Multifill gross scales BE 25 All systems are available individually or as combinations. Due to this flexibility, you require only one machine for different applications. Valve Bags only 80-120 b/h (2-3to/h) - Basic unit with control - Pneumatic bag clamp - Adjustable bag chair - Optional drive chassis or fork lift device - Certified weighing control Open bags only 80-120 b/h (2-3to/h) Sealing device behind the bag spout - Basic unit with control - Bag spout with pneumatic clamp - Integrated welding system - Adjustable bag chair with bag shaker - Optional drive chassis or fork lift device - Certified weighing control Open bags only 100-160 b/b (2.5-4 to/h) with lateral welding system - Basic unit with control - Bag spout with pneumatic bag clamp - Adjustable bag chair with bag shaker - Optional drive chassis or fork lift device - Bag deposit with height-adjustable roll conveyor - Certified weighing control Valve and open bags 80-120 b/h (2-3 to/h) - Bag spout with quick-release connection for valve or open bags - Pneumatic bag agitator for open bags - Bag bench with parallel guide for gland bags - Welding system with electronic fusing - Certified weighing control

The Multifunctional Sample Carousel enables the fully automatic sampling of samples with varying sizes. You determine the size of the samples, and how many samples of a particular size you need. Whereas the Sample Carousel could already take multiple samples completely automatically, the Multifunctional Sample Carousel takes things one step further. As the name suggests, this solution allows you to specify exactly what the sample sizes should be and how many samples of those sizes should be taken.

Multotec hydrocyclones are used across the world for applications in mineral processing, manufacturing, food processing, waste water treatment and other industries. This industry-proven product range of classification, dense medium and tailings dam cyclones has been optimised over hundreds of applications across the world to improve classification efficiency, provide greater lifespan and reduce energy requirements. Scrolled evolute design improves capacity and reduces wear rates compared to regular hydrocyclone inlets Customised cyclone designs according to your unique specifications Designed for fine and accurate cut-points Innovative designs reduce misplacement of product; rubber lips prevent spillage Abrasion and heat resistant materials reduce wear Innovative weep holes reduce downtime Our broad and varied selection of standard cyclones includes units sized from 25 to 1450 mm. Our cyclones are designed by an experienced team of experts to meet the requirements of our customers in the best possible way. If you need tailor-made solutions for specialised applications, we will design and produce our cyclones to match the specific requirement.

For over 40 years MULTOTEC – a sister company to STEINHAUS GmbH – has been producing a wide range of machines and wear parts for treatment technology. In South Africa, Australia and America – in fact, everywhere in the world in major mineral processing plants – “made by MULTOTEC” is a synonym for high quality, operational reliability and maximum profitability. STEINHAUS GmbH is bringing the tried and tested slurry pumps, together with spare parts fully compatible to other OEM Equipment to Europe. We supply a complete range of pumps for medium and heavy duty slurry applications, including cyclone feed, spirals feed, mill discharge, tailings disposal, filter feed, effluent discharge and spillage. Available with short lead times, the pumps are designed to efficiently transfer abrasive and corrosive slurries in wide range of industries, from mining and mineral processing to pulp and paper and wastewater treatment.

The proven technology sorts different materials according to their density using the centrifugal flow. The lighter particles are thus flushed outward and the heavier particles inward. Our spirals are simple to install, are distinguished by their long service life and, as a static system with no moving parts, energy and maintenance costs are reduced to a minimum. Multotec-designed spiral concentrators are used across the world in coal, gold, iron ore, mineral sands, platinum and chrome processing plants and other minerals. We manufacture a wide range of spiral sizes and configurations that can be optimised to your application. The benefits of the Multotec Spiral Concentrator: Beneficiate material between 38 and 2000 um, depending on ore type Available in single, double and triple starts Spirals range between small diameter (+/- 560 mm) and large diameter (+/- 950 mm) 3 to 12 turn spirals as required by your application High separation efficiency reduces the number of stages on a plant, reducing overall footprint Sliding or auxiliary splitters can be used to achieve targeted grades and recoveries Auto Reject Channel® offers excellent removal of unsuitable particles Trough surfaces are sprayed with polyurethane to required thickness to improve the service life of the spirals

Applications Vibrating conveyors for frozen food and fruit / vegetable washing, fluid beds for drying grains and / or powders, trabatti for pasta, vibrating screens for classification according to size, etc. The MVE-SS stainless steel external electric vibrators can be used as flow aids, on container activators to improve material discharge and as drives on vibrating machines for various purposes such as transport, sieving, sizing, mainly in the processing industry food, such as chemical waste or pharmaceutical industry. When the MVE-SS is turned on, a sinusoidal centrifugal force is provided by rotating the eccentric weights. With a single MVE mounted on a vibrating machine a rotating force is provided which causes a circular movement of the machine. Two MVE-SS mounted in parallel on the same machine provide a linear force which determines a linear movement of the machine. The requirement for circular or linear movement depends on the application. Features Centrifugal force: 105 ~ 500 kg Windings with vacuum impregnation Class F insulating materials High quality bearings Robust housing designed by FMEA Body in AISI 316 with mass covers in AISI 304 Features Centrifugal force: 105 ~ 500 kg Windings with vacuum impregnation Class F insulating materials High quality bearings Robust housing designed by FMEA Body in AISI 316 with mass covers in AISI 304 Certifications ATEX ExII3D and CRUUS Conform to UL1446 and CSA 22.2 No 0-10 Options 2, 4, 6, 8 three-phase poles

Applications Vibrating machines in general. Vibrating screens, conveyors and vibrating extractors, compaction tables, foundry diggers, fluid beds, spiral elevators. Features Centrifugal force: 20 ~ 26,000 kg Voltages 12 and 24 VDC, from 220 to 690VAC Windings impregnated under vacuum with class F insulating materials Optimized design and components for demanding applications. Advantages Greased for life = Zero maintenance * Wide range of centrifugal forces for all applications Different voltages available for global applications * for special applications contact our technical service Certifications ATEX Ex II2 D and ETL, Class II, Division 2 Options 2, 4, 6, 8 poles, three-phase 2 single phase poles Direct current Accessories Standard PTC from size 60 (available on request for smaller sizes) Half-Split covers for quick mass adjustment – on request from size 60 Stainless steel covers on request from size 23 Anti-corrosion painting for ” food ” applications Extended motor shaft for connection of multiple units with mechanical coupling

APPLICATIONS - dump trucks - agricultural machinery POWDER Moisture binding - wet, sticky or granulated PROBLEM SOLVING - loosening and dissolving FEATURES WORKING CYCLE - continuous operation - S1 WORKING PRESSURE - From 15 bar to 30 bar (from 217 psi to 4,350 psi) HYDRAULIC CIRCUIT - Regulator + filter (mesh size 30-60 micron) STROKE SPACE - 3.12 cc/round AMBIENT TEMPERATURE - From -20 °C to 60 °C (from -4 °F to 140 °F) OIL VISCOSITY - From 20mm²/sec to 100mm²/sec OIL-ART - HLP HV (D in 51524) Hydraulic mineral oil FLOW QUANTITY - 2.24 l/min (700 rpm) - 9.6 l/min (3,000 rpm) - 19.2 l/min (6,000 rpm) MAX. NOISE LEVEL - 80 dB(a) ENGINE TYPE - XV-1M/3.2 TECHNOLOGY - Hydraulic circular transducer MATERIAL - Cast iron housing (powder coated in RAL 2004)

MYTOS integrates the established core technologies of HELOS laser diffraction and RODOS dry dispersion in a single robust body: a process-proven laser diffraction sensor for dry powders ranging from 0.25 µm to 3,500 µm. In combination with continuously operating sampling system TWISTER a complete integration into the processing pipe is realised making it a true in-line solution delivering representative results. Alternatively, MYTOS may be operated on-line either with TWISTER, MIXER, L-probes or existing sampling solutions. Integrated at-line operation in automated lab environments is succeeded with vibratory feeder VIBRI. For instance, typical applications comprise milling operations or spray granulation. The process-specific laser diffraction sensor finds a range of applications from cement to pharmaceuticals, from roughest industrial conditions to GMP environments. If required, the system may be configured for ATEX zones. » RODOS at MYTOS | injection disperser for finest, even cohesive powders | 0.25 µm to 3,500 µm » VIBRI | vibratory feeder for precise dosing with adaption to proprietary sampler or for manual feeding (in at-line combination with MYTOS) » TWISTER | dynamic, representative sampler for installation in process pipes (in-line or or on-line in combination with MYTOS) » MIXER | static mixer for representative sampling behind screw feeder or feeding » L-probes | compact sampler with blow back unit or with pivoting option MYTOS | TWISTER & Co. bundle innovative technologies for superior performance and foresighted capacity planning: » Real-time particle size analysis with laser diffraction of perfectly dispersed powders with up to 2,000 measurements per second » Representative sampling in or out of process pipes in the diameter range from 38 to 660 mm at product temperatures of up to 150°C with TWISTER » Comparability to the established off-line laser diffraction system HELOS | RODOS that share the same core components for a valid method transfer

A WHOLE NEW STANDARD OF HYGIENE, CLEANING AND SAFETY Make a rotary valve easier to clean and it will lead to better and deeper cleaning than ever before. Our engineers took on the challenge and surpassed all expectations. The result? A rotary valve that is all about easier access, opening on both ends instead of one for unprecedented cleanability. FUTURE-PROOF INNOVATION FOR A BROAD RANGE OF INDUSTRIES The new MZC-II is designed around intuitive cleaning and incredibly easy access. This allows for cleaning at an unseen level of hygiene. Which in turn, makes the MZC-II rotary valve a perfect fit for all sectors inside the dry bulk industry from dairy, pharma, food, cosmetics to the paint industry. With the hygiene regulations becoming stricter over a broad range of industries. ABSOLUTELY SPOTLESS IS THE NEW STANDARD Due to the nature of materials being handled small particles will always remain trapped within the rotary valve. From now on, the new MZC-II makes it easier than ever to get rid of every trace of powder residue. Truly deep, safe and hygienic cleaning will be the new standard that this new rotary valve concept is bringing into the world.

REMOTE MONITORING FOR BELT CLEANERS From Your Mobile Device (Android & IOS) or computer The intuitive N2® Position Indicator allows for remote monitoring of the belt cleaner blade via Martin's proprietary mobile app, indicating remaining blade life, notifying when re-tensioning or replacement is required, and warning in the event that the blade is no longer in contact with the belt.

Specially developed for applications involving slag, this drive belt ensures reliable power transmission and stable operation even under harsh operating conditions. The result is smooth plant operation with high operational reliability.

Nauta® Mixer – Conical Screw Mixer The Nauta® conical screw mixer provides gentle, low-shear batch mixing of powders, pastes, and slurries while preserving particle integrity and achieving high homogeneity. Its conical vessel with a cantilevered, orbiting screw ensures precise, energy-efficient mixing and predictable scale-up from lab to production. Nauta® is the global benchmark for powder mixing technology. The mixer handles free-flowing, fragile, or segregative powders with consistent quality at 15 to 100 percent fill levels. It can be configured for heating, cooling, drying including vacuum, and humidification. A bottom discharge valve ensures complete emptying, reducing manual handling and cross-contamination. Optional CIP or SIP cleaning and operation under vacuum or pressure increase flexibility. Nauta mixers can also act as live hoppers, feeding downstream equipment such as fluid bed dryers. They are energy-efficient, fully ATEX-compliant, and available in sizes from 5 to 100,000 liters. Applications include chemicals, minerals, food, pharmaceuticals, cosmetics, plastics, and specialty chemicals. Operators benefit from reliable performance, gentle handling of delicate products, and versatile process options that ensure consistent product quality. Hosokawa Micron’s Nauta mixers combine innovation, sustainability, and efficiency, making them a trusted choice for industrial batch mixing around the world.

At Solids 2023, the company is presenting a functional model for dust binding, showing the trade fair public the dust binding process in bulk solids processing on a small scale to demonstrate the principle of operation on a large scale.

NEBOLEX Umwelttechnik GmbH is a medium-sized company that has set itself the goal of protecting people and the environment from dust and odour emissions. We are one of the leading international companies in the dust binding industry. Our strength is our team, which is characterised by passion and experience in various fields.