Our octabins are manufactured individually according to customer requirements – from standard octabins to telescopic octabins and pallet octabins in 1200 × 800 mm or 1200 × 1000 mm. Matching liners are available, and we can flexibly handle even small production runs.

The OMC 2500 reliably and precisely determines the moisture content or dry matter of bulk materials, suspensions, or pasty substances online. The measurement is non-contact and uses near-infrared (NIR) light. Due to the significantly longer wavelength of NIR compared to visible light (VIS), it penetrates the material more deeply, regardless of its color. The OMC is largely insensitive to irregularities in the material being measured, such as particle size and variations in material thickness.

Our experienced, multilingual installation teams install the optimum wear protection lining at the customer site in large-scale and permanently installed plant components such as bunkers, silos, cyclones, or trough chain conveyors. Our employees are available as competent contacts for every technical field. - Immovable plant components and plant components that cannot be transported due to their size or for reasons of cost are lined directly at the customer site. - If desired by the customer, we offer an all-inclusive package: Scaffold construction, sandblasting to prepare the surface to be lined, disassembly, and proper disposal of worn linings - Optional: Supervision to instruct and supervise the customer’s own team of fitters. - Regular checks and maintenance conducted by installation specialists, if necessary, even 24/7 around the clock

The silo is a further development of the ingma plain wall silos in plug-in construction. The new silo is airtightly welded on the inside and outside and smoothly smoothed on the inside, thus guaranteeing the best possible hygiene. The requirements of EC Regulation No. 1935/2004 are permanently guaranteed by being made in one piece, without joints through assembly joints and smoothly welded welds in the interior, as well as when the parts in contact with the product are made of stainless steel 1.4301. The silo body consists of a silo shaft, discharge funnel and the cell ceiling. The silo walls are manufactured in a sandwich construction, in which an inner skin made of 2.0 - 3.0 mm stainless steel sheet and an outer skin made of 2 mm steel sheet are separated by 80 mm air space. The absolute tightness of this air space in the entire silo body can only be guaranteed by manufacturing it in one piece. When storing warm material, rapid temperature differences are delayed by 80 mm due to the insulating air layer of the sandwich construction and condensate formation with the consequences of mold growth is largely avoided. The cell ceiling is designed for a traffic load of 2.5 kN / m². The silo is manufactured in one piece and delivered in one piece after successful testing and acceptance. The silo body has appropriate eyelets so that it can be transported both horizontally and vertically. A main crane and a smaller auxiliary crane are required for assembly. This compact design minimizes assembly costs. The scope of delivery includes the provision of a testable but unchecked, static calculation of the silo according to Eurocode 3. In the case of silo cells without pressure relief, appropriate protective measures must be taken to prevent sparks from entering the silo cells on site.

As a rule, two-part star filters, where the support tube can be reused, are beneficial for our planet as they conserve resources. However, sometimes one-part star filters are also desired and are better suited for some applications. We have therefore expanded our portfolio of filter elements to include one-part star filters. These have a stainless steel end plate at the top and bottom and an integrated stainless steel support tube. The filter medium is firmly cast on both sides. Polyurethane or silicone is used depending on the requirements. The upper end plate has our standard thread and can be easily installed in existing systems. Standard lengths are 20, 40, 60 and 100 cm, but intermediate lengths can also be realized.

Simplify your information flow for future-proof production We revolutionize your production by providing our customizable modular system ONEexchange, which automates and digitizes your machines, production lines and plants, creating highly efficient and transparent production.

Efficient production needs informed operators ONEoperate creates transparent and comprehensible processes in production and is the central point for your operating staff to make settings and access information. You work less. Your machines work more. Your employees should be able to concentrate on your production. Handling the automation must therefore not be an additional burden for the operating staff. By concentrating on a central operating unit, the entire handling of the system is greatly simplified.

Keep an eye on all processes ONEview supports your process management by reading data from your machines in real time and preparing it in a user-friendly graphic form. Transparent production visualization Everyday production is primarily determined by the smooth flow of information. Fast and correct decisions based on relevant information ensure the decisive competitive advantage.

As a manufacturer of various online moisture measurement systems in the field of process control, we offer you the optimal solution for each application. Online moisture measurement on bulk materials The MicroPolar measures the moisture content of a wide variety of bulk solids online. The measurement takes place on the conveyor belt, bunker, silo, or on a shaft. The microwave transmission technology provides a noncontact measurement of the entire material cross-section. This results in an accurate and representative online measurement for quality assurance and process optimization. Typical areas of application for all kind of bulk materials are found in mining, power plants, coking plants, chemistry, building materials, wood and paper industry.

Measurement of viscoelasticity, homogeneity and concentration in real time As experts in ultrasound technology, we offer unique possibilities in measuring online product characteristics via our patented ultrasonic spectroscopy analysis. This enables us to provide crucial information on product and process states, including viscoelastic properties of the product, homogeneity, product physical-chemical states, and concentration. Viscoelastic properties are key quality parameters in many industrial production processes such as rubber polymerization, and wherever it is important to control the transformation process. Our online measurement facilitates optimal process control, leading to cost-efficient energy consumption and reduced raw material waste. Our measurement systems are simple, robust, and reliable. Across industries from the food to chemical to rubbers and polymers, the areas of application for the systems are almost limitless. Our solutions provide real-time and contactless data on the product being manufactured.

State-of-the-art communication from a database directly to scales | mixers | conveyors...

Engineering that understands. Control cabinets that deliver what they promise. We plan, build and deliver precision automation technology – ready for tomorrow's requirements. Whether it's a single system or a fully networked production system, our engineering team implements well-thought-out automation solutions that not only work on paper, but also in everyday use. From circuit diagrams and PLC programming to the finished control cabinet, we offer everything from a single source – with the utmost care, compliance with standards and practical experience. Our control cabinets are robust, EMC-compliant, easy to maintain and designed for demanding production environments in plastics processing. We rely on state-of-the-art components, structured wiring and clear documentation – all precisely tailored to your processes. As an integral part of our OPD system world, our solutions integrate seamlessly into SCADA, PLC and digital twins – for a continuous data flow from the sensor to the cloud. Engineering made in Germany – for efficiency, safety and a digital future.

Visualisation that can do more. Control that thinks ahead. With OPDWin SCADA, you can get the most out of your processes – transparently, securely and scalably. OPDWin SCADA is more than just classic process visualisation. Our scalable solution enables intuitive, in-depth control and monitoring of your systems – individually configurable for the requirements of modern plastics processing. Whether in raw material handling, the mixing process or peripheral systems: OPD SCADA delivers precise real-time data, intelligent alarms and user-friendly interfaces that effectively support your employees. Thanks to its modular architecture and open interfaces (e.g. OPC UA, MQTT), OPDWin integrates seamlessly into your existing system landscape – from individual machines to control stations. Safety, efficiency and transparency are at the heart of the system: OPD SCADA gives you full control over your production processes and creates the conditions for data-based decisions in real time. Rely on a SCADA solution that thinks for itself – OPD SCADA. Made for bulk materials. Made for performance.