Fusion Screens are a revolutionary screen developed from a new technology that "fuses" the screen mesh to the tension ring. Fusion Screens have been designed to eliminate the use of adhesive, epoxy or silicone in screen manufacturing resulting in a unitary construction that minimizes the potential for contamination. Added benefits include precise repeatable tensioning and engineered uniform integral strain relief created from the complex robotic manufacturing process.

The SWECO HX™ Series Round Separator improves technology and performance while increasing safety and simplifying clean-up and maintenance. The new HX features the ProGlide™, a new top and bottom “no-tools” weight system, which presents fine proportional motion adjustment, enabling the user to move a single weight set radially to dial in on the optimal horizontal and vertical amplitude and force to improve efficiency and throughput. A new lower weight guard encloses the motor and lower weight assembly, reducing the risk of reach-in injuries while complying with CE Standards. The new guard can be easily removed without disassembling the drive.

Switch distributors divert bulk material flows into different outlets. They can be used for dusts, powders, granulates and coarse material. SCHRAGE switch distributors are solid welded steel constructions actuated via hand lever, pneumatic cylinder or shaft-mounted geared motor. They come with a distributor flap, which can be replaced from the outside. Their end positions are monitored by proximity switches. Flange pattern bores are drilled according to SCHRAGE factory standard or customer specifications. The robust SCHRAGE switch distributors can be manufactured in various materials and offer inlet/outlet widths from NW 150x150 to NW 1000x1000. Special designs as bell chute distributors are available on demand.

Flexible impact protection counteracts attacks at critical points. Impact beams in a new modular design support the increasing cost awareness of companies, without compromising on reliable wear protection. This means that lower maintenance and servicing costs and production downtimes can be combined with very good results. The disadvantages of conventionally installed impact beams are their time-consuming installation and the need to completely replace elements that are often only partially worn. It is not possible to react flexibly in places with only partial extreme wear in this way. Our new development now ensures the optimization of impact wear protection. The innovative system consists of assemblies with module components, a base plate and a guide rail for the module components, which allow a variable arrangement. The base plate can be welded to the base body. The assemblies can be combined with module components made of Pucest 65 Shore solid material and with module components with a hard metal surface for areas with the highest impact wear in order to respond to different wear stresses. The advantages of this system are obvious: it allows for quick and easy replacement of impact beam sections that are really worn. This results in low maintenance and servicing costs. Depending on the level of wear

Our platform scales impress with their high robustness, precise measuring accuracy, and attractive price-performance ratio. The scales can be used as overfloor scales, but also as underfloor scales with an additional mounting frame. Numerous variants are available - often with dimensions and load ranges outside the standard sizes. - As overfloor and underfloor installation - With or without big bag suspension - Weighing ranges from 3 kg to 10 t - Manufacturer's initial calibration (optional) - With ATEX approval (optional) - Numerous accessories: Underfloor mounting frame, big-bag rack, ramps, height-adjustable feet, removable cover plate for maintenance etc.

The TailScrape works on the same principle as the AirScrape and complements it by sealing the transfer in the rear area. The intelligent blade structure on the underside ensures that negative pressure is created in the conveying area. Nothing can escape through the millimeter-thick gap because the negative pressure allows air to flow in. Dust generation and spills are reduced by up to 100%. The TailScrape works also without contact to the belt and can therefore be operated permanently without maintenance. Used together with the AirScrape, the TailScrape saves considerable costs and resources. The TailScrape supplements the AirScrape and seals the transfer for optimum results in the rear area of the transfer point.

Our tangential rotary valves are ideal for handling bulk materials with good conveying and flow properties up to a feed size of 35 mm, dependent on the size and the entire particle size range, in flooded feed condition. Because both the rotors and housings are precision-finished to the narrowest tolerances, the rotary valves made by Barl feature the highest possible degree of sealing integrity. Adjustable end plates are as standard as the outside bearing. The rotary valves are naturally also available in both pressure-shock-proof and ATEX-compliant design.

Tapered Trough Tracker Oberband-Zentrier-Station

Application area: The telescopic loading device is used for transshipment of dust-like and granulate bulk materials from silos into road tanker vehicles and railway tank cars. Loading open vehicles and containers is possible using a special design. The transshipment of the products is free of dust if the device is connected to a filter system with 15 - 20 mbar vacuum pressure. Design: The telescopic loading device basically consists of the upper part with pulley and ventilation nozzles, the flow shaft attached with chains and the lower part. If required, a fill level limit switch which prevents overfilling can be installed in the closing cone. A manual or motor-driven winch is used for raising and lowering the device. The motor-driven winch is fitted with a special device which causes automatic retraction of the extended telescopic loading device if the vehicle sets in its springs due to the load of the filling. Depending on the application area, the telescopic loading device can be made of normal steel or stainless steel. Any combination of polyamide cones is possible. The bellows is supplied made of a special fabric depending on the intended use. Throughput: For size DN 200/88: approx. 100 m3/h For size DN 300/88: approx. 150 m3/h. The throughput depends on the bulk material, the silo and the discharge aid.

Tensioner PSE, single-stage 1500 bar maximum operating pressure The one-stage hydraulic tensioner PSE enables screw joint assembly and disassem-bly without torsional stress for the bolt. The pre-tensioning power is precisely adjustable. Its flat design makes the PSE particularly advantageous in axially restricted spaces. The knurled attachment additionally included will also ensure successful tensioner application with bolt protrusions of excessive length. The Plarad tensioners are available in a range of sizes with individual adjustment for every bolting need.

The concept and production of machine components for the maintenance-free tensioning of belts and chain drives has always been a core competence of ROSTA. Whether for the initial tensioning of large belt drives with our self-adjusting motor base suspension or for efficient secondary tensioning by means of easy-to-install chain and belt tensioners, ROSTA has the perfect solution! When using the ROSTA tensioning systems, problems such as the compensation of lengthening due to age and belt slip are no longer an issue in your machine design - you can simply forget the periodical re-tensioning maintenance!

The JEL 200-II sieve analysis machine determines the particle size distribution of bulk materials according to the plane motion principle and delivers reproducible results. It is motor-driven, controlled via a display, and can accommodate up to six sieve frames plus lid and base. The device is suitable for dry, powdery, and coarse-grained materials and supports statements on grinding and processing. Standard-compliant sieve meshes according to DIN ISO 3310 and ASTM E11-87 are used.

• Test sieves made of stainless steel or synthetic fabrics • With test sieve fabric made of DIN ISO 3310-1 stainless steel or woven polyamide • With soft solder seam resistant to temperatures of up to 170°C • Available sieve diameters 50 to 600 mm • Special manufacture also possible, e.g. with handles • Test sieve fabric with mesh sizes from 20 μm to 150 mm • Square perforated metal screens with aperture size from 4 mm to 125 mm • Extensive range of accessories for analytical screening machines, e.g. cover, collecting vessels or seals • Suitable for all current analytical screening machines