Disc Mills type MK KMV are mainly used for fine grinding of rigid thermoplastic granules into powder for pipe, profile, sheet and siding production. These Disc Mills can also be used for fine grinding of other rigid plastic materials and for fine grinding of soft to medium hard, brittle and crystalline organic and inorganic materials. The Disc Mill, Type MK KMV features a number of advantages that add up to its unsurpassed performance in production. * Cool grinding operation * Continuos screen less operation * Easy adjustment of particle size possible * Hinged front door allows for good access to the grinding chamber * Easy adjustment of grinding gap * Safety switches for maximum operator protection * Steel fabricated design, rugged and reliable * Compact space saving design * Not low in initial price, but a machine with very favorable lifecycle cost

The disc screen separator serves as a protective unit for downstream equipment. With its help, coarse materials, oversized particles, and foreign objects are reliably removed from the process stream. The machine stands out due to its robust design, ensuring long service life and reliable operation even under demanding conditions. The parallel-arranged, slightly angled rotating discs provide efficient and uniform material separation. The drive unit is designed for easy access, significantly simplifying maintenance and servicing. For a process with minimal dust generation, the inlet and outlet cross-sections as well as the enclosure can be configured variably, allowing optimal adaptation to different operational requirements. The cut size can be adjusted flexibly by varying shaft spacing, using spacer sleeves, selecting different disc sizes, and easily modifying disc distances. This enables the machine to be optimally configured for different materials and separation tasks.

The BARL – discharge aids are used for emptying silos and bunkers containing powdery, fine grained and granular bulk materials with different physical properties. The discharge aid loosens the bulk material and assists the mass flow. Bridges in the vicinity of the oscillation insert are destroyed. The outer cone is securely flanged onto the container. A shut-off organ and the following conveyor organ can be flanged onto the discharge flange directly and without any problem. The oscillation insert consists of the relief taper and the paddles that extend down as far as the outlet. The relief taper protects the outlet from the pressure of the bulk material. The point projecting upwards prevents the formation of bridges in the vicinity of the oscillation insert. The agglomerate crusher is naturally also available in both pressure-shock-proof and ATEX-compliant!

The discharge station is used for dust-free emptying of the mixture into downstream processing equipment. The portable container is pushed into the discharge station and clamped. The discharge pipe flange is lifted to the container outlet via pneumatic cylinders. Options: The following options are available for the automation of the discharge station: - Pneumatic or electrical control - Pneumatic rotary cylinder for opening/closing thecontainer valve with adjustable opening angle - Knocker to assist with emptying of materials with poor flow characteristics - Product sensor for monitoring product in the discharge pipe - Interchangeable discharge pipe for faster turnaround times for color/formulation changes - External control of discharge station

The discharge station, which is built into an existing on-site steel structure, is used for dust-free emptying of the mixture into the downstream processing equipment. The container is placed onto the discharge station using a lifting device (crane or forklift). Options: The following options are available for the automation of the discharge station: - Pneumatic or electrical control - Pneumatic rotary cylinder for opening/closing thecontainer valve with adjustable opening angle - Knocker to assist with emptying of materials with poor flow characteristics - Product sensor for monitoring product in the discharge pipe - Interchangeable discharge pipe for faster turnaround times for color/formulation changes - External control of discharge station

AI-controlled DiscSpreader automove: Currently, disc spreading machines require manual adjustments when the input material is modified. To avoid this, we teamed with leading AI developers from the Technical University of Cologne and developed a solution that automatically orients the discs using Artificial Intelligence. With a camera above the conveyor, it is possible to monitor how the material is distributed. The gathered data allows the disc to adjust automatically and spread the material perfectly. Indeed, our research proved that a single disc is enough to obtain the same results

Products with very high moisture content presents a major challenge for material drying. The Allgaier Dispersion Dryer FL-T accomplishes this in one pass without product recirculation. This spray dryer is also capable of handling fine and very moist powders that disintegrate during drying and can be conveyed pneumatically. The Allgaier Dispersion Dryer is an ideal solution for industrial applications such as stone and earth, chemicals, plastics, waste/recycling, and foodstuffs, where gentle drying in a matter of seconds is required. Functionality: The Allgaier Dispersion Dryer FL-T consists of an upright, cylindrical housing divided by a perforated inflow floor. The indirect drying air enters through an inlet below the inflow floor and moves upward in a spiral motion. Moist product is fed through an inlet onto a high-speed centrifugal wheel and dispersed by the air flow. By using various air direction tools, clumpy moist products are efficiently broken up. Intensive circulation of product and drying air enables the best possible heat and mass transfer. Compared to conventional flash dryers, the Allgaier Dispersion Dryer is much more efficient. The dried product is removed from the dryer by downstream cyclones or fine dust filters. Benefits: - High Performance: Direct drying of even very moist and lumpy products without pretreatment. - Gentle Product Treatment: Very gentle drying due to direct air current flow from below. - Multiple Usage: Suitable for use as an economical pre-dryer in multi-stage drying systems. - Compact Design: Efficient, space-saving design optimizes your square foot investment costs. - Maximum Flexibility: All common heating media such as natural gas, saturated steam, hot water, electric or thermal oil as your heat source can be used. - Minimal Process Costs: High water evaporation (efficiency) and heat recovery from dryer exhaust air (fuel cost savings) contribute to overall low operating costs.

The diverter pot is used for changing direction of pneumatic delivery flows in pipelines. The diversion angle can be continuously varied from 45° - 135°. The basic version does not have an additional antiwear plate. A manganese plate can optionally be welded on. For the diversion of very abrasive bulk materials, it is recommended to select the diverter pot with replaceable antiwear plate.

Flap Diverter Valves, Diverter Valves for pneumatic Conveying, Drum-Type Diverter Valves

The DMR Flash Dryer by Hosokawa Micron is a compact, continuous drying system that combines drying, milling, and classifying in a single, energy-efficient unit. It is designed for safe and gentle drying of heat-sensitive products, including wet solids, pastes, slurries, and filter cakes, producing fine, uniform powders in seconds. Even challenging materials are processed efficiently thanks to the integrated high-shear rotor, which ensures rapid drying, effective deagglomeration, and precise particle size control. By combining multiple process steps, the DMR simplifies operations, reduces energy consumption, and lowers overall operating costs. The system can handle moist solids with up to 80 percent moisture content and delivers high evaporation rates with fast thermal transfer. It has a small footprint and excellent accessibility for inspection and cleaning, making it ideal for continuous production in industries such as chemicals, food, pharmaceuticals, and minerals.

The docking device type NW 200 is used for loading of small containers with dry, free flowing bulk solids. Like all loading systems developed by Stanelle the NW 200 is characterized by reliability, precision and high durability.