Induction of powder, wetting and dispersing – with the YSTRAL Conti-TDS Dust- and loss-free powder container emptying, powder transporting and then wetting and dispersing down to a complete des-agglomeration are realised within a single machine – the YSTRAL Conti-TDS. Powders are not only wetted but dispersed into a liquid under vacuum. The formation of agglomerates is avoided. Higher efficiency incorporation of the raw materials and a better quality of the products are the natural result. The combination of processing steps in one machine results in an enormous potential for process rationalising. The essential advantages: • Production times are minimised • Partial processing steps are completely eliminated • Cost of production is reduced • Clean process due to dust- and loss-free powder induction, even for difficult to wet, sticky or dusty powders • Induction and dispersing of powders directly from silo (with intermediate buffer), Big Bag, hopper, sack, barrel, etc. • No adhesion to the vessel or installed components • Fast and reproducible adjustment of the products due to an immediate and complete incorporation of the raw materials • No induction of false air – powder transportation under vacuum in the dense phase

The predominant mixing principle An effective micro and macro mixing is mandatory to achieve a consistent quality of a product in a variety of applications. The YSTRAL Jetstream Mixer fulfils all the requirements that are necessary for a completely and homogeneous mixture in a vessel. Therefore, economy, optimised mixing efficiency and simple handling are not compromised. The essential advantages: • Effective micro and macro mixing of the complete contents in the vessel without air induction • Complete material exchange over all the levels due to a vertical mixing effect • The applied energy is converted up to 90% in a vertical stream – no rotation of the contents in the vessel • Even heavy sediments are suspended by the directed stream • No free running shaft and mixing tools • No Vortex is formed, no air is introduced • Installation to the vessel from top, bottom, side or mounted on a moveable lift • For open vessels, no special fixing devices are required

Multi-functional by exchangeable shafts and Tools The advantage of the YSTRAL Multipurpose-Elements is given by the modular set-up: exchangeable shafts and exchangeable mixing and dispersing tools. Up to now this was known primarly in the laboratory sector. With the YSTRAL Multipurpose this advantage is also applied for the production equipment. With only one machine a variety of products and volumes may be treated with the most suitable tool. For the highest demands in hygienic fields of application, all connections are sealed according to the GMP guidelines. Numerous variants for drives and lifting frames complete the Multipurpose systems. The essential advantages: • Highest flexibility provides certainty in the investment – short set-up times and simple handling • Batch sizes from 5 up to 2.000 l are covered by the X50, X100 and X200 series • Different variants for drives and lifting frames • The adapter X100/X50 offers the possibility to produce batches with a volume of 5 up to 1.000 l with the X100 system • By a simple exchange of the shafts you can use it as a Jetstream Mixer, a Dispermix, a Disperser or as a powder induction and wetting system

Continuous bucket conveyors are specially designed to convey bulk materials from one or more feed points to a central discharge. The conveying paths can be horizontal, vertical or inclining without any additional transfers. NERAK continuous bucket conveyors are very adaptable where space is limited. The assembly with no moving parts is capable of high conveying rates, up to 200 cbm/hr. Large capacity and quiet gentle handling enable NERAK bucket elevators to be used equally for delicate foodstuffs and coarse, abrasive materials.

The JOEST Zig Zag Air Separator is a high-performance cascade separator for the separation of light and heavy fractions from dry, free-flowing bulk materials. It is based on the principle of multi-pass cross-flow separation, in which air is introduced from below into a zig-zag shaped channel. This allows light particles to be carried upward, while heavier components fall downward. Air routing can be configured as recirculation, partial recirculation, or suction mode. JOEST offers standard models, patented hybrid versions for fine particles, laboratory configurations, and custom solutions – ideal for applications in the recycling or food industries. The modular design enables tailored adjustments to various separation tasks.

WEICON Zinc Spray is approved by the German TÜV and provides a long-lasting cathodic corrosion protection to all metal surfaces. The spray forms a fast-drying, adherent protective layer of microfine zinc flakes. In the salt spray test according to DIN EN ISO 9227, metal parts coated with WEICON Zinc Spray did not show any signs of corrosion after more than 1050 hours. The zinc flakes form a resistant protective layer, even under extreme weather and environmental conditions. Zinc Spray thus fulfils higher requirements than those defined by the DIN EN ISO 1461 standard. WEICON Zinc Spray can be used as a high-grade anti-rust primer, for the coating of welded joints and drilled holes, as a conductive intermediate layer for spot welding and wherever metal must be protected against corrosion

WEICON Zinc Spray bright grade is TÜV-tested, provides all metal surfaces with a long-lasting cathodic corrosion protection and has a light coulour shade which matches fresh hot-dip galvanized coatings. The spray forms a fast-drying, adherent protective layer of microfine zinc flakes. The zinc flakes form a resistant protective layer, even under extreme weather and environmental conditions. In the salt spray test according to DIN EN ISO 9227, metal parts coated with WEICON Zinc Spray did not show any signs of corrosion after more than 550 hours. Zinc Spray „bright grade“ can be used for the coating of welded joints and drilled holes, as a conductive intermediate layer for spot welding and everywhere where metal must be protected against corrosion.

Mobile power for tough tasks The ZR mobil-e represents a revolutionary machine concept in mobile shredding. It utilises the many advantages of the electromechanical drive without having to forego the benefits of a mobile machine. This guarantees you maximum economic efficiency and flexibility. Advantages of the ZR mobil-e The mobile version of ZR, namely the ZR24000 mobil-e, is used for the coarse processing (90 % < 300 mm) of household waste, bulky waste, commercial and industrial waste, waste wood, mattresses, carpets, mixed construction waste, railway sleepers, baled goods and rolled goods. The aim of shredding is to reduce the volume, to produce RDF and to break down the material for downstream processing steps. Areas of application for this type of cutting system include cement plants, recycling, sorting and waste disposal companies, plant manufacturers, RDF power plant operators, operators of waste incineration plants and biomass power plants. With the ZR class, we have developed the most economical 2-shaft shredder with the lowest life-cycle costing (LCC) in its class. As a mobile version, it also offers maximum flexibility. TOUGH performer, SMART saver The robust and resilient machine construction of the ZR class is designed for multi-shift continuous operation. The quick-change table system and the simple design guarantee high plant availability. The powerful, slow-running and ripping cutting system is enormously resistant to impurities and ensures perfect material preparation for sorting plants. This machine class is therefore perfectly configured for volume reduction or the production of substitute fuels. The use of future-oriented technology results in extremely low life-cycle costs for the operator. This makes the ZR a reliable power pack that makes economic sense: TOUGH performer, SMART saver.

Tough performer, smart saver. With the ZR class, we have developed the most economical 2-shaft shredder with the lowest life-cycle costing (LCC) in its class. Advantages of the ZR2400 The powerful primary shredder with the energy-efficient UNTHA Eco Power Drive system delivers high throughputs and particularly excels when processing difficult-to-shred waste and recyclable materials. The machine’s robust and resilient construction is designed for multi-shift continuous operation. The quick-change table system and the simple design guarantee high plant availability. The powerful, slow-running and ripping cutting system is enormously resistant to impurities and ensures perfect material preparation for sorting plants. This machine class is therefore perfectly configured for volume reduction or the production of alternative fuels. The ZR class comes with two different cutting systems for varied material handling. The stationary ZR is designed for coarse shredding of different materials and is exceptionally economical in tough continuous operation. The use of future-oriented technology results in extremely low life-cycle costs for the operator. This makes the ZR a reliable powerhouse of a shredder that makes great economic sense: TOUGH performer, SMART saver.

Bauteile für Reißleinen-System Reißleinen werden als Stellglieder für die Betätigung von Seilzugnotschaltern entlang von Förderbandanlagen eingesetzt. Die Reißleine und das für die Installation erforderliche Zubehör sind unter Berücksichtigung normativer Anforderungen funktional auf die Seilzugnotschalter abgestimmt. Wir führen daher ständig: Reißleine, Stahlseil, 3mm oder 5mm Rot-PVC-Ummantelt Spannfedern verschiedene Ausführungen Ankerhaken M10 Ankerhaken M12 Ankerhaken M8 Spannschloss M6; 2 Ösen Spannschloss M6; 1 Haken/1 Öse Kettennotglied 6 Augenschraube M12x60* Augenschraube M12x200* Augenschraube M12x60* Klemme Bügel-, Gr. 3-5 Klemme Eiform-, Gr. 3 Klemme Eiform-, Gr. 5 Kausche Gr. 3 Kausche Gr. 5 Markierungsschild für Reißleine Umlenkrolle M10x60, Rolle Und vieles mehr

The μ-ICC 2.45 compact is currently the only compact device of its kind for determining density and is supplied by proMtec. Inline concentration control calculates the concentration, the density, proportion of dry matter or the water content of aqueous products directly in the process itself. The product can be present as a liquid, paste or suspension. The instrument is attached directly where the measurement is taken so it is a perfect complete solution for individual measurement locations. Despite its compact design, all the electronic hardware components are contained within the casing. This allows proMtec to provide you with an individually customised and extremely low cost solution. Moreover, proMtec offers a wide range of sensor specifications and can therefore find the best solution for your specific needs. Microwave transmission measurement has many advantages: • measurements are contact-free and the instrument requires no maintenance • it is suitable both for use with pipes and directly in containers • the readings are representative because it evaluates the cross-section of the product flow • precision is comparable with laboratory analysis • independently of dirt or deposits