The sealing system was developed for highly abrasive or very sensitive media. Available for all resilient seated butterfly valves with interchangeable seat. In closed position, the liner will be pressed against the disc using low air pressure.The media is sealed off securely. Before opening the disc, the chamber is vented behind the liner. This creates an air gap between the liner and the disc, hence low torque is required to open the valve. ADVANTAGES Extremely low wear of parts even in contact with abrasive media. Low sized actuators due to reduced torques. Low grinding/-clamping of sensitive media between disc and liner.

T&B's new system for the early detection of potential fire risks based on an infrared camera fulfils today's increased requirements for preventive fire protection in plants – as a reliable solution in accordance with the applicable standards and regulations. Depending on your processes and the requirements of your insurance company, you can receive the camera with the required certification: either certified according the VdS or the EN 54-10. It is therefore suitable for realising standard-compliant systems for fire prevention in installations. Depending on the operator's requirements, it is possible to control an extinguishing system and connect to fire alarm systems or fire brigade control centres. To effectively prevent fires, T&B electronic combines the infrared camera with its certified extinguishing systems for comprehensive protection. This is becoming increasingly important in this sector in particular: waste disposal companies only receive adequate insurance cover under strict conditions – due to the extreme increase in fire incidents in the last year alone.

Oil condition sensor for continuous monitoring of the mechanical properties of liquids. Operating voltage 9...32 V DC Housing material: stainless steel Protection class: IP 67 Dimensions: 30 x 90 mm Process connection: G 3/8" Electrical connection: M12-8 A-coding Weight: 150 g Signal output: 2 x 4...20 mA Bus protocol: Modbus RTU, CANopen

ViscoScope® from MARIMEX® sensors for viscosity measurement. With ViscoScope® we have developed a maintenance-free inline measuring system that allows you to monitor viscosity precisely, reliably and in real time directly in the process.

- made of bended and deformed Corthal-wear plates or inside hardfaced pipes - available in standard or also special dimensions - requested lengths and bow radiusses in segmented constructions

- made of Coroplate- wear plates - intake and outrun in circular cross section - extreme stressed outside bow as flanged changeable wear plate

Inox 200 w. QC6

Learn more about our latest technology—LiquiCore—in the insert to our product brochure.

- made of bended and deformed wearplates or inside hardfaced pipes - available in standard or also in special dimensions - requested lengths or bow radiusses in segmented construction

Inspektionstür in verschiedenen Abmessungen schneller Einbau einfach Nachzurüsten mit intregrierter Sicherheitstür

Novindustra assumes the entire project, from functional definition, the purchasing system, commissioning and handover to production. Upon request, we integrate upstream and downstream production steps from the dryer runs to automatic palletizing to a complete production process. After handover to production, we offer multiple services to take full advantage of the system during its entire lifecycle.

Möller IntelligentFlowTM Is a state-of-the-art control system specifically developed for new and existing pressure vessel systems. It ensures continuous and precise control, ensuring your system always operates at its optimal operating point. Our algorithm continuously optimizes the pressure vessel system, achieving energy savings of up to 20 %. Wear and tear are significantly reduced due to lower conveying speeds compared to conventional systems. IntelligentFlow TM allows for the storage of an unlimited number of individual bulk material parameters, enabling the same system to convey a wide range of different bulk materials with maximum efficiency, even after decades of operation.

Continuous level measurement The plumb bob series NivoBob® NB 3300/3400 meets the requirements of many interface measurements and are very reliable due to the simple measuring principle. A 4-20mA analog signal as well as a Modbus RTU/Profibus DP interface are available for level evaluation. Level limit measurement Vibration forks of the Vibranivo® series VN 1000 or VN 5000 can be used to measure limit levels of slurries and solids in liquids. The wetted parts are made of resistant stainless steel. With the VN 1030 and VN 5030 versions, even depths of approx. 4m can be realized when installed from above in a tank or basin. The high sensitivity required for the respective solids detection can be easily set on the electronics. Continuous level measurement With the capacitive sensor NivoCapa® and the guided radar NivoGuide® NG 8000 series, UWT offers two reliable sensor families that meet all expectations of various media, which have to be measured, different requirements as well as installation positions. The capacitive measuring method perfectly suits interface measurements where an emulsion layer developed. Guided radar technology allows concurrent detection of the interface and the total level with only one sensor. The capacitive measurement method is ideal for precisely detecting or measuring the interface between two liquids or between a liquid and foam. Sensors for interface measurement must often have a correspondingly high sensitivity, a high chemical resistance and a robust construction against mechanical stress and deposits or buildup. With the capacitive sensor Capanivo® 7000 and Capanivo® 8000 series and the RFnivo® 8000 series, cable or rod sensor versions.

IP67 Rated Moisture Sensor used for applications or conditions with high heat, wash downs, and harsh chemicals. MoistTech's near-infrared technology enables precise, continuous moisture and coating analysis across a wide range of products and raw materials. This instant and continuous measurement capability not only enhances product quality but also boosts productivity and energy efficiency, ultimately leading to reduced operational costs. One of the key advantages of the IR3000 series is its unparalleled accuracy and reliability. These sensors deliver true, repeatable results year after year with minimal maintenance.