, design, production, delivery, and installation from a single source • High reliability thanks to high-quality components • Durable and easy to maintain • Modular system design • Made in Germany