The STEINERT EddyC eddy current separator: The new standard Simplify maintenance work on the non-ferrous separator with the new belt change concept In the separation of non-ferrous metals, the new STEINERT EddyC design combines the tried and tested with innovation. STEINERT continues to rely on the established eccentrically mounted magnetic pole system with powerful neodymium-iron-boron magnets and a robust design of all machine elements of its eddy current separators. The core features of the new STEINERT EddyC model series are a self-supporting frame construction that enables faster belt changes, infinitely variable adjustability of the pole system's angle of attack, optimised accessibility to and visibility of the separation area and a fundamentally revised external design. Your benefits at a glance: - eccentric non-ferrous separators based on the STEINERT principle - Proven non-ferrous metal separator technology in a new design - Customised magnetic pole systems available for various applications - Working widths: 500 - 2,500 mm

Reliable sorting of all metals with the STEINERT ISS® induction sorting system Produce metal-free residual material, recover residual metals with the STEINERT ISS® - and for the smallest grain sizes in metal recovery: STEINERT Fines ISS® The STEINERT ISS® induction sorting system is the perfect extension to magnetic sorting and eddy current separation for recovering residual metals from a mixture of materials. These are primarily stainless steels and composite materials such as cables or circuit boards. The focus here can be on the production of valuable metal concentrates, such as Zurik or a stainless steel fraction. However, the processing objective can also be to produce a metal-free residual fraction with <1% metal content to fulfil acceptance qualities, e.g. in the production of substitute fuels. Both tasks are the core applications of the STEINERT ISS®. Your advantages at a glance: - ISS = Induction sorting system - Proven technology for all-metal separation - Two sensor types with different resolutions for customisation to the application - special STEINERT Fines ISS® for fine grain sorting

Our STEINERT KSS | XT CLI combination sorting system - the all-rounder with XRT (X-ray transmission) The multisensory answer to increasingly complex requirements in material separation We have harmonised four sensor systems in this combination sorting system. Two optical sensors provide colour and three-dimensional shape information, the inductive sensor detects metals and X-ray transmission is used to detect differences in density. By logically linking the multi-sensor data recorded for each individual object, a wide variety of tasks can be covered with just one sorting machine. This combination is therefore often integrated into a processing concept as a stand-alone solution in order to significantly increase the sorting depth for smaller mass flows. Individual equipment and programme creation are mandatory. The combination of X-ray transmission (XRT) and 3D enables an additional evaluation of object characteristics and makes our system less sensitive to large differences in the sorting material. STEINERT KSS | XT CLI is a combination of: C = colour detection L = laser (3D detection) I = inductive sensor XT = X-ray transmission

Electromagnetic overbelt separators with high power density - the STEINERT UME Overbelt magnetic separators with electromagnets from our own production in a proven design STEINERT UME electromagnetic overbelt magnetic separators are characterised by their extremely strong and far-reaching magnetic fields. The magnetic field is particularly strong in the centre of the magnet and has a pronounced depth effect. As a result, ferrous parts are reliably detected even from great layer heights. At higher belt speeds and belt widths, these magnets have proven themselves worldwide over many decades. STEINERT UME have a comparatively low power-to-weight ratio due to the special ANOFOL coils made of anodised aluminium strip. ANOFOL coils are insensitive to temperature and, with their rectangular and compact design, fill almost the entire magnetic separator volume. The heat transfer to the outer wall is maximised, which enables a dry design without oil filling. Most overbelt magnetic separators of this type do not require active air cooling. In comparison, round coils have the disadvantage of only partially filling the magnetic separator housing, resulting in a shorter and narrower magnetic field and an increased cooling requirement. Your advantages at a glance: - UME = electromagnetic overband magnetic separator - wide-ranging magnetic field for excavating operation - Self-cleaning • - without oil filling with passive or active air cooling

STEINHAUS GmbH from Mülheim an der Ruhr, the inventor of polyurethane screens, comes to the market with the next revolution. The world's 1st magnet-based and self-centered system sieve bottom. The idea: Installation from below solves the problems arising from EN 1009-4. Tool-free installation even in places that are difficult to access!

Steinhaus Plastic Conveyor Rollers & Polyurethane Support Rings protect your conveyor belts and ensure greater economic efficiency. The use of rings made from our highly wear-resistant polyurethane, in combination with special rollers, means that our idlers achieve optimum service life. An increase in service life by a factor of 3 to 5 as compared with standard rollers is not unusual. Our idlers have a polyethylene wheel tread. In contrast to rollers made from steel, our rollers will not become “razor sharp” in case of a defect, so they will not damage your belt. In addition, their special geometry reduces the likelihood of the rollers jamming.

STEINHAUS screens are produced in a great variety: - in Polyurethane with various sieve openings - as slotted screens in stainless, commercial and Manganese steel - as woven (type) screens - as welded grids or as perforated plates They are used for separating and dewatering: - sand & gravel - crushed hard stone - coal & iron ore - chemical products - foodstuff - and many more on screening and dewatering screens, in centrifuges, filters, kiln floors etc.

Seamless Step bellows are for the flexible connection of mixers, feeders or vessels on weighing cells to supply lines, drain pipes or other forms of air transport or powder transport with 2 different dimension tubing.

Benefit from our STIHL service offers on site. You can view and buy the range of goods from the STIHL catalog from us in Dortmund. Your local STIHL dealer is at Westfaliastraße 13, in 44147 Dortmund. Our expert staff will advise you on the products on offer from the diverse range. Our range includes all STIHL petrol tools STIHL cordless tools STIHL electrical devices STIHL robot lawn mower STIHL clothing from head to toe STIHL spare parts Dortmund Our in-house STIHL service offers you Repairs for your STIHL devices STIHL robotic lawn mower on site advice Official STIHL service for servicing and repairing your STIHL products.

A storage hall for industry and commerce has to be fit for purpose and well thought out. With the aim of maximum economic efficiency, we can support you throughout your individual planning of a hall or roofing for your stored goods.

The perfect timber storage hall is large, bright and well ventilated. We support you in the realisation of your individual timber storage room.

Our storage silos made of aluminum and stainless steel offer robust and reliable solutions for the storage of various types of bulk materials. By using high-quality materials and precise manufacturing techniques, we guarantee first-class quality and durability of our products. Our storage silos are available in different types to meet the individual requirements of our customers. Below you will find a selection of the types we offer: Standard storage silos: These silos provide a cost-effective solution for the storage of bulk materials and are available in various sizes. Panel silos: Panel silos are characterized by their modular construction and are particularly suitable for use on construction sites or locations with limited space. Specialized silos: For specific requirements, we offer customized solutions tailored to the needs of our customers. We offer you a wide variety of different silo solutions.

Type 'Microcell' DMS Sensor With fine, powdered products, therefore, it is often difficult, to get a reliable inventory information with level gauges. In new plants it is recommended that you set the silos on load cells - but what about existing production and storage silos? Hense Wägetechnik GmbH offers a safe and reliable retrofit- solution" based on strain gauge sensors. The temperature compensated sensors are directly bolted to the support member of the silo ( leg or skirts ...). The sensors measure the deflection caused by loading or unloading the silo and converts this into a proportional voltage signal. The instrumentation amplifies and display the signal directly in tons or kg. The result is a maintenance free inventory measurement based on weight.

The Arodo stretch hooders have been specially developed for the quick and efficient packaging of pallets with stretch hoods. Ideal for pallets stacked with bags or FIBCs (flexible intermediate bulk containers). The hood is absolutely watertight and offers optimal protection against all weather conditions and dust. The pallet stability is optimal. Central operation takes place using a touchscreen.

Stützscheiben für Tragrollen Stützscheiben auf Tragrollen überbrücken größere Distanzen zum Fördergurt. Sie Stützen den Gurt und werden vorzugsweise bei Wellenkantengurten oder profilierten Fördergurten im Untertrum eingesetzt. Die Stützscheiben (Gummiringe) von FTK Förderband Technik Kilian GmbH haben einen permanent festen Sitz auf der Tragrolle und zeichnen sich durch abriebfeste Qualität aus. Neben dem bewährten Standard fertigen wir auch Ringe in Sonderqualität, z. B. weiß-Lebensmittelqualität, öl- und fettbeständig oder für den extremen Temperaturbereich (-40°C bis 180°C).