4B's Milli-Temp, a loop powered analogue sensor with a 4-20 mA linear output that is scaled across a temperature range for continuous temperature monitoring - is now also available as an ATEX-certified version. The Milli-Temp series can be used on any application where bearing temperature monitoring is needed. The sensor has been designed to allow the depth of the probe to be adjustable depending on the application. This adjustability allows the tip of the probe to be placed in the optimal position for monitoring bearing temperature and also enables verification using the 4B ADB Tester. The sensor screws directly into the bearing housing using the threads of the existing grease zerk. The body of the Milli-Temp has an integrated zerk, allowing lubrication of the bearing without the need to remove the sensor. The sensors are supplied with a 3m cable. The connections are not polarity sensitive therefore special connection requirements are eliminated, and the cable can be extended in the field. Product Highlights • One Body Design - provides a 4-20 mA output provided directly from the sensor, eliminating the need for an external transmitter • Rated to -40 Degrees • Small Probe Diameter Allows Easy Grease Flow • Probe lengths 50mm, 75mm, 100mm, 150mm, 200mm • Approved for explosive atmospheres: • ATEX and IECEx Zones 20, 21 & 22 for dust

Our presses are designed to handle a wide range of materials: wood, steel, glass wool, rock wool, chemicals, coal, salt, fertilizers, etc.

The tech startup Mineral Waste Manager GmbH has entered the market with its product of the same name to make the mineral waste industry fit for the future. By developing and providing an AI-based solution, it helps all market participants to make the processing processes for the disposal of mineral waste more efficient. The specific goal: the fastest possible, professional treatment of mineral waste using the optimal disposal route. The Mineral Waste Manager is the first digital and AI-based solution to support order processing for the disposal of mineral waste. The web application assists in the evaluation of mineral waste, the preparation of offers and the selection of the best disposal routes. With a list of more than 250 sets of rules and country constellations, the software is perhaps the largest and most complete compendium of waste regulations nationwide and thus the end-to-end solution for digitizing the treatment of mineral waste. Through digital and automated report analysis, the Mineral Waste Manager ensures simple and efficient order processing, even for complicated or confusing reports: Test reports are uploaded to the web application, which are read out using artificial intelligence and make a precise determination of the waste code and pollution class. The interfaces to well-known partner laboratories (e.g. GBA, Agrolab, Wessling) ensure that the corresponding values are verified directly by the laboratory. The software also ensures that the result takes into account the latest regulations and the various federal states' rules, thus ensuring error-free classification and penalty-free disposal. The Mineral Waste Manager also facilitates collaboration between colleagues in the company through fast, simple communication, uniform formats and other features.

Our mini filters are the solution to your problem. They are used, for example, to filter the displacement air of a differential dosing scale. There is often little space for a dedusting filter here. However, the displaced air must be able to escape unimpeded and filtered so that a correct weighing result can be delivered. Our mini filters allow the process air to escape without any problems. The filter element is regenerated from time to time by compressed air pulses. The mini filters are compact in design and can be inserted into a container with the filter cartridge or attached with an extra pipe. A small integrated valve tank supplies the filter with compressed air, allowing the filter cartridge to be continuously regenerated. For filtering suspended solids, a polyester filter medium of filter class H13 can be selected. Naturally, it is conductive and suitable for use in explosive atmospheres. The mini filters are attached using a clamp connection, allowing the filter cartridge to be replaced without tools. Two sizes are available: The filter module with a diameter of 160 mm and a housing height of 130 mm including the solenoid valve is attached with a DN125 Tri Clamp® connection. The two-way-filter with a diameter of 100 mm and a housing height of 160 mm including solenoid valve is attached with a DN65 Tri Clamp® connection. The mini filters are designed for pressures up to 12 bar and are suitable for use as pressure shock-resistant protection in potentially explosive areas of dust zone 20 with a suitable clamping connection. With our filter control unit, the solenoid valve can be controlled for the regeneration of the filter surface, and the pressure difference before and after the filter can be monitored. In highly sensitive areas such as the chemical and pharmaceutical industries, our minis can ensure maximum process safety as additional police filters. Optionally they are expandable by activated carbon (e. g. for filtering aromatics).

Kiepe Conveyor Belt Misalignment Switches are used in conveyor installations for monitoring the true running of conveyor belts. The switches, when mounted at the running edges of a conveyor belt, will be operated if the belt deviates from it's designed running line by more than a permissible distance. The switches will then stop the conveyor drive, avoiding spillage of material or damage the plant.

PUCEST®mixing instruments … for almost every mixer, in almost every position Common problems with pan-type mixer: - insufficient mix results - long phase of emptying - material residues stay in the mixer - long mixing time/ longer charging time of transport - redundant mixing time wastes energy/current Pan-type mixer problems „ blading“ - every set of mixing instruments requires many different models of blades and parts (depending on producer, mixer type and model year, these parts also differ from each with type, fixing, function, wear performance) - often wrong blades can be installed - provisioning/ inventory control for many different parts requires costs and is expensive. - wrong ordering of blades, the mixture is turned more like „carrousel“, as it is mixed up The solution: PUCEST® mixing instruments Successfully retooled mixers to PUCEST® mixing instruments with right blade ordering. The mixing problem issues were solved. The mixture is mixed only in one direction. Emptying and mixing time is shorted.

The MIXACO charging station is used for dust free filling of the mixing container with raw materials. In conjunction with a bottom weighing scale or dosing systems, a fully automatic, a semi-automatic or manual charging of the container can be carried out

The container mover allows mixing containers to be transported quickly and easily. The mover is moved backward and forward by a high-performance electric drive. The mover can be used with all container sizes, from CM 300 to CM 2000. The battery charger is included in the scope of delivery. The advantages at a glance - Forward and backward movements of the container that do not strain the head due to heavy-duty electric drive - Simple handling - Handle with height adjustment - Adjustable speed - Self-engaging coupling for quick coupling and decoupling without tools

Horizontal and vertical mixers for food and non-food areas

Mixer controls with individual process including CIP and logging (TIA | WINCC | PCS7 | WAGO | SIEMENS | BECKHOFF | ROCKWELL ALLEN BRADLEY)

• Various batch mixers for mixing bulk goods • Double cone mixers for the gentle mixing of especially shear-sensitive products • Mixing under an inert atmosphere • Mixing with the aid of knife heads that can be engaged as required • Mixing with the additional injecting of liquids

Very gentle vacuum-drying at fast reaction rate for dry, moist and viscous materials at variable filling levels The spiral mixing blade initiates a three-dimensional flow of the mixing goods; creating a spiral upward movement on the periphery and downward flow in the centre. The reactor is vacuum and pressure tight and heatable by steam, thermal oil or water. Fully temperature controlled: the mixing vessel, the mixing arms, the spiral blade. The mixer can be designed to conform with FDA standards to be used as a sterile mixer and reactor which also meets EHEDG requirements and the 3a-sanitary standards.

KÖLLEMANN Mixing-Screws have their field of application within the mixing of dusty, grainy and free flowing bulk-solids. With their very high mixing- intensity, the KÖLLEMANN Mixing-Screws can even stir injected fluids like sodium-silicate, acids and leach or other additives in a process-reliable quality into the bulk-solid. Many of the applications require an abrasion-protection to ensure that the service-life of the products will stay on the familiar high level. To ensure this, different methods have been proven by decades of usage, such as hardfacing, self-shielding by means of forced sedimentation as well as a full surface rubber-coating. To embrace the requirements for volume-flow and mixing-behavior, our portfolio offers layouts in multi-shaft-design. Since adjustable mixing quality is required in some circumstances, our Mixing-Screws are equipped with optional adjustable mixing-blades.

First-class products can only be manufactured if the raw material and the product mixture are homogenous. With various mixing variants: 1. Single screw mixer as batch mixers - Highest mixing quality within the shortest mixing time - Charging and mixing in a single process step - Very gentle mixing - Mixing trough with virtually no dead space - Energy-efficient mixing - Batch mixing with simultaneous additional processes such as: heating/cooling, drying, moistening, deagglomeration/crushing 2. Continuous mixers: - Continuous and, if desired, gas-tight closed mixing process - Mixing, transporting and moistening in a single process step - Separate drives for inner and outer mixing spirals ensure an optimal mixing process - Maximum throughput capacity - Low space requirement 3. Double paddle mixing screws: - Continuous mixing and increasing conveying - Overlapping mixing paddles ensure highly effective mixing results - Simultaneous mixing, heating, cooling or drying - Easily accessible and cleanable mixing trough

TURN TRASH INTO CASH. JUST DO IT SMART. With the Methor, Doppstadt takes a new approach. As a universal shredding system for smaller quantities and frequently changing applications, it is designed and geared to handle a wide variety of waste fractions, such as commercial waste, construction waste, mattresses, bio waste as well as waste wood or green waste. At the same time, it includes all the advantages of our larger series, offering the uncompromising quality of Doppstadt’s high-performance technology.