The humidity measurement sensor with wireless data transmission is available in various versions for different installation situations.

The protection system ANTIDET Relief FQ is used for releasing the explosion pressure and other explosion pollution to the vicinity of the protected device, and unlike in other common elements for the relief, the flame does not penetrate the vicinity of the protected device. However, it still represents a passive element, which does not intervene in the combustion process during explosion. Just like all systems for the explosion relief, it requires the delimiting of sufficient security zone for the explosion products relief, where persons, obstacles, and environment with explosion hazard cannot be present. It further requires the combination with the system for the explosion separation.

Designed for use with square/rectangular explosion vents, FlamQuench SQ technology consists of various layers of high temperature stainless steel which absorb heat produced during the combustion. This allows conventional venting to be done indoors with no release of flame.

Flange encoders up to IEC160 0-60 ppm or 1024 ppm Aluminium or Stainless steel

The FDV flap type diverters have been designed to divert powders and pellets in pneumatic conveying systems. The FDV is available in two versions: the FDV-F type with flange fittings and the FDV-P type with pipe fittings. Both versions are available in aluminium, cast iron and stainless steel, in the ranges 50 - 250 for the FDV-F and in the ranges 50 - 150 for the FDV-P. Larger models are available on request. For the FDV there are 4 operating modes: a pneumatic cylinder assembly, a pneumatic actuator assembly, an electrical actuator and hand operation.

Flash™ explosion suppression systems have been designed to detect and suppress dust explosions in an initial stage by injecting suppressant powder into the vessel. Flash™ explosion systems have been tested and ATEX certified, meet SIL 2 safety integrity levels and are compliant with EN14373:2005 and EN15089:2009 standards. Flash™ systems consist of 3 major parts: − Explosion detector for detection of static pressure, dynamic pressure or light intensity increases − Control unit directing the operation and communication between detector and suppression bottles − Suppression bottles for fast injection of the suppressant into the vessel

Application area: Food industry, Pharmaceutical-/ Chemical industry, Plant engineering Installation situation: Wafer type / Lug type Medium/aggregate state: Fluids, Bulks, Gases Diameter: DN 150 – DN 800 Pressure range: -0,8 bar up to +5 bar* Temperature range: up to +270°C Feature: both sided pressure- / vacuum-tight

WEICON Flex 310 M Classic adhesive and sealant is strong, overpaintable (wet in wet), sandable, has outstanding aging stability and good resistance to UV rays. It is resistant to freshwater and salt water and is free of silicone, isocyanate, halogens or solvents. The product has an ISEGA certificate and can be used as an adhesive in food technology. Flex 310 M Classic is an elastic adhesive on an MS polymer basis and is suitable for the bonding of metals, many plastics, ceramic, wood, glass and stone. WEICON Flex 310 M Classic can be used in metal construction, tank and apparatus engineering, carriage, vehicle and container construction, ventilation and air conditioning systems, in the electrical industry, yacht and boat construction and in all applications where silicones or products containing silicones are not suitable.

WEICON Flex 310 M Classic adhesive and sealant is strong, overpaintable (wet in wet), sandable, has outstanding aging stability and good resistance to UV rays. It is resistant to freshwater and salt water and is free of silicone, isocyanate, halogens or solvents. The product has an ISEGA certificate and can be used as an adhesive in food technology. Flex 310 M Classic is an elastic adhesive on an MS polymer basis and is suitable for the bonding of metals, many plastics, ceramic, wood, glass and stone. WEICON Flex 310 M Classic can be used in metal construction, tank and apparatus engineering, carriage, vehicle and container construction, ventilation and air conditioning systems, in the electrical industry, yacht and boat construction and in all applications where silicones or products containing silicones are not suitable.

WEICON Flex 310 M Crystal adhesive and sealant is transparent, strong, overpaintable (wet in wet), sandable, has outstanding aging stability and good resistance to UV rays. It contains no silicone, isocyanate, halogens or solvents. WEICON Flex 310 M Crystal has an ISEGA certificate and can be used as an adhesive in food technology. The product is crystal clear after curing and is particularly suited for elastic joints where the adhesive should or must not be visible. Flex 310 M Crystal can be used in plastic processing, metal construction, tank and apparatus engineering, in ventilation and air conditioning systems, the electrical and lighting industry, in exhibition stand construction and shopfitting and in all applications where silicones or products containing silicones are not suitable. * = Only tension-free bonding

The unique design of the Vortex Flex Tube Diverter eliminates material cross contamination through a positive seal across the closed port. Pockets where material can lodge and remain trapped have also been eliminated. A smooth unobstructed transition from inlet to outlet shields the wear compensating seals from abrasion.

Flex-Flap Cassettes • Special equipment for reducing dust emissions • Recommended for dump trucks unloading dusty bulk materials • Consulting, planning, design, manufacturing, delivery, and installation from a single source • High reliability thanks to high-quality components • Durable and easy to maintain • Modular system design • Made in Germany

FLEXI-DISC® Tubular Cable Conveyors (also known as Disc Conveyors and Drag Conveyors) gently slide bulk materials through smooth stainless steel tubing using low-friction polymer discs attached to stainless steel cable. The discs and cable are driven by a wheel at one end of the circuit, and put under tension by a wheel at the other end. This design allows single or multiple inlets and outlets, and the routing of conveyor tubing horizontally, vertically or at any angle, through small holes in walls or ceilings. Because components are modular, inlets and outlets can be added, removed or relocated, and the circuit lengthened, shortened or re-routed as needs change.

A more robust way to connect pipes or moving machine parts is a flexible sleeves that is fitted with flanges. Flanges and counter flanges can be custom designed and are available in a wide range of materials, whether it’s flexible or steel.

A quick and easy way to connect pipes or moving machine parts can be a sleeve that is fitted with hose clamps on each side. These types of connectors are usually easy to make and easy to assemble. The hose clamps can be adjusted to any tightness.