Working range 4 - 28 mm Ø Hook blade Large handle diameter for optimum haptics. Progressive regulation and easy to operate adjusting screw. Precise, quick and safe stripping. Quick change of the inner blade with a bayonet fitting.

Test Text EN

CALIBRO is the compact version of the ICON powder weighing system, specifically developed for applications where manual loading is preferred, but high dosing precision and batch repeatability remain essential. Overall, the use of a small-batch solution can contribute to quality improvement both in production and in laboratory environments. High weighing accuracy, combined with consistent reproducibility, aligns with ever-increasing quality requirements. The hardware and software solutions integrated with the systems ensure traceability and support sustainable production conditions.

Capacitive sensors for level monitoring of liquids and all types of bulk solids. Special versions for applications in the field of chemistry, food, explosion protection, agriculture. Capacitive rod probes for all bulk solids with binary and analog output signal and patented compensation of the dielectric constant.

The Capanivo® level limit switch can be used in many solids as a full, demand or empty detector. The robust, glass reinforced PPS (Polyphenylene Sulfide) sensor is even suitable for food applications whilst also resistant to many forms of aggressive material. The Capanivo® can be used in storage and process vessels, or in pipes, as a limit switch and spillage detector. The electrodes in the sensor make up a condensator. As the level of the material changes, the capacitance changes as well. The integrated electronics evaluate the change in capacity and convert it to a switching signal. The Capanivo® has approvals for hazardous Locations (Dust Ex) and is therefore suitable for use in most industries as a limit switch. • Price competitive level control device. • Simple installation and set up, no calibration required. • Maintenance free, corrosion resistant, suitable for a wide range of applications. • Reliable and easy to operate measurement principle. • Plastic or die-cast aluminium electronics housing. • Protection class IP 66. • Certification for use in dust-Ex Areas. • High sensitivity from a DK range of 1.6.

The capacitive level detector Capanivo® 8100 is used in storage and process vessels as a full, demand and empty detector in all liquids. Due to different probe versions, a suitable solution will be found for every installation setting. A robust construction allows service at process temperatures up to +125 °C and a process overpressure up to 25 bar. Your benefit: - Simple commissioning without adjustment to the medium - Adjustable hysteresis avoids unnecessary switching and thus increases the service life of the system - Reliable measurement results even with strongly adhering material

Carrying frame The carrying frame prevents belt misalignment and guarantees protection of the belt edges. As the carrying frames only function efficiently when the drum casing is clean, they are equipped and delivered with dirt-repellent 60° shore soft rubber. Our carrying frames can be used with both normal and reversing conveyor belts. Mode of operation: When the conveyor belt is running straight, the axle through the roller casing forms an angle of 90° to the direction of movement of the belt. When the belt drifts, the roller casing moves, due to the dead weight of the belt, so that a forward motion occurs which brings the belt back to its normal position. The roller casing returns to its normal position as soon as the corrective procedure is completed. The mechanics of the movement are rendered possible due to a complex ball joint in the centre of the roller as well as the position of the axle in relation to the conveyor belt being less than 90°.

Our steel and HDPE conveyor rollers are designed for light to heavy-duty conveying applications and offer reliable performance in bulk and unit load processes. Thanks to their robust construction and high-quality materials, they boast a long service life and low maintenance requirements. The rollers are also available with gears or in a tapered design upon request – ideal for special conveying lines or curved sections. Furthermore, we offer small order quantities, ensuring that even customized projects remain economically viable.

The INFA-MINI-JET familiy is a versatile circular filter program. Customer-specific designs are available due to individual constructions. Because of an optional hot gas design, pressure resistance and gas-tightness, the fully automated cartridge filters ensure the separation of dust and powder products as well from exhaust air as from process gases. During the filtration phase the cleaning of the filter cartridges is done in periodic intervals by pulses of compressed air (jet-pulse cleaning). The cartridge filter sizes cover a volume flow of 20 m³/h to 12,000 m³/h.

The cartridge filter INFA-MICRON MPR was especially developed for dust which are high potentially dangerous and also are filtration-technically demanding. Its horizontally inserted filter cartridges are cleaned by a jet pulse system, supported by a special injector and upper area regeneration of the cartridge (offline). This method allows the separation also with adhesive or sticking dusts, because the jet pulse cleaning brings in higher cleaning energy into the filter cartridges than the backflush system of cassette filters. In addition, the filter cartridges can be precoated or operated with a continuous additive supply. The cleanability is thereby preserved on a long-term. The MPR cartridge filter is a user-friendly and high efficient dedusting unit. Efficiency of this filter series covers a wide range of filtration duties in pharmaceutical, chemical, metallurgical and nuclear-technical industry. The processes in these industrial branches are very demanding on dust separation efficiency. Infastaub offers suitable handling systems according to requirements of contamination protection. Like the cassette filter MKR the maintenance staff can carry out the dust disposal and the change of filter media free of contamination (up to OEB 4 | 1-10 µg/m³) with the help of the "Safe-Change" system.

The cassette filter system INFA-MICRON MKR is available as cleanable dust collector with one or two filter stages as well as non-cleanable, downstream safety filter. The filter sizes cover air volume ranges of > 500 m³/h. Big volume flows can be cleaned by parallel arrangement of several units. The 2-stage design guarantees residual dust contents as low as 0.001 mg/m³. Filter cassettes of class H13 are used as filter media for the cleanable 1st stage and H13 to U15 for the non-cleanable 2nd stage

The cast iron slide valve Type GFS is used in silo and tank outlets. It guarantees optimum sealing when storing bulk materials containing dust or in granulate form. Mode of operation: The stainless steel slider plate on eccentric support pins in the cast iron case is sealed dust-tight on the bulk material side with Vulkollan sealing strips and with packing glands on the outside. Easy adjustment of the support pins and the packing glands achieves high operational reliability. The cast slide valve is available with pneumatic cylinder, toothed rack or manual operation. Material / design: Case: grey cast iron Bracket: galvanised steel Slider plate: stainless steel Sealing strips: Vulkollan Technical data: Pneumatic drive: P neumatic cylinder with non-contacting limit switches and 5/2 way solenoid valve Electric motor toothed rack drive: with integrated limit switches. 0.37 kW/400 V, 50 Hz Advantages: Robust and reliable Short closing times Easy to maintain Dust-tight

The JOEST Casting Cooler is an energy-efficient conveying system for the controlled cooling of castings. It is based on a mass-compensated resonance trough with an eccentric shaft drive – without micro-throw motion – enabling uniform, low-noise material transportation with minimal foundation loads. Typically installed between the shakeout and sorting conveyors, the system stands out due to its modular design, robust steel construction, and ease of maintenance. Honeycomb-type dampers and optimized springs ensure stable operation under high loads – with low energy consumption and easy installation. An integrated counterflow heat exchanger ensures high thermal efficiency. Optional air humidification is available to increase cooling performance.

CCS-3000 - Designed for Coke, Coal & Sinter and darker products that can be difficult to read with competing near-infrared sensors. Installed directly on the production line, this unit provides instant, continuous data displayed on a laptop or connected to a PLC.

Cellular wheel sluices are used to dosage, feed or take out grained or powdery materials or granulates. SCHRAGE cellular wheel sluices are solid welded steel constructions with yoke or shaft-mounted motors, sealed by adjustable all-round glands with oil ring. The rotor comes with 10 or 12 pockets as well as sealing strips or wipers. The hardwearing SCHRAGE cellular wheel sluices are equipped with rotation monitoring by means of capstan housing and proximity switch as well as an inspection opening. Flange pattern bores are drilled according to SCHRAGE factory standard or customer specifications. SCHRAGE cellular wheel sluices are available in nearly all materials and offer inlet/outlet widths from NW 150x150 to NW 1000x1000 as well as round inlet and outlet profiles. Special designs such as timing sluices via gate construction are available.