Weighing bellows are for the flexible connection of mixers, feeders or vessels on weighing cells to supply lines, drain pipes or other forms of air transport or powder transport. These anti-static weighing bellows are suitable for ATEX zones.

Application area: The MAHR cone closure makes pressure-tight seals of material filling openings. The main application area is the sealing of high pressure discharge vessels in high pressure conveying systems. Material: Case: grey cast iron, cast stainless steel Flange: steel, 1.4301, 1.4571 Sealing cone: grey cast iron, cast stainless steel Sealing ring: groove ring made of Hydrofit, Teflon, Viton Design: The cone closure consists of the case with sealing cone and the drive. The joined parts are sealed in each case with O-rings. The sealing cone is opened and closed using a lever design and a pneumatic cylinder. The seal is made by pressing the cone against the groove ring inserted in a steel ring. Electropneumatic equipment: The pneumatic drive is equipped with a 5/2 way solenoid valve. The cone closure has a limit switch in each end position for standard signalling. Operating data: control pressure: min. 3.5 bar operating pressure: max. 16 bar Special features: Absolute leak tightness as the tank interior pressure supports the seal due to the design. Low wear as the sealing ring does not come into contact with the material flow.

Ideal mixing quality for quick and gentle drying, moist and viscous materials at variable filling levels The spiral mixing blade initiates a three-dimensional flow of the mixing goods; conical designed mixing vessel enables powders to be discharged up to 100%. The reactor is vacuum and pressure tight and heatable by steam, thermal oil or water. Fully temperature controlled: the mixing vessel, the mixing arms, the spiral blade. The mixer can be designed to conform with FDA standards to be used as a sterile mixer and reactor which also meets EHEDG requirements and the 3-a-sanitary standards.

Our CONIDUR® perforated plates, individually made by experts, play in a whole new league - because the special manufacturing process of HEIN, LEHMANN ensures the finest triangular to semi-elliptical perforations. Exactly these make the difference: The special properties of these perforations significantly improve the quality of your products and open up unprecedented procedural possibilities in sieving, separating and conveying technology.

Connection system with integrated dedusting unit for FIBC discharge (no separate filter required) FIBCs: with or without inner liner AGW / OEL: 100 – 5.000 µg/m³ Products: Nonhazardous Design: Industry, chemical and pharmaceutical industry

WEICON Contact VA 100 is a universal type for the bonding of metals, plastic and rubber, both to and among each other. VA 100 is ideal for the "do-it-yourself" area, but can also be used in many areas of industry.

WEICON Contact VA 1401 has medium viscosity (100-150 mPa•s) and hardens quickly. It shows good results on fabric, paper, cardboard, cartons, foam rubber and large-pored elastomers. VA 1401 is a universal type for the bonding of metals, plastics and rubber, both to themselves and among each other.

WEICON Contact VA 30 Black has medium viscosity (300 mPa•s) and is temperature resistant between -50°C (-58°F) and +140°C (+284°F). It has a longer curing time, is rubber-filled and black, hardens with residual elasticity and has high peel and impact strength. Thanks to its curing with residual elasticity, WEICON Contact VA 30 Black is particularly suitable under changing climatic conditions. It is insensitive even under a longer infl uence of humidity. VA 30 Black is ideally suited for the bonding of diverse rubber materials such as solid rubber or cellular rubber, plastics and metal/plastic joints.

FOR THE BLENDING OF COMPONENT-BATCHES INSIDE THE IBC -> IBCs are locked into the turning mechanism either manually or by a hydraulic clamping machanism -> Components are blended gently in a turning and rotating container

Ideal mixing quality for dry and moist materials at variable filling levels The spiral mixing blade initiates a three-dimensional flow of the mixing goods; creating a spiral upward movement on the periphery and downward flow in the centre. This patented mixing tool provides very good mixing results. It can be used for dry powder and wet suspensions.

MIXACO has been an innovation leader in the mixing industry for more than 50 years. Many of our inventions and patents have been developed hand-in-hand with our customers and have become an industry-wide standard. MIXACO proudly presents the new Container Mixer i4. It represents the characteristics of Industry 4.0 / IoT applied in the mixing industry. Outstanding mixing flexibility, high quality and cleaning efforts reduced to a minimum is what it stands for. Equipped with the new MIXACO Control Center (MCC) we set a new milestone for high efficiency mixing plants.

MIXACO proudly presents the new Industry 4.0 container mixer fleX. One mixer for different container sizes. For even more flexible mixing on a large scale and with frequent recipe changes. The novel and automated tool and container detection enables large throughput ranges in just one i4 fleX mixer. Innovations combine to create an advanced industrial mixer with longer life cycles and lower maintenance requirements.

The MIXACO container mixer Multitool™ is ideal for the careful mixing of temperature-sensitive materials. An innovative mixing concept with new tools and a special process enables mixing without temperature increase. All Benefits at a Glance: - Minimal product heating - Optimum homogenization - Adjustable comminution rate - No fusion or adhesion of material - Reduced cleaning time - User-friendly, ergonomically optimized cleaning in preconfigured cleaning position - Material transport in mixing container for greater logistical efficiency - High flexibility - Wide range of tool and motor combinations enable use in many different mixing tasks - Low energy consumption

HECHT's Containment Drum Discharger CFE-K-EC with tipping device and "Easy" port is used for low-contamination discharging of drums with inner liners up to OEB 5. Thanks to the new EC-port which is part of our "Easy Connect" Family, drums can now be exchanged significantly easier and more economic. The new technology enables a drum exchange nearly free of any consumables. The increased operator convenience and still high Containment conditions are strong arguments for this new technology. By means of the tipping device drums can be connected easily. The products supplied in drums are additionally packed in foils, also referred to as liners, to ensure operator- and product protection.

The patent-pending HECHT containment drum emptying station with tilting device "CFE-K-OC" combines maximum containment with semi-automated drum handling. It enables low-contamination, safe and ergonomic emptying of drums up to OEB 3. The entire process - from lifting the drum and positioning it at the airlock to automatically removing and replacing the drum lid - is semi-automated. This minimises manual intervention and therefore increases operator safety, process stability and efficiency.