The SHOCK-BLOWER® reliably clears material deposits and keeps bulk solids flowing. AGRICHEMA’s SHOCK-BLOWER® system enables individual solutions for all sectors of the bulk solids industry. For over 40 years now, buildups of bulk solids have been successfully cleared with the SHOCK-BLOWER® air blast system. SHOCK-BLOWER® air blast devices store compressed air (or inert gas), then release it as needed in the manner of an explosion. SHOCK-BLOWER® air blast devices with hot-dip galvanized compressed air tanks and valve seats made from CrNi steel have been designed for a long service life and high levels of operational safety. Thanks to the unique valve technology, which pneumatically closes the piston in just milliseconds, you can save up to 50% compressed air/power. At normal temperature range SHOCK-BLOWER®s are used in transfer hoppers and chutes, dust pipes, filters, mills, sifting machines and more. At high temperature range SHOCK-BLOWER®s are used in cyclones and pipes, preheaters and heat exchangers, clinker brick chutes, grate cooler inlets, incineration plants, small-scale firing systems and lots of other places. The POWER PACK system for the SHOCK-BLOWER® is intended for use when space for installing and servicing multiple SHOCK-BLOWER® units is very tight. The POWER PACK station with 1 compressed air tank and up to 8 external valve units can be installed in easily accessible places. The exhaust points are connected via appropriate pipes, enabling air to be blasted from several meters’ distance. The strength of the air blasts is not appreciably reduced by the extra distance.

- hard-facing service with martensitic flux-cored wire electrode

Application areas: The MAHR shut-off valves: Uncomplicated, robust components for many different operating conditions. Shut-off valve with one flange (F1): Everywhere where flexible connection is required. A rubber or cloth sleeve (or similar) connects to the downstream element. Typical example: Between silo and weigher, sieve machines etc. Shut-off valve with two flanges (F2): Everywhere where positive connection to the downstream element is necessary. Typical example: Between silo and screw, rotary feeder etc. Three actuation types can be selected for both base units: a. Electropneumatic drive b. Gear motor drive c. Manual operation Material / design: Valve body: die cast aluminium Valve disk: material grey cast iron with neoprene rubber coating Shaft journals: material, made of C 40, with self-lubricating plastic bushes which do not come into contact with the product F1: flange on one side + sleeve nozzle F2: flange on both sides a. Electropneumatic drive: EP 80 - EP 100 - EP 125 = piston diameter b. Gear motor drive: Gear motor: Size GM2: 0.55 kW Gear motor: Size GM2: 0.75 kW c. Manual operation: H2: Hand lever 300 mm long H3: Hand lever 500 mm long Technical data: Dust-tight: alternatively pressure-tight up to 0.2 bar Sealing ring: nitrile rubber (NBR black), temperature-resistant from -30 °C to +130 °C, not suitable for food Advantages: Physical: very resistant to oils, heat and ageing Mechanical: flexible, hardly deformable, very low gas permeability Chemical: resistant to mineral oils, hydrocarbonates, water, steam, gas and vegetable oils In the case of changing the operating process, it is possible at any time to change the shut-off valves to a different type of actuation

FTK Förderband Technik Kilian GmbH Produkte werden weltweit zur Überwachung von Förderbandanlagen und Becherwerken für Schüttgüter eingesetzt. Das Produktprogramm wurde für die rauen Einsatzbedingungen in der Grundstoffindustrie wie zum Beispiel im Erztagebau und der Eisen- und Stahlindustrie entwickelt. Wo es auf Verlässlichkeit und Qualität ankommt.

Ex zone 1 and 21 Thermoplastic enclosure Suitable for the food processing industry Long life Reed contacts, coded Actuation from front Switching distance up to 6 mm With pre-wired cable Special version only for gas Ex zone 2 and dust Ex zone 22 available

Die Wiederbespannung von runden und rechteckigen Rahmen für alle Siebmaschinentypen kann mit verschiedenen Klebstofftypen geschehen

Synthetic fabrics and extruded nettings • Materials include polyamide, polyester, polypropylene, PEEK, PPS and fluoroplastic • Many fabrics suitable for foodstuffs as per EU 10/2011 • Antistatic fabrics in various designs • All fabrics supplied in rolls or cut to parts as required • Extruded nettings made of various materials and supplied in tubes or rolls

ILCHMANN slide gates are used for the safe isolation and controlled dosing of dry, free-flowing bulk materials. They are primarily installed under chain conveyors and at silo discharges. Drive options include manual (handwheel or chain wheel), pneumatic, or electric actuation. The slide plate is available with an adjustable sealing system and a position indicator. Optionally, ILCHMANN slide gates can be supplied in protected designs for operation in potentially explosive atmospheres in accordance with ATEX requirements.

WEICON HT 300 adhesive and sealant is red, high-temperature resistant (+300°C/+572°F), free of solvents, strong, and has acetatecross-linking properties. It is resistant to weathering, ageing and chemicals and is extremely elastic (breaking elongation of approx. 300%). HT 300 is particularly suitable for heat-exposed bonds and seals and adheres very well to steel, aluminium, glass, ceramics and many additional materials. HT 300 can be used in industrial furnaces, flue gas systems, heating installations, exhaust gas routing, heating cabinets and in many additional areas.

WEICON Silicone LP is an acetoxy curing and permanently elastic adhesive and sealant. It is resistant to chemicals, ageing, weathering and UV radiation as well as to temperatures up to +180°C (+356°F). It adheres very well to steel, aluminum, glass, plastics and many other materials. Silicone LP was developed specially for use in sensitive areas. It can be used as sealant in the food and drinking water sector, for example in dairies, slaughterhouses, in the food and beverage production or in canteen kitchens.

Weighing bellows are for the flexible connection of mixers, feeders or vessels on weighing cells to supply lines, drain pipes or other forms of air transport or powder transport. Silicones are well known for the supple and flexible properties. These flexible connections produce little to no reactive force and therefore do not influence the weighing.

Application areas: The MAHR Silo Feeding Nozzle SE is used everywhere where delivery lines must be connected to silo bodies. The gas/dust mixture is deflected at right angles by it and introduced into the tank. Material: grey cast iron, die cast aluminium, cast steel, cast stainless steel Special features: Connecting delivery lines to silos is made easy when using this inlet nozzle. Pipeline bends with large radii are saved. The form causes a reduction of the incoming flow speed and thus low wear

Main Properties • suitable to be placed on top of a silo • jet-pulse cleaning by compressed air • bag or cartridge filter elements • available filter area from 2 m² to 60 m² • removal of the filter elements (clean gas side) from above • flip-up cover in aluminium, hinged on one side • available with lateral fan on request (0,75 ÷ 11 kW) • available diameters DN540; DN790 and DN950 • body always made of stainless steel AISI 304 and cover made of aluminum • parts in contact with the product in mild steel or stainless steel

The latest in Solimar innovations addresses concerns from industries that require an extra level of safety. Instances of Solimar fluidizer disks contaminatingproduct are extremely rare, but disks that have been mechanically damaged during bin cleaning, by extreme air pressures or improper Installation could potentially cause a problem. Designed to meet the stringent process requirements primarily of the dairy, pharmaceutical and food related industries; Solimar Pneumatics has developed the first Metal Detectable Fluidizer Disk. Your only choice when Zero contamination is a must.