Weighing electronics for strain gauges and digital load cells The electronics of the DE-CONscale detects the measurement signal from up to 4 strain gauge load cells or digital load cells, generates highly accurate weight values by means of parameterizable hardware and software filters and is ideally suited for operation with almost any PLC system. Highlights • Connection of max. 4 strain gauge load cells in 4-/6-wire technology • Connection of digital weighing platform or precision scales via serial interface • Resolution of the input signal 24 bit (8,000,000 parts) • Adjustable sensitivity 2mV/V and 4mV/V • Detection speed 5ms • Parameterizable hardware and software filters • Numerous interface protocols can be selected and configured on board and via web server • Interfaces: Ethernet, RS232, RS422, RS485, USB • Available as a DIN rail device for control boxes or as a decentralized solution in a stainless steel housing DE-CONloadcell ============= Add-on module for extending a controller of the DE-CON family with additional strain gauge weighing signals • Integration of up to 4 independent weighing signals • Perfect for the weight indication of containers, silos, emptying stations, pre-containers, etc. • Control system coordinates and monitors the bus operation to the DE-CONloadcell

Calibratable weighing module with elastomer bearing and base plate The loadblock B10-MB was specially developed for B10N and B10S bending beam load cells. Due to the introduction of the force with an elastomer, the optimal introduction of the load is guaranteed. The base and bottom plate is made of stainless steel. The elastomer bearing provides compensation for misalignments, shock loads and light vibrations. At the same time, it is self-centring via elastomer restoring forces. Optionally, B10N load cells, made of non-corrosive steel or the BS10 made of alloyed steel, can be mounted. Weighing of small and medium containers, mixers and tanks. For dispensing and bagging scales as well as packaging machines in the process industry. Features Ideal for hopper or tank weighing applications Material: Stainless steel or alloyed steel Nominal load: 5 kg - 250 kg Load cell hermetically sealed Particularly robust for long-term use in industrial applications Easy installation Low construction height Limited tilt protection Scope of delivery 1 x load cell 1 x base plate with overflow plug 1 x elastomer with electro-galvanised steel insert 1 x head plate with 2 countersunk screws 2 x M8 screws Grounding strap

The D15S-MS is a weighing module for constructing container, tank and silo scales. The system consists of a stainless steel load cell, a load introduction and a floor console. The load cell modules only need to be connected to a scale display of your choice using the terminal boxes provided. If required, the container scale can be pre-calibrated at the factory (please order calibration separately) and is then ready for use immediately after installation. The weighing modules are installed directly between the foundation and the container base.

Calibratable weighing module made of stainless steel, with base plate and rubber-metal bearing force receptor The K30-ME mounting kit was specially developed for the shear beam load cells of the K30 series. A rubber-metal bearing, which compensates for the lateral forces and at the same time positions the load carrier, ensures optimal force reception. The base and bottom plate is made of galvanised steel. Optionally, K30N load cells, made of non-corrosive steel or the K30S, made of alloyed steel, can be installed. Weighing of small and medium containers, mixers and tanks. Dispensing and bagging scales, packaging machine weighing in the process industry. Features Ideal for hopper or tank weighing applications Material: Galvanised load module; load cell optionally made of K30N stainless steel or K30S alloyed steel Nominal load: 500 kg - 1000 kg Load cell hermetically sealed Rubber-metal bearing for compensation of misalignments, shock loads and slight vibrations Elastomer bearings with self-centring restoring forces Particularly robust for long-term use in industrial applications Easy to mount due to mounting flange Low construction height Limited tilt protection Scope of delivery 1 x load cell 1 x torsion-resistant base plate 1 x rubber-metal bearing 1 x head plate 1 x fixed grounding strap

The stainless steel weighing module enables the simple and problem-free integration of the laser-welded K30N load cells. A particular advantage of this module is the central load introduction, which takes place via two hardened ball sockets and a ball. Even with parasitic forces such as wind loads on silos or lateral forces on containers, the exact load introduction is guaranteed - for always precise measurement results.

The VC 3500 and LCM 460 are heavy-duty modules for weighing silos, hoppers, tanks and mixers. The special construction of the modules permits installation directly between the foundation or substructure and hopper support. The module ensures the optimal force transmission and a very high lift-off and lateral load safety - normally without additional transverse link and captivation mechanics. For nominal loads from 2 up to 200 t. Use: - Fill level and inventory control - For mixer and hopper with agitator - For bunker, also with discharge bottom - Particularly for installations in outdoor areas - For precise silo weighing Benefits: 1. Measuring accuracy - Both modules are equipped with high-precision double shear beam load cells made of stainless steel. The LCM 460 even has an OIML R60 approval C3 for nominal loads up to 20 t. The construction of the module provides optimum force transmission into the load cell, thus ensuring reliable and exact weighing results. 2. Safety - The special construction of the modules protects the load cell from high lift-off and transverse loads, thus ensuring the installation of the weighing module directly between foundation and tank support. No additional transverse and captivation mechanics is required. Slight tilting can also be compensated. 3. Protection - Locking screws in the upper section of the module protect the load cell from such shock loads as may occur upon installation of the silo. An additional ground strape serves as overvoltage protection. 4. Easy replacement of load cell - The load cell is installed in the module in such a way that the load cell can be replaced also without removing the module. MTS offers numerous load cells and modules for silo and hopper weighing. Load cells and modules are selected according to the design, size and construction of the containers, the installation and environmental conditions and the required accuracy.

Weighing screw conveyor with automatic calibration. Weighing screw conveyor perform a dual function – they transport the bulk material from A to B and measure the throughput (t / h) and the absolute quantity delivered (t) simultaneously. Especially for fine and dusty products, such as white lime, hydrated lime, cement and starch a weighing screw conveyor provides the advantage of dust-free conveying. Due to the dual function (conveying and weighing) this results in an economical solution compared to conventional weight feeders and solids flow - measuring instruments. Requirements for the use of weighing screw conveyors: 1. To ensure optimum transport of the bulk material in conjunction with a precise weighing, the inlet- and the outlet connection must be fully decoupled. The input feed should be controlled via a rotary valve or a second screw conveyor. 2. The screw should only be filled to maximum 40% of the conveying capacity -otherwise a part of the conveyed product is thrown over and double-weighted. 3. Evt. Caking in the conveyor tube or on the screw flights should be zeroed periodically. Especially the third point can often not be realized in practice. Screw conveyor often dose additives (eg. hydrated lime in the flue gas desulfurization) and are in operation 24 hours arround the clock. In order to still be able to use the serious advantages of weighing screw conveyor, Hense Wägetechnik has developed a concept for automatic "self-calibration" in continuous operation. Functionality: The weighing screw is feed via a small hopper with a rotary valve in the discharge. The hopper is mounted on 4 precise "Clevermount" - weighing modules. The static hopper weighing system and the “weighted screw conveyor are connected to the same evaluation electronic. The “self calibration cycle” can be started periodically (over a programmable time) or externally from the PLS system. In the first step the hopper is filled to an adjustable weight. This value can be preselected in the evaluation electronic. The weighing electronics transmits a signal "start calibration cycle" to the parent PLS system. The filling of the hopper is stopped during the calibration. After a short settling time, the electronics stores the container weight (kg) and the state of the totalizer (kg). The electronic system now “waits” until the weight of the product in the hopper is reduced by an adjustable value (eg. 100 kg). Now the electronics compares the reference quantity (eg. 100 kg) withdrawn from the hopper to the counter of the weighing screw - on exceeding a defined fault tolerance, the system performs an automatic correction calibration. Furthermore, all data is logged in a log table and optionally set a tolerance alarm.

The weighing terminal for filling and mixing applications The Bosche PMW process weighing terminal handles simple and complex filling and mixing applications. It offers standard and individual programs for filling processes that can be configured as required. It is ideal for silo weighing, container weighing, dosing devices and mixer weighing. With the PMW, filling and mixing applications for up to 14 components can be quickly configured - without complex and costly programming. You can choose between five operating modes: BASE, LOAD, UNLOAD, 03 PRODUCTS and 06 PRODUCTS. This weighing transmitter enables the monitoring of various production processes with the industry standards of bus technology and is a cost-effective alternative to comparable electronics from PLC manufacturers. Features of the weighing terminal EC type approval - Calibration capable according to OIML R76:2006 Accuracy class III and IIII Max. 10,000e or multi-range 3x10,000e @ 0.2 µV/d in calibrated CE-M version for legal metrology Control cabinet installation Selectable analog output for current or voltage, optically isolated, 16 bit (selectable 0-20mA, 4-20mA, 0-10V, 0- 5V, ±10V, ±5V) Wide input voltage range: 12 - 24V DC +/- 10%, +/- 10% Number of parallel load cells: max. 8 (at 350 Ohm) or 16 (at 700 Ohm) High measuring rate of the measuring transducer up to 300 measurements / sec. Fast A/D converter: 24 bit (16,000,000 parts) 4,800 Hz Six-digit 7-segment LED display (height 14 mm) with 8 status LEDs Maximum number of decimal places: 4 Programmable switching contacts 3 programmable potential-free outputs: max. 115V AC / 60mA for controlling relays Two digital, optically isolated inputs Standard interfaces: RS-485 + RS-232 All connections via screw terminalsAs an option, we offer the industrial measuring amplifier with PLC interfaces and field buses: Profibus DP, DeviceNet, CANopen, Profinet IO, Modbus/TCP, Ethernet/IP. Ethernet TCP/IP.

- Weigh-belt feeder for normal to well flowing ingredients - Stable dust-tight design for harsh industrial conditions - Removable doors for quick cleaning - Usable as a continuous or batch-wise metering belt feeder or for throughput metering (operating mode can be changed on the controller)

WeKea modular conveyor: Westeria has revolutionised the procurement process of conveyors: WeKea is a modular series of conveyors with an online configurator that gives you an official quote within minutes. The design of the conveyors allows shipments in less than six weeks and use much less freight space. All this, without compromising our commitment to quality.

We weld elevator buckets and accessories for chain conveyors and chain systems in various designs, reliably, precisely and durable

Recycling centers are the hub for disposal and recycling. They play a central role in the collection, correct disposal and reuse of all types of waste. Their importance for the circular economy as well as climate and resource protection continues to grow. Recycling centers and recycling yards have developed in recent years from small "yards" into modern recycling centers with the appropriate infrastructure and logistics. This makes planning and implementing halls and roofs for municipalities, municipal waste disposal companies and waste management facilities an exciting task for us. The increasing environmental awareness in society and the trend towards recycling are placing ever higher demands on the logistics and infrastructure of recycling centers. The operators must also comply with a large number of requirements and legal regulations. We design our halls for recycling centers and recycling yards accordingly. When planning halls, we ensure that waste can be separated and recycled as best as possible. Recycling centers make a contribution to environmental protection. In order to recycle and reuse in the spirit of the circular economy, recycling centers need more and more storage space for a wide variety of recyclables and materials. Many of these require a hall or at least a roof. This begins with the acceptance and applies above all to the temporary storage of recyclable materials and objects. A roof or hall is necessary depending on the type of waste, e.g. for paper and cardboard, old clothes or even for old electrical and electronic devices. This is the only way to ensure optimal return to the economic cycle.

The WeSort.Cloud is your central cockpit for the sorting plant – with real-time status, component monitoring, and complete sensor transparency. It displays detailed operating statistics: composition of waste streams, detected objects, plant runtimes, and throughput data – all live on a clear dashboard for plant technicians. Predictive maintenance detects failures in advance, minimizes downtime, and ensures maximum availability. In the future, even custom AI models can be trained to sort independently and tailored to specific applications. Benefits: Full process control, fewer breakdowns, and flexible adaptation – for efficient and future-proof waste management.

The wet separator is suitable for picking up challenging particles which are sticky, hazardous to health, highly combustible, reactive or even explosive. It is the best solution to collect metal dusts and powders made of aluminum, magnesium and titanium. Collecting the particles, the wet separator clears the air stream by bonding the particles with a liquid in the dust container. Here, the dust-laden air stream flows through the liquid and creates turbulence for the wet separation. Bonded particles sediments to the bottom of the dust container while the remaining particles of the air stream are filtered by a dust class H classified filter.

The Wetdust dust conditioner is the ideal machine for evacuating, conditioning and disposal of industrial dust.