The ILCHMANN horizontal cooler chain conveyor is designed for the controlled cooling of press cake, pellets, and comparable bulk materials. It is used wherever uniform cooling performance, gentle product handling, and space-efficient integration into existing plants are required.

- The HOSCH conveyor belt sealing system Type FD consists of a robust sealing board made of stainless steel, equipped with sealing blocks juxtaposed in a row and fixed by means of a clamp. - The sealing board is also available in galvanized execution. - The sealing blocks are made of an abrasion-resistant rubber compound. They are easy to install and allow for smooth and individual adjustment against the belt. - The edges of the sealing blocks must be in light contact with the belt surface to offer maximum sealing efficiency with minimum wear. - In the event that the sealing efficiency decreases, each block can be readjusted individually. - HOSCH conveyor belt sealing systems Type FD can be juxtaposed without limitation so as to seal the complete loading zone of the belt conveyor. It is recommended either to bolt or to weld the sealing boards directly to the chute walls or to bracket off the structural framework. - The sealing blocks can be changed and/or re-adjusted with a minimum of efforts. For simple and smooth adjustment, a special HOSCH spanner is available. - For a better tightness in the corner areas, longer sealing blocks are available. These blocks can be cut to size during installation.

- position holder - for easy maintenance and adjustment of the necessary preload - one-sided tensioning device for smaller belt widths - double-sided tensioning device for higher dynamic forces or wide conveyor belts - fixed stop when the wear limit is reached leads to more plant safety - safe evasion - wear indicator to support maintenance planning

- exceptionally long service life due to high-quality carbide scraper edges - two-stage spring-damper system to ensure safe evasion - special dampers with a high spring rate calm the vibrations that occur during the swerving movement - user-friendly and compact design - simple handling during installation and maintenance - integrated offset profiles serve to improve the evasive movement (lever arm)

- double deflection function of blades and modules (deflection, see detailed view) - low maintenance due to automatic re-adjustment of contact pressure - conveyor belt safety due to an internal stop when the wear limit is reached - the durable modules, as well as the carbide-tipped blades, can be replaced separately - defined preload within the module - exceptionally long lifetime due to carbide scraper edges - mounting with a horizontal adjustment option - time-saving maintenance due to simple fastening of modules and blades

THE HOSCH DIFFERENCE. Permanent contact of the scraper edge to the conveyor belt, long service life due to the selection of the best materials, and research and development work at the highest level. The functionality of HOSCH products has many faces. The flexible HOSCH modular system allows a variety of individual solutions tailored to your plant. Consultations, installations and maintenance are carried out by the experienced HOSCH Customer and Service Team. In this way, we guarantee you maximum performance over a long period of time. We offer you this “ALL-ROUND CAREFREE PACKAGE” worldwide.

- long service life due to carbide scraper edges - tool-free patented module change with Plug & Scrape - fast deinstallation of assembly carrier (patent application) - overlapping modules for gapless cleaning - suited to smaller belts - no tensioning is required during the complete lifespan of modules

- different cleaning blades ensure versatile application possibilities in all areas (see optional accessories) - skirts mounted on the blades deflect the material forward and feed it into the material flow. This is particularly advantageous in tight transfer situations - also available as OEM configuration - variable adjustability - automatic self-adjustment - compact design for low space requirements - after consultation with HOSCH, also available in special sizes and individual designs

- designed for all belts in the range from 300 to 1,000 mm - low profile space requirement for the installation area thanks to its compact design - both the C1® and C1®-V can be mounted in the lower belt area and on the drum - optional rigid or spring mounting - two-part design of the module wear components guarantee reduced spare parts costs

- designed for conveyor belts in the range from 600 to 3,200 mm - can also be used at extreme belt speeds - reliable material flow prevents material jams even at high speeds - absorption of all dynamic forces by the module ensures constant belt contact - three-dimensional adaptation of the modules to the belt surface

- very robust scraper, suitable for use on wide belt conveyors with high belt speeds and conveying volumes - special designs available for applications with medium belt widths - the extended pulling stability of the modules guarantees the necessary smooth running operation, even with high-speed conveyor belts - special carbide thicknesses to counteract the higher wear speeds caused by the equipment - heavy duty design of the spring modules compensates for the strong vibration and belt forces - sophisticated pretensioning mechanism makes the heavy-duty design user-friendly

- main scraper for use on the drum with the typical HOSCH cleaning performance - used as a powerful pre-scraper or sole main scraper in tight chutes - the modules of the CT are designed to withstand the increased dynamic loads on the drum - the angular arrangement of the two rows of modules relative to each other enables optimum adaptation to the drum

- uniform cleaning performance over the entire belt width due to a defined pretensioning of the modules - the high pulling stability guarantees smooth running and avoids material buildup on the system support - using the adjustment scale, each module is provided with the correct pretension and adapted to the belt contour - accelerated maintenance process due to reproducible adjustment of the scraper by means of the optional adjustment ring - the single-row, overlapping arrangement of the modules enables gap-free cleaning and simplifies installation - wear limit control through fixed end position guarantees maximum safety for your conveyor belt

- installation in the straight lower belt of the conveyor system - special design for unrestricted normal operation - suitable for heavy operating conditions - easy adaptation to the existing scaffold structure - highly wear-resistant, antistatic and flame-retardant plastic coverings of the rollers (ATEX suitability) - robust, torsion-resistant steel construction for heavy operating conditions - roller crossbeam with sealed roller bearings guarantees smooth and fast response to belt misalignment - simple and fast assembly due to modular design - high-quality, maintenance-free single rollers with special sealing and rolling bearing units

- external centre bearing block fitted with high-quality radial and axial roller bearings - heavy-duty assembly carrier with telescopic end sections for flexible adaptation to the conveyor structure - roller crossbeam suitable for various belt widths and fitted with a swing angle limiter - rubberized segment rollers with rolling bearings for insertion into the roller crossbeam - basically maintenance-free