There's a reason our CUSTOM line is called what it's called. Or to put it another way, we offer solutions that are as unique as your bulk material. Because bulk materials are not all the same - but that’s exactly what we love at Schrage – tackling challenges. Regardless of whether you’re working with sludgy, sticky, hot, cold, toxic, or edible materials, you can rest assured knowing that we’ll come up with the perfect solution for your needs. And in the rare cases when our conventional conveyors fall short of the mark, our CUSTOM line will pick up the slack to deliver the solution you need. We’ll analyze your bulk materials at our technical center and determine how your product handling needs can best be met with our equipment. The enclosed design behind our tubular drag chain conveyors is dustproof and can also be gas-tight or watertight if needed. It doesn’t matter if your material is highly abrasive, toxic, sticky, or chemically aggressive: You can rest assured knowing it will be conveyed almost without any odor. And if necessary, you can get an ATEX-compliant system!

Crossovers for individual solutions based on DIN EN ISO 14122 and BGI 637 Application: e.g. to be used as mobile or stationary working area or as a crossover to pass an obstacle for example a conveyor belt Standard step width: 600 - 800 - 1000 mm Standard step depth: 225 mm for an inclination of 45° and 175 mm for one with 60° Standard material of steps is aluminium corrugated, also available aluminium grated and perforated Standard platform length 700 mm, can be extended in length and width if requested Stairs with an inclination of 45° are equipped with an additional knee rail Optional accessories for crossovers: Marked step edges Safety barrier Safety chain Swing door Removable tool-tray Pluggable railingr Protecting sheet underneath steps Anti-slip handrail

Customised-solutions for mobile working platforms Stationary working platform for individual solutions based on DIN EN ISO 14122 and BGI 637 Application: e.g. to be used as maintenance and assembly platform Standard step width: 600 - 800 - 1000 mm Standard step depth: 225 mm for an inclination of 45° and 175 mm for one with 60° Standard material of steps is Aluminium corrugated, also available aluminium grated and perforated Optional accessories for mobile working platforms: Marked step edges Safety barrier Safety chain Swing door Removable tool-tray Pluggable railing Protecting sheet underneath steps Anti-slip handrail Central brake

Customised-solutions for stairs Aluminiun stairs for individual solutions based on DIN EN ISO 14122 and BGI 637 Deliverable with or without platform Standard step width: 600 - 800 - 1000 mm Standard step depth: 225 mm for an inclination of 45° and 175 mm for one with 60° Standard material of steps is Aluminium corrugated, also available aluminium grated and perforated Stairs with an inclination of 45° are equipped with an additional knee rail Recommended in accordance with EN ISO 14122: For safety reasons and based on DIN 14122-4 stairs with an inclination of 45° should be preferred. Stairs with an inclination of 60° should only be used if on-site circumstances do not permit otherwise Optional accessories for stairs: Safety barrier Pluggable railing Anti-slip handrail Safety chain Marked step Swing door Protecting sheet underneath steps Removable tool-tray

Customised-solutions for stationary working platforms Stationary working platform for individual solutions based on DIN EN ISO 14122 and BGI 637 Application: e.g. to be used as maintenance and assembly platform Standard step width: 600 - 800 - 1000 mm Standard step depth: 225 mm for an inclination of 45° and 175 mm for one with 60° Standard material of steps is Aluminium corrugated, also available aluminium grated and perforated Optional accessories for stationary working platforms: Marked step edges Safety barrier Safety chain Swing door Removable tool-tray Pluggable railing Central brake Protecting sheet underneath steps

Although this type of valve is used predominantly in the timber industry, it is also suitable for metering coarse grained and fibrous bulk materials. The bulk material must have good conveying and flow properties. Because both the rotors and housings are precision-finished to the narrowest tolerances, the cutting rotary valve made by Barl features the highest possible degree of sealing integrity. Adjustable end plates are as standard as the outside bearing. The cutting rotary valves made by Barl are characterised by their extremely robust construction. In spite of this, attention was paid at the design stage to make sure the product is cut only as much as necessary and as little as possible. The knives are hardened and the exchangeable rotor plates are made of wear proof material. The cutting rotary valves are naturally also available in both pressure-shock-proof and flame-propagation-proof design.

EBRO cycle-locks are installed where powdered media is discharged from silos, receiver tanks and bigbags and dosed in many cases. They are also used for feeding into downstream production processes, as well as for inertisation of products during transfer operations. The cycle-lock TS is available in nominal diameter DN 50 - DN 600. The geometry of the filling pipe depends on the specific properties of the products to be passed through the valve. The chamber volume can be adapted individually. The communication is based on conventional signaling equipment and can be integrated to existing control systems without any problems.

- made of bended wear plates and inside hard-faced pipes

Collect and analyze your manufacturing data With Datagate, you let your data work for you. We collect your production data from the plant and prepare it in simple dashboards. Complete transparency across your entire production - in real time When developing Datagate, we focused on not only collecting data, but also giving our customers the ability to read and understand that data. Our mission is to enable companies to make the most of their data and thus improve their production.

For contamination-free handling of powders and granulates DCS meet highest requirements in terms of: + Cross contamination & allergen control + Hygienic design + Energy efficiency + Flexibility Daxner Container Systems include: + Stainless steel IBC in hygienic design + Container loading systems + Container discharge systems + Container transport systems (AGV/ mechanical transport systems)

The DCS – Drum Containment System is a stainless steel cylindrical glove box with glass cover and with two glove ports. Highly economical in comparison with conventional isolation systems, the DCS ensures precise, contamination free evacuation of drums. Fully mobile, this space saving device has the flexibility to work with a multitude of different drum heights and diameters, in an inert atmosphere if required. Its Load Cell feature provides accurate charging, whilst the free moving suction lance connected to the PTS Powder Transfer System* and excellent visibility ensure residue free emptying. With safety always a priority, the DCS guarantees both primary and secondary containment, with a glove box enabling the operator to open the double liners within the sealed environment.

We have given the DE2 a new control system which includes voltage monitoring and speed sensing. This allows you to complete your bolting with even greater precision and reliability. As it reliably offsets any voltage fluctuations and changes in temperature, this new tool delivers superior torque accuracy. The DE2 switches automatically to the main available frequency (e.g. 50 Hz or 60Hz). The digital multifunction display (O)-LED allows the user outstanding ease of use and a comprehensive range of values. · The intuitive operating menu largely dispenses with text. · The two-digit torque setting 00-99 can be adjusted using the corresponding buttons. · The values measured for mains voltage, mains frequency and the motor temperature are indicated on the display. · Another option is to display the torque value (as listed in the enclosed torque table). · A host of additional features are available in the symbol navigation menu (e.g. key lock, loosening mode and locking of individual setting steps).

Application area: The decompaction box is mainly installed in silo cones. It prevents bridge formation and promotes the flowing out of the product. The application area is primarily fine powder bulk materials. Material: Polyester • ST 37 Design: The unit consists of diverse decompaction nozzles which are arranged in a specific way depending on the specified conditions. Every decompaction installation is connected to a ring line and can easily be divided into various ventilation fields. Electrical equipment: A 2/2 way solenoid valve with the required protection type and voltage is used as ventilation valve. Operating data: Ventilation pressure: 2000 - 8000 mm WS Air flow rates: 0.45 Nm3/min. per decompaction box Temperature stability: max. 140 °C Special features: Using the decompaction box, emptying of the ventilated silo without residues can normally be guaranteed. Low wear - no protruding parts in silo cone Easy installation without entry into the silo and subsequent installation is possible.

Application area: The MAHR decompaction nozzle is mainly used in smaller containers for fluidisation of powdery bulk materials. Bulk materials such as cement only need little fluidisation air so that the nozzles in this case are also intended for larger silos. Material: Case: grey cast iron Lining: Aeropertex fabric or sintered metal. Design: A complete fluidisation system consists of several decompaction nozzles which are arranged in a specific way depending on the specified conditions. Every decompaction installation is connected to a ring line and can easily be divided into various ventilation fields. Electrical equipment: A 2/2 way solenoid valve with the required protection type and voltage is used as ventilation valve. Operating data: Ventilation pressure: 2000-8000 mm WS Air flow rates: 0.01 Nm3/ min per nozzle Temperature stability: max. 140 °C.