- Tumbler Screening Machines - Vibrating Screening Machines - Laboratory Screening Machines - Spare Parts

A glass pipe bend is used when conveying abrasive, usually glass fiber-reinforced materials - for example polyamide. A glass pipe bend must be used, especially where space is limited and radii are small. If this is installed stress-free and is not mechanically damaged, it can be expected to last for years. This is particularly advantageous when installation space is limited and accessibility is poor. To prevent static charging, a copper tape is glued to the outer radius to transfer the charge via the pipe and earthed at the end of the pipe.

For conveying abrasive media or for high flow rates, we can supply you with glass pipe bends made from 3.3 borosilicate glass with a copper grounding strip. These have a service life at least 10 times longer than that of stainless steel pipe bends.

Glatt GF ModFlex - Based on proven fluid bed technology, Glatt offers a newly developed, compact, flexible and modular plant concept for maximum process flexibility, low space requirements, low investment costs, low operating costs, short installation times thanks to plug and play prefabricated modules and ensure operation including hygienic design (EHEDG), high filter performance, integrated WIP and dust Ex version (St 1).

Glatt PHOS4green technology is a groundbreaking waste-free process that recycles the phosphorus from ash to produce ready-to-use high-quality fertilizers. In the first step of the two-stage "PHOS4green" process, a suspension is produced from the phosphate-containing ash, a mineral acid and, depending on the objective, other components. The suspension is then spray granulated in the fluidised bed. This results in fertiliser granulates that are available to plants and soil, which can be discharged, filled and delivered directly after the desired grain size has been reached.

The Glatt ProAPP® Lab is suitable for feasibility studies, testing of material and/or process ideas and the production of initial samples and test batches. This reactor can be operated between room temperature and 900 °C (optionally up to 1300 °C). This wide temperature range is achieved by the innovative design of the reactor. The Glatt ProAPP® is particularly suitable for initial experiments with large parameter variations and for optimizing the material system. It can be operated under inert conditions in addition to the oxidizing regime. The Glatt ProAPP® Lab pulsation reactor can produce approximately 100 to 500 grams of powder per hour.

Our all-round system for maximum flexibility on a laboratory scale: Modular processing applications permit top spray, bottom spray and Wurster coating for fluidized bed, spouted bed or rotor processes in continuous or batch operation. Whether you're dealing with spray granulate or fluid encapsulation, agglomeration for powders, powder coating or particulate coating: Anything is possible.

Special features: • Ergonomic working height • Alternatively with or without product transfer port • Low-contamination feeding of the containers through product transfer port • Easy handling of the containers with roller conveyor in front of and inside the glovebox • Covers of the transfer port chambers actuated reciprocally, 2-hand actuation • Both chambers with holding flange for (optional) independent filter device or for connection to central filter • Product storage in material hopper or closed sending container • Large transparent viewing window with clamping and folding mechanism for cleaning • Internal lighting in the product transfer port and feed chamber • Application of e.g. dried compressed air for hygroscopic substances possible • Grating to remove coarse contamination • Discharge shaft into empty sack compactor or endless sleeving • Antistatic working gloves • Installation: mobile on castors/forklift shoes or permanent • Outlet DN100 Tri-Clamp for individual discharge units • Material: stainless steel 1.4301 or higher, surface pickled and passivated • Also suitable for requirement as per Directive 2014/34/EU (ATEX)

GMK 2410 is based on poly­chloroprene (CR) for the high-strength, full-surface and flexible bonding of: - rubber to rubber - rubber to metal WEICON GMK 2410 also bonds cellular rubber (e.g. neoprene), leather, felt, insulating material, textiles, wood, and many plastics. GMK 2410 is not suitable for materials like expanded polystyrene, polyethylene, polypropylene, flexible PVC foam, and artificial PVC leather.

GRANIT Plus consists of a metal-reinforced rubber molded part and a two-part flange to be attached behind it. The flanges are used for hoses, which are mainly used in heavy industry and mining, but due to their reliability and practicality they are also suitable for a number of other applications. The most important advantage of the loose flange is the free, unobstructed central flow in the connection point, the elimination of elastomer seals and the and the possibility of free flange alignment, as well as the short design.

The GRANIT Select hose connectors are matched to the conveyor hose system in terms of design, material and safety. The material used is light-weight, strong and heat-resistant. The couplings can also be treated with a chemical-resistant surface coating. The dimensions of the flange bores correspond to DIN 2501 PN 10 and ANSI 16.5 (150 PSI). When used with the appropriate polypropylene or EPDM flat gaskets, a secure full flow hose connection is created.

Technical data Compact butterfly valve for installation between flanges EN 1092, PN 10/16 and ASME Class 150. Two-piece body, self-centring, valve disc and shaft in one piece. Wear and abrasion resistant design, without seals in the media flow. Circumferential annular gap between disc and housing, adapted to your requirements. Disc and housing in polished design available on request. Switching in upright product column (depending on medium) possible. Nominal sizes DN 50 - DN 500 Face-to-face dimension DIN EN 558 Series 20, API 609 Table 1, other face-to-face lengths available on request Mounting flange DIN EN ISO 5211 Certifications Possible in consultation (FDA approval, foodstuffs certification 1935/2004, ATEX) Applications and industries Silo systems Solids (granulates, powder) Bulk solids technology High purity plastic granulates Chemical industry Food industry

The pair of rollers is built up in a torsionally rigid base frame. The low overall height simplifies retrofitting in existing systems. Thanks to the modular construction system, multiple grinding steps can be carried out without changing the machine. The rollers can be dismantled to the side or to the front without dismantling the machine, depending on the size. The continuously adjustable roller is spring-loaded, which prevents damage to the machine in the event of a foreign body passage of up to 20 mm.

In the production of plastic granules, our BC-M coating with WC shows very good wear resistance. The big advantage is a continuous, even hard material coating that does not flake off during use.

IFA Technology offers gravimetric and volumetric dosing systems as well as flocculant and viscosity-control systems individually tailored to your production requirements. Key Features & Benefits: - Gravimetric dosing ensures precise weight-based metering with recipe control, ideal for high-accuracy dosing even at small quantities - Volumetric dosing uses flow-measurement and metering pump technology for fast, volumetric-accurate dosing suited to large throughput requirements - Additional system variants (flocculant dosing, viscosity control) available for specialized applications Customer benefits: - precise, reproducible dosing - efficient automation and turnkey supply including engineering and after-sales support Applications: Solids and liquids across multiple industries where high dosing accuracy and consistent quality are required.