Application: Subassembly mounted in the loop-type belt storage system. Belt tensioning is performed by a KPG-type winch with a worm gearbox and a 15 kW motor. Components are corrosion-protected by hot-dip galvanizing.

The SWECO LX Low Profile Flow-Thru Separator allows for high capacity wet or dry scalping in a compact, low headroom design. Dual motors mounted on opposite sides of the LX allow unrestricted flow of material and create the 3-D motion that allows oversize material full discharge, keeping the screen clear for maximum product flow. Its low headroom requirements (as little as 15 inches) and straight flow design, allow the LX to fit easily into existing product lines without reworking the entire system

Conveyor belt cleaning at the highest level The PUCEST underbelt scraper roller – an important component for conveyor belt cleaning for greater efficiency. The PUCEST underbelt scraper roller consists of several components: • Drive • Shaft • Scraper blades The patent-pending underbelt scraper roller is used to clean the underbelt. The specially shaped and flexible lamellas ensure reliable removal of the material. The underbelt scraper roller runs against the direction of travel of the conveyor belt and is actively driven by a motor. underbelt-roller-new-11-2024 Advantages over other scraper brushes: Long service life thanks to our PUCEST material The special lamella shape guarantees reliable removal of residual material on the conveyor belt The flexible lamellas adapt perfectly to the conveyor belt Belt-friendly cleaning The individual lamella rings can be replaced at any time Available from stock at short notice in all common belt widths.

Lower chord cladding Cladding of the lower chord is more and more frequently required to provide protection against weathering and for the prevention of accidents. FTK Förderband Technik Kilian GmbH provides lower chord cladding according to your specification from folded flat sheet or corrugated steel sheet with horizontal corrugation with handles ensuring easy handling with elongated holes for trouble free fastening. We will be pleased to offer solutions for housings, e.g., parallel to the lower chord.

For the solderless, screwless and no-stripping inserting and simultaneously cutting of wire ends into LSA punch-down blocks. With built-in retractable hook and unlocking blade. • with built-in retractable hook and unlocking blade • for conductor diameters 0.35 - 0.9 mm and wire diameters 0.7 - 2.6 mm • has a sensor for tracing the wire end position

The main function of the Claudius Peters Lump Breaker is crushing of lumps which have formed, for instance, due to hydration in silos or bins. A horizontal or vertical type lump breaker is available and is used in the discharge area in front of the discharge equipment, for example flow control gates. A rotor with crushing arms in a radial arrangement and displaced on the shaft, draws the lumps against a grate where it crushes the lumps. The operational safety of the Claudius Peters lump crusher is ensured by an overload cut-out with reversing duty. This is realized by an integrated control board.

Work quickly with conveyor belts, grabs, and trucks: A LÜRA arched hall optimally protects your bulk goods, offers ample space, and is extremely robust. The foil roof can extend up to 50 m in width and 20 m in height: A high-quality PVC woven tarpaulin with fire protection class B1 – lightweight, yet extremely tear-resistant and durable. It is tightly tensioned to the circular frame made of galvanized steel trusses. With a white tarpaulin, this ensures excellent light transmission.

LÜRA gable roof halls are the most space-efficient and economical solution for medium and large spans. This is because they are built on LÜRA steel partition walls. As a result, even in very large halls, fewer internal columns are needed to support the roof. This provides you with more usable space. They are also ideal for installing photovoltaic systems: Let the sun shine!

The versatile classic! LÜRA pitched-roof halls are the best choice for small to medium spans, box widths, and depths, and offer highly variable heights. LÜRA steel partition walls form their robust substructure. Stable as a load-bearing structure, multifunctional inside: serving as roof supports, box partitions, and retaining walls. Numerous additional options are available, such as superstructures and canopies.

The JACOB magnetic separator extracts ferrous contaminants quickly and easily from free-flowing bulk materials and exhaust air with low conveying pressure. It can be applied in any industry where ferrous metal needs to be separated from the product flow. One such application is when downstream machinery needs to be protected, for example in plant engineering or in the plastics industry. Another application is the safe production of food products such as flour or sugar. CLEVER DESIGN • Strong magnets – up to nine neodymium tubes separate even the smallest ferrous particles from bulk and exhaust air. Max. magnetic induction (G) – on the surface of the tube (+ / -10 %): 10,000 Gauss. • Compact and robust – consisting of multiple magnetic tubes that are protected by a stainless-steel cover, a T-piece and a pull-ring connection with a detectable design seal. • Easy to clean – pull the separator from the pipework system, remove the magnets from the cover, and all ferrous pieces and particles will simply fall off the cover surface. • Increased food safety – combine the magnetic separator with sealings from the JACOB DETECTABLE DESIGN line.

The MAHR BOW 2000 is used for low-wear is used for low-wear direction change of pneumatic delivery flows. As the delivery flow is forced to the inner radius of the bow, the wear which would otherwise be produced at the bow inner wall is relocated to the material buffer zone which forms during the filling. The distinctive shape of the MAHR BOW 2000 changes the otherwise well-known wear at these critical places. A support buffer forms in the bow immediately after starting the filling which prevents wear on the bow itself and enables long service lives so that the conveyed material is not conveyed on the bow itself but along the support buffer. Clear advantages of the MAHR BOW 2000: Low-wear delivery flow direction change due to own bulk material cushion Low pressure loss Compact design Low purchase and installation costs Low resistance to bends with larger radius

The Vortex Maintenance Gate is designed to shut off material from a hopper or silo when maintenance of downstream equipment is required. In the open position, it positively seals conveying air and material to atmosphere. The hand crank gearing is designed to close through material in case of an upset condition.

Makierungsschild für Reißleine 40x70, 1v Rolle 50 Stück

Branscheid wear reils are made from high-manganese steel X120Mn12 (1.3401). The austenitic structure of this steel gives it its excellent toughness. While the hardness of the steel is between 200 - 220 HB when delivered, the surface hardness can increase to up to 600 HB due to strain hardening during operation.