The round vibro screen JEL VibRS can screen up to six fractions and is used for almost any bulk solid or screening task. Thanks to screen decks which can be stacked on top of each other, even large screening surfaces can be set up in a way that saves space. Furthermore, the output and the number of separated fractions can be increased by setting up additional screen inserts – it only takes a few simple steps, and the footprint stays the same.

Vibrating screens are set in motion by the imbalance of vibrating motors, causing them to move vertically and horizontally. And they do so with high amplitude. Vibrating screens are very versatile in their application. In conjunction with screen cloth cleaning systems, they are suitable for almost all common screening tasks, a wide range of products, and a broad grain spectrum. Advantages of our vibrating screening machines: - Can be used for a wide range of products - High throughput and separation accuracy even with difficult product properties - Suitable for all common screening tasks: separation of oversize or fine grain, protective screening, classification, and passing. - Short downtimes: quick screen insert change, very good cleanability (hygienic design) and easy maintenance. - Various sizes and screen areas available - Various cleaning systems for the screen mesh: triangles, balls, and ultrasound - Holistic screening concepts including upstream and downstream process technology such as conveying, dosing, mixing, etc.

SPALECK vibratory feeders guarantee maximum material flow. The design tailored to your needs and material-optimised surfaces enable gentle and targeted conveying and dosing of your bulk material. With our range of unbalanced vibratory conveyors, magnetic vibratory conveyors, resonance conveyors and dosing feeders, we adapt your machine individually to your material to be conveyed, the possible installation dimensions and the throughput rate. The feed and distribution of your material is thus optimised.

The DE-DDW-VF60 is a compact, high-quality dosing system for the precise gravimetric dosing of free-flowing bulk materials in the low to medium throughput range. The system combines a vibration-optimized discharge chute with a near-resonance, energy-efficient drive for consistent material flow during operation. Weight measurement is performed via a strain gauge load cell, enabling highly accurate and reproducible dosing. Thanks to its robust construction and industrial-grade materials, the VF60 is ideally suited for production environments with high demands on process stability, measurement accuracy, and easy integration into existing systems.

VIBREX® Conveyor-belt scraper for keeping conveyor-belt systems clean. These are the ideal elements for belt cleaning. Individuall spring-mounted, wear-resistant scrapers are pressed flexibly against the conveyor-belt. They continually adapt to the belt surface and to wear. This results in a very long life and long-term effective cleaning. In addition, the surface of the conveyor-belt is extremely well protected. Conveyor-belts mostly wear out because of bad scrapers. Product features: For extremely dirty belts and high-performance, the VIBREX®-DUAL scraper system's combination of front and main scrapers produces the best effect. Spring blades and head scrapers are used for reverse belts, severe material caking and narrow spaces. Assembly and tension devices of simple clamping attachments for axles made of aluminium, steel and stainless steel to pneumatic vertical and torsion tension systems ensure fast assembly, good adjustability and simple maintenance. Polyurethane brushes, plough scrapers and a range of scraper variations enhance the tried-and-tested VIBREX® programme. VIBREX® scrapers are reasonably priced and effective. They are important elements of equipment for both plant manufacturers and operators. Areas of application: Conveyor-belts in lignite and hard coal mining, power plants, cement works, gravel, stone and sand pits, foundries, aluminium works, lead and steel works, harbour warehouse operations, chemical works, water and sewage plants, refuse incineration plants and in the wood and metal processing industries.

ViDos - This solution is based on the established valve series Z 600. Body, disc and liner are standard elements of the EBRO Product Program. A vibrator mounted on the lower shaft makes this valve special, as it causes a linear vibration which swings the disc horizontally. The frequency of this vibration is controlled via air pressure. Application: Reduction of crustification and adherence When used as a shutt-off valve, the vibration function helps to reduce the crustification of particles within the product. This leads to significant extension of the Cleaning- and Service periods. When the valve remains in the closed position for a long time, adherence of the conveyed product is a consequence. Disc and liner are subjected to high frictional forces when opening the valve.If the vibrator is switched on before opening, crustification of the product will be dispensed. Fine Discharging / Dosing When equipped with a positioner, different positions for fine and rough dosing are possible. Having reached the dosing position, the vibrator will be set into operation, thus keeping the product in motion. So the “Bridging effect“ is prevented. The product can be conveyed very sensitively even with minor opening angles.

Keeping your processes moving - individual conveyor chain systems

Vision.Insights transforms blind waste streams into controlled, optimized processes – through real-time analytics for increased throughput, quality, and availability. The AI-based sensor module with deep-learning object recognition is easily installed above the conveyor belt and detects materials with granular precision in real time. Interactive dashboards provide live monitoring of material flows, alerts for malfunctions or hazards, and data-driven analyses for process optimization and quality assurance. Benefits: Intelligent plant control, precise reports, and the foundation for new sorting applications – all seamlessly integrated.

Vision.Sort brings AI-powered vision intelligence with RGB cameras to waste sorting – smarter, more cost-effective, and full of potential. The system captures the waste stream in real time, recognizes virtually every object with granular precision thanks to AI deep learning, and sorts it precisely using compressed air or other sorting methods – flexibly for almost any desired fraction. From packaging and paper to commercial waste and electronic scrap. It minimizes manual labor, maximizes purity, and creates new value streams from what would otherwise be considered waste. Your benefits: cost savings, top recycling quality, and the freedom to sort virtually anything with AI in a customized way.

VSR BLASTER® Air cannons and air injectors for pneumatic removal of blockages and deposit build-up in silos. Air cannons are fixed to the outside of the silos. They blast the stored compressed air at 4 to 10 bar over a wide cross-section of 50 to 150 mm in diameter in a few milliseconds into the critical interior material zones. Very often, special jet nozzles, such as the isobaric sword nozzle, for example, are used for activating wide areas. The total operating safety and maintainability of well over 25,000 VSR BLASTER® air cannons are put to the test daily. They are also easy to assemble and to control. Air cannons can be components of a cost-effective system of discharge-safe new machines or be effectively adapted to work with existing systems. VSR BLASTER® air cannons are supplied with full assembly and control accessories and can be assembled on request. Areas of application for VSR BLASTER® air cannons: Ratholing and bridging in funnels, silos, bunkers, stockpiles and hoppers with a volume of up to well over 10,000 m³. Similarly, deposits built up in pipelines, heat exchangers and cyclones are removed, even in the high-temperature areas of power stations and cement works with media temperatures of up to well over 1,000 °C. In this area, the VSR changeable nozzle system offers large cost savings through simple jet nozzle exchange. Areas of application for the VSR BLASTER® air injector: Free-blowing of funnels, pipes and filters Shock aerating of bulk goods and soil Air-blowing moulds and tools Cleaning probes and heat exchangers Delivery program: VSR BLASTER® air cannons are available in sizes from 12 to 500 l content and blasting cross-sections of DN 50, DN 100 and DN 150. VSR BLASTER® air injectors are available in sizes of 2, 5 and 8 l content.

WEICON W 44 T® is a multifunctional product which, thanks to its special formula and outstanding creeping capacity, combines corrosion protection, water displacement, lubrication, conservation and cleaning in a single product. WEICON W 44 T® loosens seized threads, bolts, fittings and valves, penetrates and dissolves rust, dispels moisture from electrical contacts, prevents tracking currents and makes it easier to start wet motors. It eliminates squeaky and creaky noises on hinges, guides, bearings and all types of joints and couplings. It cleans soiled metal surfaces and leaves a long-lasting razorthin film which doesn‘t smear or stick and does not attract dust. It protects and preserves all types of tools, machines...

Today, we use our many years of expertise in the screening sector to prepare even complicated and contaminated powders for you. In our laboratory in Radevormwald, we can treat any powder materials safely, precisely and contamination-free.

WAGENER Vulcanizers GmbH & Co. KG has been an expert in vulcanizing technology since 1897. Based near Düsseldorf, we have a unique wealth of experience and specialize in the design, development and construction of transportable and stationary vulcanizing presses. Our vulcanizing presses are used for the splicing and repairing of conveyor belts as well as for cables and hand rails. With our customer-specific solutions "Made in Germany" we rely on the highest quality and satisfaction of our customers.

INNOVATIVE DUST FILTRATION TECHNOLOGY FOR A CLEAN, SAFE & HEALTHY ENVIRONMENT WAMAIR Spot polyTUBE™ is a specialised compact dust collector for handling and process machine. Its stainless-steel housing contains vertically mounted polyTUBE™ filter elements. polyTUBE™ filtration technology ensures high filtration efficiency thanks to nano-fibre media and an open-profile tubular cell structure for reduced dust residue and high performance over time. The dust separated from the air flow by special filter elements drops back into the process after an automatic pulse mechanical cleaning system has removed it: this innovative system is electrically activated, provided with isolator equipment and installed on an energy distribution plate to get the maximum efficiency. polyTUBE™ technology offers maximum filtration performance with minimum energy consumption.

TA-Luft 2021 imposes new emission reduction requirements on businesses. Textile warehouses and self-supporting canopies offer a flexible way to effectively enclose transshipment points, building material storage areas, and bulk material storage areas, thereby sustainably reducing dust emissions. AGROTEL round arch halls on concrete blocks as box roofing TA-Luft 2021: New requirements for warehouses in concrete plants, recycling, and waste management With the amendment of TA-Luft 2021, the requirements for emission and immission reduction have been redefined. In addition to concrete and asphalt mixing plants, recycling companies, waste management companies, and operators of recycling halls and open building material storage facilities are particularly affected. Wherever bulk materials are stored or handled, the requirements for effective enclosure are increasing significantly. Textile saddle roof hall from AGROTEL on concrete blocks Enclosure requirement for transshipment sites: focus on warehouses, roofing, and wind protection TA-Luft requires “complete or largely complete enclosure” for transshipment sites of materials that can lead to dust emissions. This includes closed warehouses, large-area roofing, halls with gates or strip curtains, and enclosed drop-off and transshipment areas (see TA-Luft 2021). In addition, wind protection is required for outdoor loading and unloading operations. At AGROTEL, we know that a well-designed storage canopy not only effectively reduces dust emissions, but also creates structured storage areas and facilitates management.