RUBERG-Container Batch Mixers MULTI-PURPOSE Handling and Excellent Mixing Qualities We have taken up customer requirements for reduced plant engineering with simple logistics for the handling of existing containers, and have this developed the CCM-U and CCM-O series of the RUBERG Container Batch Mixer. Operating Method: The products are commissioned in containers or that are usual in trade in special containers of up to approx 2000 litres (GMP-conforming). The containers are integrated into the mixing process by docking to the slewable mixing chamber. A distinction is made between containers that are joined to the chamber from above (CCM-O) and containers that are joined from below (CCM-U). The mixing principle in all its variations is the same as that of the RUBERG Precision Batch Mixers. Design Variants: Containers with inlet or discharge cones and containers that can be completely opened at the top are suited for operation with the CCM-U series. The whole unit, with the container linked up at the underside, swivels into the working position and the product is completely discharged into the mixing chamber. The closed system prevents any emission of the product. Aspiration and filter systems can be dispensed with. The slow-running mixer, with gentle action on the product, in a very short time produces a completely homogenous mix. After that the unit returns to its initial position. The turning mixing tool supports the complete emptying of the product which is re-fed into the container. The container is then uncoupled and released for further use. For more details and informations please visit our booth E19-4 or get in contact with us by phone or mail!

Here you will find some informations about our exhibition machine: RUBERG Continuous Mixer Type DLM 350-1500 Throughput: 10 cubic m³ / h Driving power: 4.0 kW Speed: 0.5 m / s up to 25 m / s Oberating length: 1,500 mm Design: mixing chamber made of stainless steel 1.4301 (AISI 304) mixing paddles made of stainless steel 4 liquid Addition nozzles Manufactures sizes: 0.5 up to 400 m³ / h Options: normal steel design mixing chamber with non sticking lining variable weir solid injector heating and cooling jacket moisture measuring System dosing control Impact scales For more details and informations please visit our booth E19-4 or get in contact with us by phone or mail!

RUBERG-Laboratory Batch Mixer LCM series: Product development micro batches Operating method: Quantities of products are collected in commercially approved barrels and docked to the mixing chamber. The complete unit is swivelled into the working position and the process started. Variable rotational speeds circulate large volumes of the product components in a gentle mixing action. Simultaneously material is horizontally distributed by the mixing arms. Within a short period of time the optimum mixing quality is achieved and the unit can be swivelled back into base position. The homogenized product is emptied completely into the container which is then undocked and transferred to the further processing. have various applications for laboratories or small production quantities, including development of recipes and product development of pure dry mixes, addition of liquids into dry materials and pure liquid mixes. Also possible is a gentle product treatment for homogenization of sensitive material through to breaking down of agglomerates by using a cutting rotor. Further options of processing are heating and vacuum mixing. Reproducible trial and comparison mixes are parts of product development and quality assurance which can not be neglected. Design Variations: •Stable desktop model •Mobile unit arranged on movable support •Cutting rotor for breaking down of agglomerates •Addition of fluids by ISR system •Heating or cooling jacket with insulation •Complete automation for production •Computer controlled with Report For more details and informations please visit our booth E19-4 or get in contact with us by phone or mail!

RUBERG Lump Breaker Series KBR Application: RUBERG lump breakers are used for reducing compacted bulk material and raw materials in various industrial sectors. They homogenize grain sizes and the bulk material’s passage, thus providing for an even product discharge from bins, silos, big bags, sacks etc. into conveyor systems, mixing units, process plants, packaging plants etc. Design: Made of high-quality either stainless or special steels, with wearresistant coatings or hygienic surfaces with appropriate sealings RUBERG lump breakers can be broadly used in bulk material, chemical, pharmaceutical and food industry sectors. Produced in accordance with GMP, FDA and ATEX standards. For more details and informations please visit our booth E19-4 or get in contact with us by phone or mail!

Ruberg Precision Batch Mixer Homogenizing, coating, moistening, crystallizing, to feed gas and to degas, foaming, vaporizing, fluidizing, and drying - these are examples of operations which are to be carried out by the RUBERG precision batch mixer regarding the different products to be mixed. In these fields the mixer can be used efficiently and flexibly. The special characteristics of the finish and the jointless design radially symmetrical with rounded off corners make germproof and sterile production possible. Special process-technological and engineering criteria such as thermal, pressure and vacuum-related or internal gas conditions are some of the examples of the performance variants of the RUBERG precision batch mixer mixer. Mixer Performance: A very high degree of mix quality is obtained within the shortest time (60-180 seconds). With variable speeds adapted to the mixing product, an extremely gentle mixing or addition of coarse-grained materials is possible, likewise an extremely intensive dispersion of fine powders, paints / varnishes or liquid materials is achieved through high speeds. Process steps like tempering, reacting or agglomerating under pressure or in vaccum For more details and informations please visit our booth E19-4 or get in contact with us by phone or mail!

RUBERG Reactor Mixer for powder, granulates, from low to highly viscous liquids, ... Process: Heating, cooling, drying, homogenizing, gasificaton, degasification, crystallizing, foaming, ... these are only few process examples for RUBERG Reactor Mixers. In such cases they can be used with their high Performance and flexibility. Special surfaces, gap-free finish as well as Rotation symmetric radii enable a germ-free and sterile production. For more details and informations please visit our booth E19-4 or get in contact with us by phone or mail!

NERAK continuous vertical conveyors can provide considerable space saving over more conventional inclined conveyors and can be configured for "S" or "C" shape. A series of polyester rods form the platforms which are carried by NERAK rubber block chains, providing quiet smooth running with high throughput rates.

The basic principle of the MIXACO sack and drum mixer Speedy™ is the mixing of small batches directly in sacks or drums. The product remains in its original container throughout the entire workflow—from filling and mixing to conveying and discharging—thereby significantly reducing costly, time-consuming cleaning times. All Benefits at a Glance: - Only one container required for weighing, mixing, conveying and packaging the product - No refilling or transferring required - Short tool cleaning times - Highly flexible - Many combinations of tools and motors possible for a wide variety of mixing applications - Low energy consumption

Integrated vibrating sieve for separation of contaminants (e.g. packaging residues). Contaminants can be immediately removed using a sieve located at the top. Disolution of small lumps. Particularly suitable in the case of frequent product changes and hygienic requirements. Easy-to-clean due to foldable construction and fast sieve exchange without tools.

We offer fixed, mobile and combined filling equipment for: _Big-Bags, drums, boxes with/without in-liners _Single bags made of different material (PE, PA, PP, paper, laminates, etc.) _Endless- as well as containment-foil _Container _Other types of packaging

THE ADVANTAGES OF THE CLOSED BELT CONVEYOR AT A GLANCE • Weatherproof and dust-free transport of bulk material • Easy circumvention of obstacles • Eliminates product transfer points • Low space requirement for the belt conveyor thanks to tight curve radii • Simplified installation planning • Simple relocation of the complete belt conveyor DATA AND FACTS • Maximum filling level: 60% • Maximum material weight: 40 kg/m • Maximum belt speed: 3 m/s • Horizontal radii: > 8m • Gradients: < 30° • Heat-resistant up to 80°C • Durability: friction, ozone, UV (optional: oil and grease)

When C-parts become a burden You know that: With C-parts you can hardly save today. While there there are always cheap offers - but the effort to find them is disproportionately high. Research, price inquiries and the like take time. With the amount of C-parts, from screws to hygiene articles, the Procurement quickly becomes a burden. A and B items earn significantly more attention. MORE EFFICIENCY – REDUCED COSTS! With more than 30 years of experience, Safeline® is a strong partner at your side Side. Know as a wholesaler of supplies for industry and trade not only the market, but also the needs of our customers. Greater efficiency in procurement with reduced costs – that can be done quickly become the decisive competitive advantage. SOLUTIONS THAT RELIEVE YOU! Individual support and active problem solving are our greatest strengths. We put your benefit ahead of ours. We accept challenges and seek solutions. How exactly do you feel about C-parts management from us you can find out in the attached pdf. Brochure.

Founded more than 30 years ago as Bühning & Joswig GmbH, Safeline DEXIS today one of the leading suppliers of necessities for industry and trade in NRW. We offer you much more than just occupational safety, tools and machines: We see ourselves as problem solvers and actively support you in procurement. At Safeline DEXIS you get everything you need for everyday work – quickly, reliably and from one Hand. Your advantage: With Safeline DEXIS you can reduce the procurement costs of your C-items to a minimum! You can find out more about this in this brochure. Take care of your purchases easily and conveniently - online in the shop, in a personal conversation with our sales representatives or on site in our sales rooms in Dortmund. Competent professional advice, fast delivery and service across the board – that is the key to success of Safeline DEXIS. And we will continue to build on this in the future.

The INFA-INLINE filter INF is a non-cleanable safety filter used to protect compressors and processing machines, e. g. in closed loops. It can be arranged on the over-pressure side or suction side. When the max. allowed filter pressure drop is reached the filter cartridges will be replaced. The essential constructive elements base on the proven AJM series. The housing strength is designed for over pressure / low pressure up to +/ - 0.5 bar g. The filter housing can optionally be made of stainless steel.