Impeller valve for shut-off and control of product streams in the bulk industry. The impeller valve series FS is designed for a safe and consistent discharge of rapid flowing products in the bulk industry. They ensure a noticeable reduction of demixing during discharge and guarantee no compaction or levigation of products during charge and discharge. This valve is suitable for a measured control and dosing of product streams.

The automation level in the food, pharmaceuticals, and chemicals markets is developing rapidly due to the adaptation of new solutions globally. The acceptance is increasing thanks to the obvious benefits of automation, such as improved product hygiene and employee safety. Heightened consumers' expectations and legislative agency regulations also force manufacturers to re-evaluate their processes, but there are still some reasons why they choose not to invest. Currently, manufacturing plants often consist of separate silos of automation where process steps are not entirely connected. One of the main concerns against the adaptation is the organisation's lack of acceptance of new technologies. A high fluctuation rate and the scarcity of trained, competent operators or technicians makes it difficult to take the leap. Therefore, all new equipment introduced must be as user-friendly as possible in order to decrease employee onboarding time and to reduce the possibility of human error. Piab has taken all the above requirements into account when they developed their new product series, called the piFLOW® Batch Volume Optimisation, besides their standard piFLOW® vacuum conveyor range. The Batch Volume Optimisation functionality is easy to maintain, compliant with industry standards, and enhances productivity dramatically. The vacuum conveyor takes solids from a pickup point and releases them into a receiving vessel or a piece of equipment in batches. Batch Volume Optimisation features a level sensor. Once the conveyor is filled up by each cycle, the sensor automatically triggers the release process. This way, operators can set the conveyor up quickly, and the automatic level sensing adds an extra layer of safety, which protects the equipment from unplanned maintenance.

We produce all our silos and plants in our own factory in Halle (Saale). By bundling the design with the production at one location, it is possible for us to respond quickly to any changes that may occur or to identify problems at an early stage. We can respond flexibly to your wishes with our state-of-the-art production facilities. For instance, the plasma cutting machine, tube cutting machine and CNC bending machine receive data records directly from the technical office. In this way, solutions from the 3D programme are transferred directly to the production technology and implemented in the shortest possible time. You want to know more about our manufacturing options? Go ahead and ask us about them!

Indirect Cooling Drums from Allgaier are used for cooling hot and very hot solids from calcining drums and rotary kilns and enable very effective recovery of thermal energy. Many bulk materials such as powdery or granular products must be cooled before further processing. In addition to direct or convective cooling by means of air, indirect cooling offers a very effective alternative due to the possible recovery of thermal energy. The system is particularly suitable for cooling titanium dioxide (type RKT) and calcined gypsum (type KTR). Functionality: With indirect cooling, the hot solid is moved along one side of a separating apparatus wall, while the air cools the wall from the other side and is thus not in direct contact with the bulk material. Due to the high temperature differences, a very effective heat transfer occurs from the hot product through the walls of the cooling tubes into the cooling air. Benefits: - High efficiency: As a result of the heat recovery from the hot solid, there is a short amortization period for the investment. - Minimal process costs: Savings in primary energy and fuel through use of the preheated, dust-free and dry cooler exhaust air; consequently, filter systems for post-treatment of the warm cooler exhaust air are not required. - Robust design: Robust and durable design. - Environmentally friendly: Heat recovery makes a significant contribution to sustainable management and environmental protection; natural resources are conserved.

Indirect Drying Drums use hot air as a convective drying technique. This enables significant savings in primary energy and fuel by using the preheated, dust-free and dry cooler exhaust air. The reduced oxygen atmosphere makes it particularly suitable for use in drying products containing solvents. Indirect Drying Drums are particularly suitable for non-adherent, easy-flowing and fine-grained bulk materials such as zeolite, gypsum, silicate powder and titanium dioxide. Functionality: In indirect drying, the dampened material is moved on one side of a separating apparatus wall, while the apparatus wall is heated from the other side. Because of the high temperature differences, a very effective heat transfer occurs from the hot apparatus wall into the bulk material, heating and drying it. Benefits: - High efficiency: Low investment costs for exhaust air filters, low electrical energy requirements due to low process air volumes. - High safety: A reduced oxygen atmosphere is possible to avoid product oxidation or to avoid/reduce harmful exhaust gas flows. - Minimal process costs: No filter systems necessary for after-treatment of the warm cooler exhaust air. - Robust design: Robust and long-lasting construction.

Pneumatically driven: - for 5 - 1.000 l containers - Rigid or foldable agitators - Continuous 3 buckets or blades - Three different angles of buckets - Approval according to 94/9/EC (Ex) Electrically driven: - For 5 to > 500 m³ vessels - Power from 0,12 kW - 45 kW - Speed 3 - 1.500 rpm - Different agitators

We develop custom machines and intelligent automation solutions that are precisely tailored to your processes – from planning and programming through to commissioning. Using state-of-the-art technology and many years of experience, we make your production more efficient, more flexible, and ready for the future.

WEICON Industrial Cleaner is suitable for universal use. It cleans, degreases and evaporates without leaving any residues. The cleaner removes grease, oil, soot and other soilings and residues. It cleans many surfaces fast and easily, such as metals, glass and many plastics. Industrial Cleaner can be used in many different areas. It is even suitable for sensitive surfaces, such as plastics, rubber materials or powder-coated metal pieces. The cleaner operates with a highly compressed propellant. Therefore, it has a very high active ingredient content of 95 %. This means that the cleaner is very economical, so one container covers a significantly higher number of applications.

Do you have problems to transfer liquid media or gases from A to B without temperature loss? Or do you want them to be heated up from temperature X to temperature Y? Heating and heat conservation: Competent, innovative and economical If you are looking for a technically and financially optimal solution for such tasks, then you should call on us. Because we deliver the accumulated know-how of over 35 years of application experience. Thousands of electrical heating systems that we have designed and manufactured (heating hoses, heating tapes, heating mats) still do their job today, even after decades of service at the customers.

Industrial type gear units operate especially under heavy working conditions, have rigid case, bear high moments up to 480000 Nm and stand out with silent operation and easy maintenance features.

Cleanliness in the process chain Complies with current food regulations · Hygienic Design · Can be integrated into the Good Manufacturing Process (GMP) · Stainless steel

High-performance vacuum suction systems are used to remove bulk materials, dusts and residues from plants, silos and confined areas safely and efficiently. This method supports maintenance, cleaning tasks and rapid response to incidents. With strong extraction capacity and mobile equipment, many operations can be carried out with minimal downtime.

Single-Phase AC Vacuum Cleaners WS-series: Small but powerful Industrial vacuum cleaners with single-phase AC motor turn up all over the place. Coping effortlessly with wood and cement dust as well as debris from the latest polystyrene wall insulation products, these portable multitaskers operate exactly where you need them.

Three-Phase Vacuum Cleaners R01 R-series: Powerful cleaners for continuous operation These industrial vacuum cleaners with suction turbine and three-phase motor are ideal for continuous operation. They come in a range of sizes and can also be supplied with extra soundproofing or as explosion-proof versions. Versions suitable for asbestos removal are also available.