It may be the drive solution in various conveyors used for heavy load transfer where movement is to be directed at 90°.

With its compact body and easy mounting advantages, PGR Drive Technologies provides solutions up to 8600 Nm moment with its A/F series released to the market.

These series which are provided in foot- (PA) and flange (PF) mounted options serve up in drive systems that need a wide reduction ratio and a maximum of 26900 Nm of output moment.

Helicalgeaer size 17 up to 167 Torque 18000Nm max

PGR Drive Technologies provides solutions with PSH series products for driving and positioning carriage platforms.

Helical-wormgeared motors size 37 up to 97 Torque up to 4000 Nm

Ambelt® is international sales partner (for Germany, Austria, Switzerland and Eastern Europe) for Helmitin® bonding systems, steel primer and cleaner. Ambelt® offers the entire product family of Helmitin® cold bonding systems; e.g. Helmitin® 14030. This adhesive system is an absolute highlight as the applied solvent is non-flammable but nevertheless trichloroethylene- free.

The proven HELOS laser diffraction series – with its classical parallel beam laser diffraction set-up – offers a powerful technology for reliable particle size distribution analysis of powders, granules, suspensions, emulsions, sprays and numerous other particulate systems. A size range from below 0.1 µm to 8,750 µm is mastered. In the early 1980s, Sympatec introduced a breakthrough innovation which was leading laser diffraction to another dimension: dry powder dispersion for even the finest, cohesive powders came true with RODOS. And with the R series of our laser diffraction sensor HELOS new benchmarks for precision and accuracy have been achieved. Latest improvements comprise enhanced application of parameter-free Fraunhofer evaluation down to the submicron regime (below 1 µm), the greatest measuring signal frequency for best resolution with range combination technology and more powerful evaluation modes (Fraunhofer & Mie). The modular HELOS system design together with a great variety of dispersing and dosing units provides a flexible adaptation to the most diverse industrial and research applications: Dry Applications » RODOS | injection disperser for finest, even cohesive dry powders | 0.1 µm to 3,500 µm » GRADIS | gravity disperser for coarser, even fragile dry particulate systems | 0.5 µm to 8,750 µm Wet applications » SUCELL | wet disperser for emulsions and suspensions | 0.1 µm to 1,750 µm » QUIXEL | wet disperser for emulsions and suspensions, even with coarser particles | 0.1 µm to 3,500 µm Specialties » OASIS | combined dry and wet disperser, consisting of RODOS & SUCELL » SPRAYER | adapter for the analysis of aerosol clouds released by nasal and pharyngeal pump sprays | 0.25 µm to 1,750 µm » INHALER | vacuum controlled adapter for the analysis of aerosols released by DPIs, MDIs, nebulizers, pump sprays or sprays with propellants | 0.25 µm to 1,750 µm

The patented Herding BETA provides proven Herding technology now for numerous applications in temperature ranges of up to 160°C. Due to the reliable separation, even of finest particles, only a very low residual dust concentration of < 0.5 mg/Am³ remains after filtration. The Herding BETA is a dust Ex zone barrier according to VDI 2263 and has a high chemical and remarkable pH resistance (1-10). Sterilization is possible without any problems. The filter elements are tested at a hundred percent rate and stand out due to the effective product separation on the surface - pure surface filtration with constant operation conditions.

Herding® FLEXPRO – the New Filter System Proven Herding Technology in a New Dimension With FLEXPRO, Herding presents an innovative new filtration system that sets new standards in energy efficiency, operational safety, and digital integration. Developed for demanding industrial applications, it combines proven technology with forward-looking engineering – offering a solution that flexibly adapts to a wide range of production conditions. At its core is the further development of the well-known Sinter-Plate Filter technology, enhanced by the newly designed Herding® PRO filter element. This combination enables powerful, sustainable, and economically attractive filtration – without compromising on separation performance or system availability. - Up to 25% lower CO2-Footprint - Digital Twin / OPC UA ready - Plug & Play / User-friendly handling - Cost reduction through optimized energy use - Durable / Long service life - Constant operating conditions - Pure recovery without contamination - Clean air and pure gas due to lowest clean gas values The new Herding® FLEXPRO Filter System combines proven Sinter-Plate Filter technology with an intelligent system architecture and modular design. It offers maximum adaptability, sustainably reduces energy and operating costs, and at the same time ensures the highest level of operational reliability – even in sensitive production environments. Additionally, the Filter System features innovative dust-discharge, easy one-sided operation, and convenient removal of the dust-discharge with a pallet truck.

Innovation that pays off – Herding PHI With the new Herding® PHI filter element, Herding sets new benchmarks in filtration technology, offering a replacement solution for conventional bag filter systems that is superior, both economically and technologically. As the ideal alternative, Herding® PHI combines all proven advantages of the Herding® Sinter-Plate Filters with exceptionally short amortization times and maximum operational reliability. The significant reduction in waste, thanks to remarkably long service life, substantially lowers disposal costs. Herding® PHI covers a wide range of applications at temperatures up to 100 °C and ensures reliable separation of even the finest particles, achieving clean gas values of < 0.5 mg/Bm³. Its compact design provides four times the filter area compared to bag filters of the same size.

The Herding MAXX series offers all the proven benefits of pure surface filtration with Herding sinter-plate filters for use in large volume flows. The large filter units’ upper section can be designed either as a walk-in clean gas compartment or as a simple housing cover with access to the clean gas compartment. The connection to the clean gas duct is possible via a single interface. The jet pulse unit is located outside of the filter unit to make maintenance and revision works of the entire cleaning system possible during operation without shutting down the filtration system. The actual dust particle separation is achieved via the patented Herding® sinter-plate filters by pure surface filtration on a rigid-body basis. Assembly of the filter elements is performed from the clean gas side. The modular concept allows the most effective use of space during transport and delivery, as well as high flexibility in plant construction. Depending on the existing site conditions, the bolted construction concept offers several alternatives from basic components to large, pre-installed assemblies. Due to significantly lower requirements for cranes and scaffolding, installation times are reduced up to 30% compared to conventional filtration systems. DESIGN FEATURES »Pure surface filtration on a rigid-body filter basis »Maximum flexibility in delivery and installation through modular design »Highly efficient cleaning system with low energy optimized compressed air consumption »Compact modular design »Integration of raw and clean gas ducts using only one interface each »Operating flow rates up to 1,000,000 Am³/h and more Herding MAXX filter units with the Herding® sinter-plate filters are generally suitable for the filtration and product recovery of fine, abrasive and adhesive dusts or for dusts with agglomerating tendencies. The Herding MAXX series is perfectly conceived for large product quantities with flow rates up to 1,000,000 Am³/h and more.

With the Herding® FLEX series, all proven advantages of pure surface filtration with the Herding® Sinter-Plate Filters are implemented in a compact and space-saving manner. The filter unit series is extremely flexible for volume flows of approx. 500 m³/h up to several 100,000 m³/h. The filter units of the FLEX-series are equipped with vertically installed Sinter-Plate Filters. Depending on the requirements, Herding® DELTA, DELTA² or HSL filter elements are being used. Unit safety and performance according to the current ATEX- guidelines are coordinated with the unit operator, if required. APPLICATIONS Herding® FLEX filter is particularly suitable for separation or product recovery of very fine, sticky or abrasive dusts. PRODUCT FEATURES o Constant operating conditions by surface filtration o Highly efficient cleaning system at a low and energy-saving consumption of compressed air o Maintenance doors as displacers with extremely stable stiffening - no escaping of dust o Separate valve compartments for the inspection of the dedusting-system during operation o Project-specific design of the dust discharge o Flow guidance for energy optimization, effective pre-separation and sedimentation o Access to all relevant components from the front side o Due to the modular design, operating volume flow rates can be up to several 100,000 m3/h

HERDING OMIKRON – FREELY ADAPTABLE The new Herding® OMIKRON element is a washable and sterilizable unibody filter element made of polyethylene. It is food-grade according to FDA and European directives and future-proof, PFAS-free. The unique feature is that the geometry and connection of the sintered rigid filter are freely adaptable. Thanks to its parametric design, Herding® OMIKRON can be precisely configured for any application and thus integrated into existing system concepts. This allows for maximum flexibility and pure productivity! - Washable and sterilizable up to 121°C - Compact unibody design - Chemical and hydrolysis resistant - Energy efficiency due to low cleaning pressure - Food compliant (according to FDA and European directives) - Durable - Long service life - Product recovery without contamination - Constant operating conditions

The Herding® Sinter-Plate Filter is the heart of Herding® filter technology. The rigid base body of the filter elements is made of sintered polyethylene. The effective product separation on the surface - pure surface filtration - is achieved by a filter-active coating. This is homogeneously embedded in the pores of the PE base body and defines its surface. The coating is therefore not a sensitive membrane, but a microporous and hydrophobic coating. The filter element is a PFAS-free version and therefore stands for: - Future-proof: Regulatory conformity with regard to the worldwide and upcoming restrictions or bans on PFAS (per- and polyfluorinated alkyl substances, such as PTFE) - Protection of people and the environment - Sustainability With the help of these technical unique selling points, the robust Herding rigid body filters achieve extremely long guaranteed service lives (avoiding downtimes due to regular compressed air cleaning) and clean gas values well below 0.1 mg/Bm³. Herding® filter technology with the sintered plate filter based on pure surface filtration not only protects people, machines and the environment, but also enables absolutely constant operating conditions and optimal laminar flow conditions. Energy-efficient recirculation operation is therefore also possible with alveolar fine dust.