The Liebherr P78-HR sensor in conjunction with the Liebherr Litronic-FMS 3K / CCS type coating thickness and basis weight determination system has become indispensable for many industrial processes. The areas of use include the coating of paper, box, film, non-woven and textile webs. The sensor installations take place, for example, before and after the squeegee for the exact determination of the coating or the humidity The Litronic-FMS 3K evaluation and transfer unit, which is a mandatory part of the system, is used to record, process and prepare the values measured by the sensors. The integrated software is used for convenient parametrisation and calibration. Thanks to the various interfaces, signal transmission to the higher-level control is feasible. Measurement by the Liebherr sensor system is based on the physical principle of capacitance determination in the high-frequency stray field. In addition to their high precision and robustness, the measuring devices from Bad Schussenried are characterised by their reproducibility. Once the sensor has been calibrated, further measuring points can be set up or devices renewed on this basis at any time without great effort. The plant thus always remains reliable, regardless of its previous term and age.

Our moisture measurement system FMS II is installed successfully in different industry fields for the determination of the moisture/water content of many different kind of materials (e.g.: powder and bulks, sand, granules, pellets... oil, diesel, coolant, sludge... ). The sensor could be installed on conveyor belts, in material chutes, silo outlets, dryers as well as in tanks and pipes and many other installation places. The moisture measurement system has been developed and made by our company especially to improve quality and to ensure a high-grade quality standard. With just one calibration of the sensor according to the local data and conditions we guarantee exact and replicable results.

Lift and tip stations by HUMBERT & POL optimize procedures during manufacture. Containers need to be lifted, lowered or tipped. Lift stations distribute cases, stackable bins or pallets to various floors or lift them to the desired height. Lowerator stations are used, for example, in operator friendly workplaces. With tip stations almost all bulk products can be emptied from any style of container.

Customised Dimensions KLT, cardboard box customised to customer specifications. Moving distance up to 2,000 mm Permissible weight load weight on mounted conveyor 50 kg Driving speed 0.4 m/s Connectable horizontal storage in up to 6 levels Selection from predefined programme sequences

Ambelt® light duty conveyor belts are generally used for short to medium transportation distances and allow transportation of bulk and pieces also in narrow production areas, e. g. in the food industry or in logistic centres. We offer you a solution for almost every application area. The product portfolio complies light conveyor belts made of PU, PVC and other material. According to your requirements with cleats and sidewalls – with or without textile layers as well as for oil resistant and FDA applications. Application areas: - Glass industry - Wood industry - Food industry - Logistic centres and parcel services - Recycling industry - Brick factories - Sugar industry

The CPM-100 handles labelling and signage requirements for Health & Safety, engineering, electrical, plant ID, product ID, pipe marking, admin, chemical ID, facilities management, control panels and more. => On-demand custom labels => Multi-colour printing => Cut labels to any shape required => Print barcodes & variable data => Print your own logos, diagrams and schematics The Lighthouse for MAX CPM-100 software clip art includes more than 3,800 symbols. Using thermal technology, gives vibrant, robust, UV stable, chemical resistant, water-proof signs and labels, which are instantly ready for outdoor use. With simple operation and no odours or inks to contend with, this is a true 'walk up and use' system.

The Lighthouse CPM-200 handles labelling and signage requirements for Health & Safety, engineering, electrical, plant ID, product ID, pipe marking, admin, chemical ID, facilities management, control panels and more. => Unique 200mm wide print & cut facility. => Up to 1.5m print length per label. => Multi-colour (spot & CMYK process) printing. => Professional 300dpi print quality. => Cut labels to any shape required. => Print barcodes & variable data. => Print your own logos, diagrams and schematics. The Lighthouse for MAX CPM-200 software clip art includes more than 3,800 symbols. With its increased size, the CPM-200 has opened up the opportunity to handle requirements for larger signage, as well as labelling applications traditionally handled by other models. As with all our systems, you can design and print exactly what you want, when you want it. The output is strong and robust meaning the Lighthouse CPM-200 can handle all kinds of applications, from signs and labels for education, retail and emergency services, right through to the most demanding uses in engineering, pipe marking and chemical ID.

The purpose of briquetting quicklime and dolomite (or dolomite) is to improve their use in industrial processes. Quicklime, which is highly reactive in powder form, is difficult to handle as it is. Briquetting enables it to be transformed into compact blocks, reducing the risks associated with dust while making it easier to transport, store and dose. Dolomite, a double carbonate of calcium and magnesium, follows the same principle: in briquetted form, it is more stable and suited to high temperatures, particularly in the steel industry. These briquettes guarantee better mechanical strength and controlled reactivity in furnaces. Here is a video of our briquettes : https://www.linkedin.com/posts/euragglo-sas_briquetting-agglomeration-limeprocessing-activity-7343611685858910209-8jXF?utm_source=share&utm_medium=member_desktop&rcm=ACoAAEZ8-CwBV6DBIGjCDUXBB5e_571d3ZL5ouU

* Abriebfestes Verschleißgummi * Abrieb < 70mm³ * Rot, Shore Härte ± 38° * Reißfestigkeit 240 Kilo/cm2 * Reißdehnung 810 % * Spezifisches Gewicht 0,98

Ganter is repositioning itself for linear actuator connectors and will soon beoffering connectors with individual specifications. The real-time online configurator makes this possible. Linear actuator connectors have more different parameters than Ganter‘s Standard Parts strategy could cover — until now. The market leader in standard parts is now presenting a completely new concept that combines the benefits of Standard Parts with a wide range of customization options. This customer-centric strategy is made possible by the new online configurator, which can be used to specify the central parameters of a linear actuator connector and output them in real time. The online configurator offers several advantages over the previous standard offering. In addition to the customizability, it makes the ordering process more efficient because the system immediately checks the selection for plausibility and indicates weight, price and delivery time in real time. The latter takes slightly longer than when ordering standard linear actuator connector, but the ability to enter individual specifications should outweigh this by far. Simultaneous transfer of options into 3D data sets enables the customer to immediately check whether the selected configuration fits into one‘s own design. This aspect is all the more valuable for time-critical tasks. More information on Ganter standard parts can be found on the internet at www.ganternorm.com

The Screening Technology VS includes various configurations, different screen surfaces and several drives. Serving all fields of industry enables interVIB selecting the best possible combination. According to the conveying good to be graded, we propose the decision for circular or linear motion. interVIB always finds the best solution, no matter what application is asked for – grading cacao beans or pellets, dewatering rocks or screening scrap metal. Various cleaning solutions for the screening surface can be chosen. Also it is possible to grade various fractions by multi-deck screening machines. At all designs interVIB considers easy access and easy-to-clean screen surfaces. Various Screen Surfaces and Designs Dimensioning the screen surface depends on the conveying good. For example coffee beans, pellets or animal feed ingredients are graded through spring steel wire mesh screens, either square or rectangular aligned into downstream direction. For mining, recycling or rock and gravel applications grid screens, perforated steel plates or bar grate screens are a good solution. But also perforated synthetic or rubber surfaces are a feasible choice being wear resistant for the dewatering of abrasive goods. As you can see, we have many options getting the best performance possible.

JOEST Linear motion screens are high-performance machines for pre-classification, control screening, or final classification of bulk materials ranging from fine to coarse particles. Thanks to their linear motion, they can be precisely adapted to the screening behavior of different materials – whether for uniform particle size distribution, high throughput, or demanding process conditions. The machines are available with various drive concepts – from magnetic drives and unbalanced motors to exciter drives – and come in different structural designs. JOEST linear motion screens are available in many versions – as single-deck or multi-deck units, in horizontal or inclined configurations, as well as multi-slope or banana screens. All designs are easily accessible and allow for efficient cleaning; optionally available with ATEX-compliant features. Thanks to their modular design, they can be used in almost all industrial sectors – from mining & minerals, stone and earth industries, and metal & glass recycling to food and chemical production.

The Liner Connection system LAS-EC "Easy" for discharging Big Bags provides the solution by offering defined and safe handling with a logical operating sequence of only a few steps. Tailor-made to meet your discharging requirements, it enables easy, ergonomic and especially safe discharging of powder. FEATURES - Control unit with 3 buttons: - Connecting, Sealing and Disconnecting - No consumables like O-Rings - Fast change of Big Bags or liners - Side Port with endless liner system - Pneumatic and mechanical sealing - Containment up to OEB 4 - Optional WIP and CIP Equipment - Ergonomic Handling

The HECHT Liner Connection System LAS-MC “Manual Connect” is an innovative solution for the safe and dust-free discharge of FIBCs (Big Bags). The system achieves a Containment level of up to OEB 4 (1–10 µg/m³), reliably protecting operators, product, and the environment. The liner exchange process is ergonomic, fast, and requires almost no auxiliary materials such as O-rings – resulting in reduced operating costs and minimal downtime. The LAS-MC is available in two versions: Pneumatic – for automated processes with convenient control. Manual – for applications without compressed air consumption. With its robust stainless-steel design, easy handling, and seamless integration into existing discharging stations, the LAS-MC is highly versatile – suitable for use in pharmaceutical, chemical, battery, and food industries.