LINEX® Conveyor-belt centralizing idler for the directional stability of conveyor-belts These universally-applicable supporting rollers guarantee the safe directional stability of conveyor-belts. They are built-in straight in front of the reverse drum, in place of a lower supporting roller. At the slightest swaying to one side, the rollers, which are positioned at the centre of gravity, tip and turn and guide the belt through the friction effect of its chevron-shaped rubber strips back to the centre. Asymmetrical belt loads, sideways overflow and damage to the edge belt selvage or the rubber seal at the sides are reliably avoided. Product features: - High degree of effectiveness - Reliable in application - Protects the belt selvages - Swing-mounted - Easy to refit - Protected against corrosion Areas of application: Conveyor-belts in lignite and hard coal mining, power plants, cement works, gravel, stone and sand pits, foundries, aluminium works, lead and steel works, harbour warehouse operations, chemical works, water and sewage plants, refuse incineration plants and in the wood and metal processing industries. Delivery program: LINEX® centralizing idler are supplied for belt widths of 400 to 2,000 mm. Technical data: Diameter: 190 mm

The LiquiCore™ high-temperature screw heat exchanger enables precise and efficient thermal treatment of bulk materials in the temperature range from around 230 °C to 600 °C. The system opens up applications such as pyrolysis, calcination, high-temperature drying, and thermal activation of solids, thereby significantly expanding the possibilities of conventional screw heat exchangers. In terms of design, LiquiCore™ is different from conventional systems in terms of a newly developed screw shaft, which contains electrical heating elements embedded in a hermetically sealed core of low-melting metal. Once this metal is liquefied, it takes over heat distribution and, due to its very high thermal conductivity, ensures fast, even, and efficient heat transfer over the entire shaft length. Optionally, the trough jacket can also be electrically heated to increase the heat capacity. Since the system is fully electric, there is no need for heat transfer fluids such as thermal oil or the associated infrastructure of heaters, pumps, and pipework. This reduces system complexity and maintenance requirements, as there are no leaks or fluid age effects. At the same time, electric operation enables precise temperature control and fast response times. The design is customized to each individual process requirement. The system uses heat-resistant stainless steels and special alloys, process-optimized screw geometries, and integrated control and regulation technology. This ensures safe, reproducible, and homogeneous high-temperature process control. LiquiCore™ thus offers a compact, robust, and powerful solution for demanding thermal processes in the chemical industry, recycling, raw material processing, and specialized high-temperature applications.

- Details depend on the characteristics of the medium to be fed (density, viscosity, solids content, temperature, reactivity, toxicological properties, etc.) and the respective process requirements (accuracy, feed rate, turndown ratio, counterpressure, etc.) - Applicable feed pumps: piston, diaphragm, gear, hose, rotary piston or eccentric screw pumps, etc. - High-tech weighing system with digital load cell DigiMASS-2 for high weighing accuracy - Heated versions available (electrical, hot water, thermal oil, etc.)

P+W Metallbau - Your Expert for High-Quality Tanks Made of Aluminum and Stainless Steel! Our innovations are not only in silo construction but also in the production of liquid tanks. With decades of experience in metal construction, we offer you a wide range of customized solutions for your individual requirements. Our aluminum and stainless steel tanks stand out with their quality, durability, and reliability. We rely on state-of-the-art manufacturing techniques and use only the finest materials to ensure that our tanks meet the highest standards. Whether for industrial applications, agricultural operations, or other industries, our tanks fulfill all customer requirements, making them the perfect solution for your liquid product. Advantages: - Durability and robustness - Versatile range of applications - High safety standards - Customizable design - Lightweight aluminum construction - Corrosion resistance - Environmental friendliness through 100% recyclable Materials - Excellent heat and cold Insulation - Easy Maintenance and Cleaning

Our LIWELL® screening machines with the Spannwell® principle are the invention of HEIN, LEHMANN. You can say that you are something like the screening technique boss for extremely difficult and / or moist bulk materials. Wherever other machines have to go to their knees, their revolutionary technology has been used around the world for over 40 years for the screening of bulk materials.

Hense Wägetechnik offers precise load cells for tanks, silos and mixer. The unique design of the loading assembly offers safe, precise and simple weighing for vessels from 50kg to 1000t. The force guiding guarantees high resistance against lateral forces and thermal expansion. Totally stainless steel module is also available.The Load cells are very easy to install -the build in rod- and stay bar security is not sensitive against horizontal forces and thermal expansion of the vessel. All modules are available as OIML and ATEX approved version. The 50 and 60t load cells are static approved by the TÜV Darmstadt.

There are many solutions for the problem of elevating crates, cartons, trays, sacks, shrink-wrapped packaging, canisters, etc. With the spiral elevator, HUMBERT & POL has combined all the advantages in a single system. Continual or STOP & GO, operation, Conveying either up or downwards Conveying speeds up to 60 m/min, Can also be used as a storage unit Overlapping conveying slats even at change of direction Automatic tension of the conveying chain Only one drive motor required Minimal operating expense Minimum footprint Simple on site assembly Available in carbon or stainless steel Stable welded construction with enclosed columns Also available in applications where hygiene is required

Pneumatic unloading of trucks and wagons with an integrated compressor or separate compressor station into the silos. Loading systems for trucks, trains, and ships for dry or wet bulk materials. The loading of powdering bulk materials onto trucks, wagons or ships is executed dust-free with MÖLLER loading systems at throughputs to 200 t/h or 1,000 t/h.

Loading Bellows for Truck and Tanker loading

Vortex will display its ATEX certified dustless retractable loading spout for the first time at Solids Dortmund 2017. Vortex's loading spouts are used for loading dry/bulk solid materials into open and/or enclosed vessels like trucks, railcars and barges. The 4-cable lifting design provides maximum stability when compared to the standard 2- or 3-cable systems. The warranty covers any Vortex loading spout cable that breaks due to friction from the pulley. The 3-piece CNC machined pulley features chamfered edges and precision cable grooves to significantly reduce cable wear and back lashing as the loading spout extends and retracts. Because the cables do not fray, cable failure is nearly eliminated and so is costly downtime for repairs. Vortex can also custom engineer loading spout systems to meet any loadout application requirements, including corrosive or hazardous materials, long distances, and extreme temperatures.

Open loading with MBO and MBO-T (T = loading telescope) - for the opening loading of bulk goods into trucks, containers, railcars, ships, hoppers or stockpiles. With open loading in particular, considerable experience is necessary for the conceptualization of the loading system. For the reliable and dust-free loading of coarse-bulk materials such as gravel and clinker, as well as for powdery products. With loading capacities of more than 1,000 m³/h and loading heights of up to 30 m and more.

Absolute reliability and completely dust-tight: MVS bulk loading systems are equipped with a pneumatically inflatable sealing collar on the discharge nozzle. During loading, this closes the annular gap between tank hatch and the discharge nozzle. Brilliantly simple, effective and reliable.

Loading system type MODUFLEX Loading chutes are used in order to loose load bulk solids onto silo lorries, containers and ships without polluting the environment. With the MODUFLEX product range, we can offer the appropriate solution for any application. Tailor-made solutions according to customer requirements are also available. The modular construction of this system is unique. Essentially it consists of: • Inlet with motor winch • Modular section with chute modules on the outside and guide cones inside • Outlet By the modular structure length adaptations are also possible afterwards and repair on the basic of damages of the loading chute can be carried out with minimum interruption of loading. This means low maintenance costs and working expenses. The execution of the loading systems differs in: • closed loading into silo trucks or containers • open loading on flatbed trucks, tips or ships • combined loading

In comparison with loading bellows, hardly any product residues are able to deposit on the smooth inner walls of telescopic pipes. The disadvantage of conventional telescopic pipes, however, is that dust is able to escape from between the individual pipes. Not with the Muhr MVS-TD. The ultimate loading telescope. Highly flexible. Absolutely dust-free.