SPLICE-WATCH Benefit from the WAGENER software for documenting and logging your conveyor belt connection. Download our flyer and discover the advantages of WAGENER Vulcanizers SPLICE-WATCH.

Application: Chute designed to properly direct the stream of transported material within the transfer station, equipped with a replaceable wear-resistant liner. This version is mounted to the discharge head of the conveyor boom and allows positional adjustment in three planes.

A defined amount of product is taken out of the vertical product flow and poured into the outlet. A collecting vessel or plastic bag is filled at the end of the outlet. A special sealing protects the guiding of the longitudinal and rotary movement against the product. The movement is performed manually (pulling and rotating) or by means of a pneumatic actuator. Sealed-off product tube The sampler does not extend into the product flow between the samples The sampling system can be easily disassembled and cleaned.

Remapur protects the material against both abrasive and impact wear and thus extends the service life of the system components.

Sprockets are with or without teeth (return sprockets) and wear-resistant due to the hardening on the teeth. These sprockets have a symetrical hub and are divisible, making them easy to (dis) assemble. The following versions are available ex stock.

SSP / Alfa Lavak Rotary Lobe Pump OptiLobe for when simple is best.

SSP / Alfa Laval Rotary Lobe Pump Series S for all applications.

SSP Pumps / Alfa Laval offers the broadest range of rotary lobe pumps for consulting-intensive applications. Handling from low to high viscosity pumped media the characteristics smooth, low shear pumping action is ideal for delicate media and where organic solids in suspension, creams, froths, gels, emulsions and mixtures to be pumped. For over 60 years these pumps are used in hygiene and industrial applications.

Tragrollen aus Stahl Pulverbeschichtet rot in verschiedenen Abmessungen z.B Durchmesser 89 mm Mantellänge 250 mm Achse 20 mm SW 15 Lagerware

Stainless steel branch pipes / T-pieces • 30°, 45°, 90° degrees (standard) • material no. AISI 304 / 1.4301 or aluminium • outer diameter: 38.0 to 154.0 mm Custom-made products possible at short notice

HS Umformtechnik is your reliable partner for the production of thin-walled pipe bends with large bending radii, especially those used in pneumatic conveyors. Our products are cold-bent without wrinkles on state-of-the-art CNC mandrel bending machines. On request we can produce extension pipe bends according to your specific requirements. Besides our standard range of stock products in stainless steel, we also process aluminium. • Leg extension each side • Extremely low ovality • Visually aesthetic surface • No start-up bulges • No scratching or scoring on the products • Deburred ends • Outer diameters from 38.0 - 206.0 mm • Radii of 500 mm / 800 mm / 1,000 mm / 1,200 mm / 1,500 mm • Wall thicknesses of 1.5 mm / 2.0 mm For use in clean air pipe systems, pipe bends with small bending radii are the ideal alter- native to type 3 pipe bends with welded-on leg extensions.

HS Umformtechnik is your reliable partner for the production of thin-walled pipe bends with large bending radii, especially those used in pneumatic conveyors. Our products are cold-bent without wrinkles on state-of-the-art CNC mandrel bending machines. On request we can produce extension pipe bends according to your specific requirements. Besides our standard range of stock products in stainless steel, we also process aluminium. • Leg extension each side • Extremely low ovality • Visually aesthetic surface • No start-up bulges • No scratching or scoring on the products • Deburred ends • Outer diameters from 38.0 - 206.0 mm • Radii of 500 / 800 / 1,000 / 1,200 / 1,500 mm • Wall thicknesses of 1.5 mm / 2.0 mm ad thicker on request. For use in clean air pipe systems, pipe bends with small bending radii are the ideal alter- native to type 3 pipe bends with welded-on leg extensions.

If you want to protect sensitive technology from wind and weather, a stand-alone silo is just the ticket. By extending the sheet steel cylinder to the floor, plant components can not only be protected from premature wear. Heating and insulation of the space under the cone is also possible in this way. The compact arrangement of dosing and discharge technology means that even complete plants can be accommodated within stand-alone silos. Lime milk plants are an example of this. These can be completely assembled and wired in the factory and are ready for use on site after a short time. Go ahead and ask us about them! We would be happy to hold talks with you about what appearance a sensible solution might take